Hilitand AC 110V Swimming Pool Pump Timer User Manual

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your Hilitand AC 110V Swimming Pool Pump Timer. This programmable timer is designed to automate the ON/OFF cycles of your swimming pool pump, heater filter, and other outdoor water systems, enhancing efficiency and convenience. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Sikkerhedsoplysninger

WARNING: Risk of Electric Shock. Installation should be performed by a qualified electrician or service personnel in accordance with all local and national electrical codes.

• Afbryd altid strømmen ved afbryderen, før du installerer eller servicerer timeren.
• Ensure the timer is installed in a location protected from direct water spray and excessive moisture, despite its durable design.
• Kontroller, at voltage and current ratings of your pump or appliance do not exceed the timer's specifications.
• Forsøg ikke selv at åbne eller reparere timeren. Overlad al service til kvalificeret personale.
• Hold børn væk fra elektriske apparater.

Pakkens indhold

Carefully unpack your timer and verify that all items are present and undamaged. If any items are missing or damaged, please contact customer support.

• 1 x Hilitand Pool Pump Timer (with upper and lower cover)
• 2 x stik
• 2 x skiver
• 4 x skruer
• 1 x brugermanual

Image: Contents of the Hilitand Pool Pump Timer package, including the timer unit, two connectors, two washers, four screws, and the user manual.

Produkt overview

The Hilitand AC 110V Pool Pump Timer features a robust design and user-friendly interface for reliable operation.

• Programmerbar kontrol: Supports up to 28 ON/OFF cycles per day, allowing for precise scheduling over a 7-day cycle.
• Brugervenlig grænseflade: Equipped with an easy-to-read LCD display for simplified programming and monitoring.
• Holdbar konstruktion: Made from robust PC material, designed to withstand outdoor conditions from -10°C to 40°C (14°F to 104°F).
• Power Backup: Includes a built-in 200mAh lithium-ion battery, providing up to 60 days of operation during power outages to retain settings.
• Alsidig anvendelse: Suitable for swimming pool pumps, heater filters, and various other outdoor water systems requiring timed control.

Billede: Forside view of the Hilitand Pool Pump Timer, enclosed in its clear protective casing, showing the digital display and control buttons.

Specifikationer

Image: The Hilitand Pool Pump Timer with its dimensions clearly marked: 90mm (3.5in) width, 158mm (6.2in) height, and 64mm (2.5in) depth.

Opsætning og installation

Follow these steps for safe and correct installation of your timer.

1. Montering af timeren

1. Choose a suitable outdoor location that is easily accessible, protected from direct sunlight, and within reach of the power source and the appliance to be controlled.
2. Use the provided screws to securely mount the timer's housing to a flat, stable surface. Ensure the housing is level.

2. Ledningsinstruktioner

IMPORTANT: Ensure power is OFF at the circuit breaker before proceeding with any wiring.

• Open the timer's protective cover.
• Identify the input terminals (power supply) and output terminals (to appliance). Refer to the wiring diagram usually printed inside the timer or on the unit itself.
• Connect the AC 110V power supply wires to the input terminals. Use appropriate wire gauges for your application.
• Connect the wires leading to your pool pump or heater filter to the output terminals.
• Ensure all connections are tight and secure. Use the provided connectors and washers to seal cable entries, maintaining the timer's weather resistance.
• Luk beskyttelsesdækslet forsvarligt.

Image: The Hilitand Pool Pump Timer with its clear outer casing removed, revealing the internal timer unit and the wiring terminals at the bottom for electrical connections.

Betjeningsvejledning

Familiarize yourself with the control panel buttons:

• C/R: Clear/Reset button.
• D+: Day adjustment.
• H+: Hour adjustment.
• M+: Minute adjustment.
• P: Program button (to enter/exit programming mode).
• Urikon: Set current time/day.
• Manual: Manual ON/OFF/AUTO override.

Billede: Et nærbillede view of the Hilitand Pool Pump Timer's control panel, showing the LCD display and the various buttons for setting time and programming.

1. Indstilling af aktuel tid og dag

1. Tryk på Ur-ikon knap.
2. Mens du holder Ur-ikon, tryk D+ for at indstille den aktuelle ugedag.
3. Mens du holder Ur-ikon, tryk H+ for at indstille den aktuelle time.
4. Mens du holder Ur-ikon, tryk M+ for at indstille det aktuelle minut.
5. Slip Ur-ikon knappen. Tiden er nu indstillet.

2. Programmering af tænd/sluk-cyklusser

Timeren understøtter op til 28 tænd/sluk-programmer. Hvert program består af en tænd- og en slukketid.

1. Tryk på P én gang. Displayet viser "1 ON".
2. Trykke D+ for at vælge dag(e) for dette program (f.eks. man-fre, lør-søn, hver dag, bestemte dage).
3. Trykke H+ for at indstille den ønskede ON-time.
4. Trykke M+ for at indstille det ønskede ON-minut.
5. Trykke P igen. Displayet vil vise "1 OFF".
6. Trykke D+ to select the day(s) for this OFF program (usually matches the ON program).
7. Trykke H+ to set the desired OFF hour.
8. Trykke M+ to set the desired OFF minute.
9. Repeat steps 1-8 for additional ON/OFF programs (up to 28).
10. Når du har indstillet alle de ønskede programmer, skal du trykke på Ur-ikon knappen for at afslutte programmeringstilstanden og vende tilbage til visning af det aktuelle klokkeslæt.

3. Manual Control / Override

De Manuel button allows you to override the programmed settings temporarily.

• Tryk på Manuel knappen gentagne gange for at skifte mellem tilstande:
• PÅ: The appliance will remain ON continuously, overriding all programs.
• OFF: The appliance will remain OFF continuously, overriding all programs.
• BIL: The timer will operate according to the programmed ON/OFF cycles. This is the standard operating mode.

4. Nulstilling af timeren

To clear all settings and reset the timer to its factory defaults, press the C/R button using a pointed object (e.g., a pen tip). You will then need to re-set the current time and all programs.

Opretholdelse

• Rensning: Tør timerens yderside af med en blød, tør klud.amp cloth. Do not use abrasive cleaners or solvents. Ensure the protective cover is always clean and clear for display visibility.
• Batteri-sikkerhedskopi: The built-in lithium-ion battery maintains time and program settings during power outages. No user maintenance is required for the battery. If the display is blank or settings are lost frequently after power interruptions, the battery may need professional servicing.
• Inspektion: Periodically inspect the wiring connections and the timer housing for any signs of damage or wear.

Fejlfinding

Garanti og support

Hilitand products are manufactured to high-quality standards. For warranty information or technical support, please refer to the specific warranty card included with your product or contact Hilitand customer service through the retailer where the product was purchased. Please have your model number (AC 110V) and purchase date available when contacting support.