Vigtige sikkerhedsoplysninger
Læs venligst alle instruktioner omhyggeligt inden montering og brug. Gem denne manual til senere brug.
- Saml altid kommoden på en blød, ren overflade for at undgå ridser.
- Sørg for, at alt hardware er forsvarligt fastspændt før brug. Kontroller regelmæssigt og efterspænd efter behov.
- Anti-tipping enhed: It is crucial to install the included anti-tipping protection kit to prevent accidental tipping, especially in households with children or pets. Secure the dresser to a wall stud using the provided hardware.
- Lad ikke børn klatre op på eller lege med kommoden.
- Distribute weight evenly in drawers to maintain stability. Do not overload drawers.
Pakkens indhold
Kontroller, at alle komponenter er til stede, før monteringen påbegyndes. Hvis der mangler eller er beskadigede dele, bedes du kontakte kundeservice.
- Kommodepaneler (top, bund, sider, bagside)
- 6 Drawer Boxes
- 6 Golden Metal Handles
- Drawer Slides/Rollers
- Anti-Tipping Kit
- Samlebeslag (skruer, dyvler, kamlåse osv.)
- Assembly Tools (basic wrench/screwdriver, if included)
Opsætnings- og monteringsvejledning
Assembly is designed to be straightforward with clearly labeled parts and detailed instructions. An estimated assembly time is 1-3 hours, depending on experience.
- Forbered dit arbejdsområde: Clear a spacious area and lay out all components on a soft, clean surface to prevent damage. Identify all parts using the included parts list.
- Saml hovedrammen: Attach the side panels to the bottom panel using the designated hardware (e.g., cam locks and dowels). Ensure the grooves for the back panel are correctly oriented.
- Installer skuffeskinner: Secure the drawer slides to the inner sides of the dresser frame using the provided screws. Ensure they are level and aligned.
- Fastgør toppanelet: Place the top panel onto the assembled frame and secure it with the appropriate hardware.
- Saml skuffer: Construct each of the 6 drawer boxes. Attach the drawer slides to the sides of each drawer box. Install the golden metal handles onto the front of each drawer.
- Indsæt skuffer: Carefully slide each assembled drawer into its corresponding slot in the dresser frame. Ensure smooth operation.
- Installer bagpanelet: Slide the back panel into the grooves on the rear of the dresser and secure it with small nails or screws.
- Installer anti-tipping-sæt: Position the dresser in its final location. Secure the anti-tipping strap or bracket to the top rear of the dresser and then to a wall stud using the provided screws. This step is critical for safety.
Betjeningsvejledning
The Garvee 6-Drawer Dresser is designed for convenient storage and organization.
- Brug af skuffe: Gently pull the golden metal handles to open drawers. Push firmly to close. Avoid slamming drawers to ensure longevity of the slides.
- Vægt kapacitet: Each drawer is designed to hold up to 30 pounds (13.6 kg). The reinforced countertop can support up to 330 pounds (150 kg). Do not exceed these limits.
- Opbevaring: Utilize the six spacious drawers for organizing clothes, books, accessories, and other household items. The top surface can be used for decorative items, lamps, or as a TV stand.
Opretholdelse
Korrekt pleje vil sikre din kommodes lange levetid og udseende.
- Rensning: Tør overflader af med en blød, damp klud. Undgå skrappe kemikalier eller slibende rengøringsmidler, som kan beskadige overfladen.
- Spild: Tør straks eventuelle spild op for at forhindre pletter eller vandskader på det konstruerede træ.
- Eksponering for sollys: Undgå langvarig direkte sollysudsættelse for at forhindre falmning eller misfarvning af finishen.
- Hardwarekontrol: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten as needed.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Skufferne glider ikke gnidningsløst. | Forkert justerede skuffeskinner eller løse beslag. | Check alignment of drawer slides on both the drawer and the frame. Tighten all screws on the slides. Ensure drawers are not overloaded. |
| Kommoden føles ustabil eller vaklende. | Løst monteringsudstyr eller ujævnt gulv. | Ensure all assembly screws are fully tightened. If the floor is uneven, place shims under the dresser's base to level it. Verify the anti-tipping device is securely installed. |
| Handles are loose. | Screws attaching handles have loosened. | Tighten the screws from inside the drawer that secure the handles. |
| Ridser eller mindre overfladeskader. | Utilsigtet stød eller slibende rengøring. | For minor scratches, a furniture repair pen or wax stick matching the color may be used. Avoid abrasive materials for cleaning. |
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Garvee |
| Modelnavn | PTH_33DD |
| Produktmål (D x B x H) | 15.7 cm x 54.1 cm x 31.5 cm |
| Antal skuffer | 6 |
| Farve | Lyserød |
| Materiale | Konstrueret træ |
| Finish Type | Poleret |
| Varens vægt | 101.4 pund |
| Skuffes vægtkapacitet | 30 pund pr. skuffe |
| Bordpladens vægtkapacitet | 330 pund |
| UPC | 824126747089 |
Garanti og support
Garvee products are designed for quality and durability. For any questions, concerns, or assistance with your Garvee 6-Drawer Dresser, please contact our customer service team.
- Kundeservice: Please refer to your purchase documentation or the seller's information on the platform where you purchased the product for direct contact details.
- Returnerer: This product typically includes a 30-day easy return policy. Refer to your purchase platform for specific return procedures.
- Beskyttelsesplaner: Udvidede beskyttelsesplaner kan muligvis købes separat. Kontakt din forhandler for muligheder såsom 2-årige eller 3-årige beskyttelsesplaner.