8BitDo PS4 Pro Arcade Controller Switch Instruction Manual

8BitDo PS4 Pro Arcade Controller Switch

PRODUKT OVERVIEW

1. Mode switch
2. Turneringslåskontakt
3. Vise
4. Ultimate button
5. Par-knap
6. Status-LED
7. Hjem-knap
8. Square butto
9. L3 knap
10. R3 knap
11. VÆLGE
12. Starte
13. Adapter compartment switch
14. USB-C
15. 2.4G adapter / Adapterrum
16. USB-C

Vise

• Press the Ultimate button to enter or exit the Built-in Ultimate Software. Game input will be disabled while operating the Built-in Ultimate Software.
• The Built-in Ultimate Software cannot be operated when the Tournament lock switch is enabled.

Hovedskærm

The default main screen displays status information.

Menu

• Button mapping, SOCD mode, lighting, display, language, and other settings can be configured in the Built-in Ultimate Software.

• Use the D-pad to navigate, press B button to go back, and A button to select.

Windows

• System requirement: Windows 10 (1903) or above.
Trådløs forbindelse

1. Drej tilstandskontakten til X-position.
2. Tilslut adapteren til USB-porten på din Windows-enhed.
3. After the connection is complete, the Status LEDs on both the Arcade Controller Pro and the adapter will remain solid.

Kablet tilslutning

1. Drej tilstandskontakten til X-position.
2. Connect the Arcade Controller Pro to your Windows device via the USB cable, wait until the Arcade Controller Pro is successfully recognized by the Windows device.

Skifte

• System requirement: 3.0.0 or above.
Bluetooth-forbindelse

1. Drej tilstandskontakten til S-position.
2. Tryk og hold parringsknappen nede i 3 sekunder for at aktivere parringstilstanden. Status-LED'en blinker hurtigt. (Dette er kun nødvendigt den allerførste gang)
3. Gå til din Switch-startside for at klikke på "Controllere", og klik derefter på "Skift greb/rækkefølge". Status-LED'en vil lyse konstant for at indikere en vellykket forbindelse.

Turneringslåskontakt

Turn the Tournament lock switch to Lock position, Pair button, Ultimate button, Home button, L3 button, R3 button, Square button, SOCD mode(neutral by default), and Built-in Ultimate Software will be disabled, to prevent unintentional inputs from impacting game.

Batteri

• Built-in 3000mAh battery pack, 15 hours of usage time via Bluetooth connection and 15 hours of usage time via wireless 2.4G connection, rechargeable with 4 hours charging time.
• The Arcade Controller Pro will automatically shut down if it fails to connect within 1 minute of startup, or if there are no operations within 15 minutes after establishing a connection.
• The Arcade Controller Pro will not shut down during wired connection.
• Charging time and battery life depend on variations in settings or environmental factors, and actual results may vary.

Par adapteren igen
If the Arcade Controller Pro is disconnected from the adapter or the adapter is replaced, you can re-pair it by following these steps:

1. Drej tilstandskontakten til X-position.
2. Turn the Tournament lock switch to Unlock position.
3. Tryk og hold parringsknappen nede i 3 sekunder for at aktivere parringstilstanden. Status-LED'en blinker hurtigt.
4. Connect the adapter to the USB port of your Windows device, wait for the Arcade Controller Pro to automatically pair and connect with the adapter.
5. After the connection is complete, the Status LEDs on both the Arcade Controller Pro and the adapter will remain solid.

Sikkerhedsadvarsler

• Brug altid batterier, opladere og tilbehør leveret af producenten.
• Producenten er ikke ansvarlig for eventuelle sikkerhedsproblemer, der opstår ved brug af tilbehør, der ikke er godkendt af producenten.
• Forsøg ikke selv at adskille, modificere eller reparere enheden. Uautoriserede handlinger kan resultere i alvorlig personskade.
• Undgå at knuse, skille ad, punktere eller forsøge at modificere enheden eller dens batteri, da disse handlinger kan være farlige.
• Enhver uautoriseret ændring eller modifikation af enheden vil ugyldiggøre producentens garanti.
• Dette produkt indeholder små dele, der kan forårsage kvælning. Ikke egnet til børn under tre år.
• Dette produkt har blinkende lys. Personer med epilepsi eller lysfølsomhed bør deaktivere lyseffekterne før brug.
• Kabler kan forårsage snuble- eller sammenfiltringsfare. Hold dem væk fra gangstier, børn og kæledyr.
• Stop med at bruge dette produkt med det samme, og søg lægehjælp, hvis du oplever svimmelhed, synsforstyrrelser eller muskelspasmer.

Ultimativ software
Please visit [app.8bitdo.com](http://app.8bitdo.com/) to download and use Ultimate Software V2 for Windows / macOS platforms.
Støtte
Please visit [support.8bitdo.com](http://support.8bitdo.com/) for further information & additional support.

Fejlfinding

Controller Disconnected from Adapter / Adapter Replaced

1. Drej tilstandskontakten til X-position.
2. Turn the Tournament lock switch to Unlock position.
3. Press and hold the Pair button for 3 seconds; the Status LED will blink rapidly.
4. Connect the adapter to the USB port of your Windows device. The controller will automatically pair.
5. Once connected, the Status LEDs on both the Arcade Controller Pro and the adapter will remain solid.

Ultimativ software

Visite [app.8bitdo.com](http://app.8bitdo.com/) para descargar y usar Ultimate Software V2 para plataformas Windows/macOS.

Soporte

Visite [support.8bitdo.com](http://support.8bitdo.com/) para obtener más información y asistencia adicional.