1. Introduktion
The AOPUTTRIVER AP-5000Y is a versatile hot wire anemometer designed for accurate measurement of wind speed, airflow (CFM/CMM), and temperature. Its retractable, 360° revolving probe allows for precise measurements in various environments, including tight spaces like HVAC ducts. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your device.
2. Hvad er der i æsken
- AP-5000Y Hot Wire Anemometer Unit
- Lærredstaske
- Instruktionsmanual
- Datakabel (Type-C)
Image: Contents of the AP-5000Y package, showing the anemometer, canvas bag, instruction manual, and Type-C data cable.
3. Opsætning
Before initial use, it is crucial to connect the internal battery and fully charge the device.
- Tilslut batteriet:
Locate the battery compartment on the back of the device. Use a small screwdriver to remove the battery cover. Connect the battery line interface to the corresponding port inside the compartment. Ensure a secure connection.
Image: Detailed steps for connecting the internal battery. This involves removing the battery cover with a screwdriver, connecting the battery cable, and then securing the cover.
- Fastgør batteridækslet:
Once the battery is connected, carefully place the battery back into its compartment and tighten the cover using the screwdriver. - Oplad enheden:
Connect the provided Type-C data cable to the anemometer and a suitable USB power source. The device is powered by a 600mAh lithium-ion battery. The battery icon on the LCD will indicate charging status. Charge until the battery icon shows a full charge. Note: The device cannot be turned on while it is charging.
4. Betjeningsvejledning
4.1 Enhed overview og kontroller
Image: Labeled diagram of the AP-5000Y anemometer, highlighting the LCD screen, power button, mode selection, unit selection, data retention, and the retractable sensor probe with its protective cover.
- On/Off knap: Tryk for at tænde eller slukke enheden.
- MODE knap: Cycles through different measurement functions (Air Speed, Air Volume, Temperature).
- UNIT knap: Changes the measurement units for the selected function (e.g., m/s, km/h, ft/min, knots, mph for wind speed; CFM/CMM for airflow; °C/°F for temperature).
- MAX/MIN/AVG Button: Toggles between maximum, minimum, and average values recorded during a measurement session.
- SET -knap: Used for data retention (data hold) and other settings.
- LCD-skærm: Shows real-time measurements, units, battery status, and other indicators. Features a backlight for visibility in low-light conditions.
4.2 Udførelse af målinger
- Tænd: Press the On/Off button to turn on the anemometer. The LCD display will illuminate.
- Vælg tilstand: Tryk på MODE button to choose between wind speed, airflow, or temperature measurement.
- Vælg enheder: Tryk på ENHED button to select your desired measurement units.
- Forbered sonden: Gently pull out the retractable probe to the desired length. Remove the sensor protective cover. The probe can be rotated and twisted 360 degrees for optimal positioning in various spaces.
Image: A user demonstrating the use of the AP-5000Y anemometer with its flexible, retractable probe extended and bent to measure airflow inside a ventilation duct.
- Placer sonden: Place the sensor end of the probe directly into the airflow or area you wish to measure. Ensure the sensor is fully exposed to the flow for accurate readings.
- Læs mål: Observe the real-time values on the LCD display. You can press the MAKS/MIN/GNS knap til view the maximum, minimum, or average readings during your measurement session.
- Data Hold: Tryk på SÆT knappen for at fryse den aktuelle aflæsning på displayet. Tryk igen for at slippe den.
- Sluk: After use, retract the probe and replace the sensor protective cover. Press the On/Off button to turn off the device. The anemometer also features an automatic power-off function to conserve battery.
4.3 LCD Display with Backlight
The LCD display provides clear readings of wind speed, airflow, temperature, and humidity. It is equipped with a backlight for enhanced visibility in various lighting conditions. To activate or deactivate the backlight, refer to the specific instructions in the full user manual if not controlled automatically.
Image: A comparison showing the AP-5000Y's LCD display in both a well-lit room and a dark environment, demonstrating the clarity provided by its backlight feature.
5. Vedligeholdelse
- Rensning: Wipe the device and probe with a soft, dry cloth. Do not use abrasive cleaners or solvents. The probe is waterproof and dustproof, but avoid submerging the main unit in liquids.
- Sensorpleje: Always replace the sensor protective cover when the probe is not in use to prevent damage to the delicate hot wire sensor.
- Batteripleje: Recharge the lithium-ion battery when the low battery indicator appears on the display. For long-term storage, ensure the battery is partially charged (around 50%) and store the device in a cool, dry place.
- Opbevaring: Store the anemometer in its canvas bag to protect it from dust and physical damage.
6. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke | Batteri ikke tilsluttet eller afladet | Ensure the internal battery is properly connected (refer to Setup section). Charge the device using the Type-C cable. |
| Unøjagtige aflæsninger | Incorrect probe placement, wrong unit selected, sensor obstruction | Ensure the probe's hot wire sensor is fully exposed to the airflow. Verify that the correct measurement mode and units are selected. Clean the sensor if necessary. |
| Skærmen er tom eller svag | Low battery, backlight off | Recharge the battery. Check if the backlight needs to be manually activated (refer to Operating Instructions). |
| Enheden oplader ikke | Cable issue, power source issue | Ensure the Type-C cable is securely connected. Try a different USB power adapter or port. |
7. Specifikationer
| Feature | Specifikation |
|---|---|
| Lufthastighedsområde | 0.1 ~ 30 m / s |
| Air Velocity Units | m/s, km/t, ft/min, knob, mph |
| Lufttemperaturområde | 0 ~ 45 ° C (32 ~ 113 ° F) |
| Luftmængdeområde | 0 ~ 999900 m³/min (CFM/CMM) |
| Sondestørrelse | 298.5 x 40.84 x 23.7 mm (retractable) |
| Batteri | 600 mAh Lithium-ion |
| Opladningsgrænseflade | Type-C |
| Dimensioner (hovedenhed) | 5.74 x 2.36 x 1.1 tommer |
| Vægt | 237 gram |
| Materiale | Plast |
| Vise | LCD med baggrundsbelysning |
| Særlige funktioner | Retractable 360° revolving probe, MAX/MIN/AVG, Data Hold, Auto Power-Off, Waterproof & Dustproof Probe |
8. Garanti og support
For specific warranty information regarding your AOPUTTRIVER AP-5000Y Hot Wire Anemometer, please refer to the documentation included with your purchase or contact the seller directly. Warranty terms may vary based on region and retailer.
Should you encounter any issues or require technical assistance, please contact AOPUTTRIVER customer support through their official website or the retailer from whom you purchased the product. Please have your model number (AP-5000Y) and purchase details ready when contacting support.