1. Introduktion
The SINGCALL APE590 is a compact and stylish wireless call button designed for use in guest paging and management systems. It serves as an emergency calling device, facilitating fast and efficient service in various environments such as restaurants, bars, and hospitals. This manual provides essential information for the proper setup, operation, and maintenance of your APE590 call button.
2. Produktet er slutview
2.1 Nøglefunktioner
- Kompakt design: Small, thin, and modern aesthetic.
- Tactile Button: Features a comfortable silica gel key for easy pressing.
- Brugervenlig: Simple push-button operation and straightforward registration process to prevent signal interference.
- Robust ydeevne: Designed with strong EMC anti-interference capabilities and stable signal transmission, resistant to temperature and humidity changes.
- Alsidig: Numbers can be easily changed, offering strong reusability.
- Kompatibilitet: Fully compatible with all SINGCALL receiver units.
- Vandtæt: Daily waterproof functionality for enhanced durability.
- Nem installation: Includes a sticker for convenient fixing of the call button.
2.2 Komponenter
Pakken indeholder:
- 1 x SINGCALL APE590 Wireless Call Button
Figur 1: Forside view of the APE590 Call Button
Figur 2: Tilbage view of the APE590 Call Button with mounting points
3. Opsætning
3.1 Pairing with a Receiver
The APE590 call button must be paired with a compatible SINGCALL receiver unit to function. The pairing process is designed to be simple and prevent signal conflicts. Please refer to the instruction manual of your specific SINGCALL receiver model for detailed steps on how to register and pair the APE590 call button.
General Pairing Steps (Consult Receiver Manual for specifics):
- Put the SINGCALL receiver into pairing/registration mode.
- Press the silica gel button on the APE590 call button.
- The receiver should confirm successful registration (e.g., with a beep or display update).
- Test the connection by pressing the call button again.
3.2 Mounting the Call Button
The APE590 call button can be easily fixed to a surface using the included adhesive sticker.
- Clean the desired mounting surface thoroughly to ensure it is free of dust, grease, and moisture.
- Peel off the protective backing from the adhesive sticker on the back of the call button (refer to Figure 2).
- Press the call button firmly onto the cleaned surface for several seconds to ensure a secure bond.
- Allow the adhesive to set for a few hours before regular use, if possible.
4. Betjeningsvejledning
Once the APE590 call button is paired with a receiver and properly mounted, its operation is straightforward:
- To send a call signal, simply press the large silica gel button on the front of the unit.
- The signal will be transmitted wirelessly to the paired SINGCALL receiver, which will then alert staff according to its programmed settings.
5. Vedligeholdelse
5.1 Rengøring
The APE590 call button is designed with daily waterproof capabilities. To clean the unit:
- Tør overfladen af med en blød, damp klæde.
- Avoid using harsh chemicals, abrasive cleaners, or submerging the unit in water.
- Ensure the unit is dry before continued use.
5.2 Udskiftning af batteri
The APE590 call button is powered by an Alkaline 12V 23A battery, with an estimated life of 12-18 months depending on usage. When the battery is low, the signal strength may decrease, or the unit may stop functioning.
Sådan udskiftes batteriet:
- Carefully detach the call button from its mounting surface if necessary.
- Find batterirummet på bagsiden af enheden.
- Open the battery compartment (this may require a small screwdriver or prying tool, depending on the design).
- Remove the old 12V 23A battery.
- Insert a new Alkaline 12V 23A battery, ensuring correct polarity (+/-).
- Luk batterirummet forsvarligt.
- Re-attach the call button to its mounting surface.
- Test enheden for at sikre, at den fungerer korrekt.
6. Fejlfinding
If you encounter issues with your APE590 call button, try the following troubleshooting steps:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Call button does not respond or receiver does not get signal. |
|
|
| Receiver shows "messy code" or incorrect number. |
|
|
| Call button feels unresponsive or sticky. |
|
|
7. Specifikationer
| Attribut | Værdi |
|---|---|
| Modelnummer | APE590 |
| Mærkenavn | SINGCALL |
| Dimensioner (L*B*H) | 2.1 x 2.1 x 0.7 tommer (53.53 x 53.53 x 17 mm) |
| Vægt | 0.09 g |
| Materiale | ABS plast |
| Overfladefinish | Dull polish |
| Nøglemateriale | Silicagel |
| Frekvens | 433.92 MHz |
| Batteritype | Alkaline Battery 12V 23A (Included) |
| Batterilevetid | 12-18 months (approx.) |
| Vandtæt vurdering | Daglig vandtæt |
| Certificeringer | CE, FCC, RoHS |
| Oprindelse | Fastlandet Kina |
8. Brugertips
Based on common usage scenarios and feedback for similar devices, consider the following tips for optimal performance:
- Optimal placering: Position call buttons in easily accessible locations for users, ensuring they are within the effective range of the receiver. Avoid placing them behind large metal objects or thick walls that could obstruct the signal.
- Regelmæssig test: Periodically test all call buttons to ensure they are functioning correctly and communicating with the receiver, especially after battery replacement or system changes.
- Batteriovervågning: While the battery life is extensive, consider a schedule for checking or replacing batteries in all units to prevent unexpected service interruptions.
9. Garanti og support
The SINGCALL APE590 Wireless Call Button is manufactured to high-quality standards and holds CE, FCC, and RoHS certifications, ensuring compliance with relevant safety and environmental directives.
For specific warranty information, technical support, or service inquiries, please contact your original seller or the SINGCALL manufacturer directly. Keep your purchase receipt or order details handy when contacting support.
