PERLESMITH PSAT3B Tilting TV Wall Mount Instruction Manual

Indledning

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your PERLESMITH PSAT3B Tilting TV Wall Mount. Please read this manual thoroughly before beginning installation and retain it for future reference. This wall mount is designed for televisions ranging from 42 to 100 inches and supports a maximum weight of 160 lbs.

Sikkerhedsoplysninger

ADVARSEL: Forkert installation kan resultere i alvorlig personskade og materielle skader. Hvis du ikke forstår disse instruktioner eller er i tvivl om installationens sikkerhed, bedes du kontakte en kvalificeret installatør.

• This product is intended for installation on wood studs (16"-24" spacing), solid concrete, or brick walls only. Do not install on drywall alone.
• Sørg for, at monteringsfladen sikkert kan bære den samlede vægt af beslaget og dit fjernsyn.
• Overskrid ikke den maksimale vægtkapacitet på 72.5 kg.
• Verify your TV's VESA pattern (mounting hole spacing) is compatible with the mount (200x200mm to 600x600mm).
• Brug altid en stolpesøger til at finde træstolper præcist.
• Brug passende sikkerhedsudstyr, herunder øjenbeskyttelse, under installationen.
• Hold børn og kæledyr væk fra arbejdsområdet under installationen.

The PERLESMITH PSAT3B Tilting TV Wall Mount provides a secure and flexible viewing solution for large televisions.

Pakkens indhold

Please check to ensure all components are present and undamaged before installation. Refer to the included hardware bags for specific screw sizes and quantities.

• Vægplademontering
• Tv-beslag (2)
• Monteringssæt (forskellige skruer, skiver, afstandsstykker, ankre)
• Niveau
• Instruktionsmanual

Overview of the PERLESMITH PSAT3B wall mount components and included hardware.

Specifikationer

This diagram illustrates the available VESA patterns and compatible wall types for the mount. Do not install on drywall alone.

Opsætning og installation

Follow these steps carefully to ensure a secure installation. It is recommended to have two people for TV mounting.

Trin 1: Kontrol før installation

• Bekræft vægtype: Ensure your wall is suitable for mounting (16"-24" wood studs, concrete, or brick).
• Check TV Size: Confirm your TV is between 42-100 inches.
• Verify VESA Pattern: Measure the horizontal and vertical distance between the mounting holes on the back of your TV. This must be between 200x200mm and 600x600mm.

Always perform these checks before beginning the installation process.

Trin 2: Fastgør beslagene til tv'ets bagside

1. Placer forsigtigt dit tv med forsiden nedad på en blød, ren overflade for at forhindre, at skærmen beskadiges.
2. Juster TV-beslagene med monteringshullerne på bagsiden af ​​dit TV.
3. Vælg de passende skruer, skiver og afstandsstykker fra hardwaresættet, der passer til dit tv's VESA-huller.
4. Securely fasten the brackets to the TV using a screwdriver, ensuring they are centered and tight. Do not overtighten.

Trin 3: Installer vægpladen

1. Determine the desired height for your TV. Use a pencil to mark the center of the desired location on the wall.
2. Use a stud finder to locate the center of two adjacent wood studs (for wood stud installation) or mark drill points for concrete/brick.
3. Hold the wall plate against the wall, aligning the center with your mark and ensuring it is level using the included bubble level. Mark the drill holes.
4. Drill pilot holes at the marked locations. For wood studs, drill 7/32" (5.5mm) holes. For concrete/brick, drill 3/8" (10mm) holes and insert concrete anchors.
5. Attach the wall plate to the wall using the lag bolts and washers. Tighten securely.

Step 4: Hang TV onto Wall Plate

1. Løft forsigtigt tv'et op med de medfølgende beslag med hjælp.
2. Hægt TV-beslagene fast på vægpladens øverste kant.
3. Sænk forsigtigt tv'et, indtil beslagene går helt i indgreb med vægpladen.
4. Engage the safety latches located at the bottom of the TV brackets to secure the TV to the wall plate. The magnetic pull tabs can be used to lock or release the TV.

Simplified three-step installation process for the PERLESMITH TV mount.

The mount extends 6.5 inches from the wall for easy cable access and retracts to 3 inches for a low-profile se.

Betjeningsvejledning

Vippejustering

The PERLESMITH PSAT3B mount allows for a tilt range of +5° to -15°. To adjust the tilt, loosen the tilt knobs on the side of the TV brackets, adjust the TV to your desired angle, and then tighten the knobs securely. This helps reduce glare and optimize viewing vinkler.

Justering af drejning

The mount offers a ±5° swivel adjustment. This feature allows for minor horizontal adjustments to achieve a perfectly level screen after installation. Simply grasp the sides of the TV and gently rotate it to the desired position.

Justering af nivellering

After installation, you can fine-tune your TV's alignment with a ±2° leveling adjustment. This ensures your TV is perfectly horizontal, even if the wall plate was not installed perfectly level.

The mount offers a ±5° swivel for optimal viewfleksibilitet.

Achieve a perfectly level TV with the ±2° leveling adjustment feature.

The secure latch system with magnetic pull tabs allows for quick and tool-free locking and unlocking of the TV.

Opretholdelse

Regelmæssig vedligeholdelse sikrer levetiden og sikker drift af dit TV-vægbeslag.

• Rensning: Tør holderen af ​​med en blød, tør klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Periodiske kontroller: Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de forbliver stramme. Efterspænd om nødvendigt.
• Undersøg for skader: Undersøg regelmæssigt monteringen for tegn på slid, skader eller korrosion. Hvis der findes problemer, skal brugen ophøre og kundesupport kontaktes.

Fejlfinding

Hvis du støder på problemer under eller efter installationen, kan du bruge følgende almindelige løsninger.

• TV'et er ikke i vater: Use the ±2° leveling adjustment feature to fine-tune the TV's horizontal position. Ensure the wall plate was installed as level as possible.
• Vanskeligheder med at vippe: Ensure the tilt knobs on the TV brackets are sufficiently loosened before attempting to adjust the tilt. Tighten them firmly after adjustment.
• TV'et føles løst: Double-check that all mounting bolts to the wall and screws to the TV are securely tightened. Ensure the safety latches are engaged.
• Mounting Holes Don't Align: Verify your TV's VESA pattern against the mount's specifications. If incompatible, the mount cannot be used.
• Manglende dele: If any parts are missing from the package, contact PERLESMITH customer support immediately.

Garanti og support

This PERLESMITH product comes with a 5-year warranty. For warranty claims or technical assistance, please contact PERLESMITH customer support. You can typically find contact information on the product packaging or the official PERLESMITH webwebsted.

For additional support, you may visit the PERLESMITH store on Amazon: PERLESMITH Store