EPOMAKER AJAZZ AK820 V2 Tri-Mode Mechanical Gaming Keyboard User Manual

Indledning

This manual provides detailed instructions for the setup, operation, and maintenance of your EPOMAKER AJAZZ AK820 V2 Tri-Mode Mechanical Gaming Keyboard. Please read this guide thoroughly before using the product to ensure optimal performance and longevity.

Hvad er der i æsken

• EPOMAKER AJAZZ AK820 V2 Mechanical Gaming Keyboard
• USB kabel
• Keycap aftrækker
• Two Mechanical Switches (spare)
• Brugervejledning (dette dokument)

Opsætning

1. Opladning af tastaturet

Before initial use, fully charge the keyboard using the provided USB-C cable. Connect the USB-C end to the keyboard's port and the USB-A end to a power source (e.g., computer USB port, wall adapter).

The keyboard features a 10000mAh battery. Charging status may be indicated by the backlight or a dedicated LED.

Image: The keyboard connected via USB-C cable, demonstrating the charging setup.

2. Forbindelsestilstande

The AK820 V2 supports three connectivity modes: 2.4GHz wireless, Bluetooth, and USB-C wired. A switch on the underside of the keyboard allows selection between these modes.

Image: Diagram illustrating the three connectivity modes: USB-C, 2.4GHz, and Bluetooth.

2.1. USB-C kablet tilstand

Connect the keyboard directly to your computer using the provided USB-C cable. This mode offers a stable connection and charges the keyboard simultaneously. The polling rate in wired mode is 1000Hz.

2.2. 2.4 GHz trådløs tilstand

Insert the 2.4GHz USB dongle into an available USB port on your computer. Switch the keyboard to 2.4GHz mode. The keyboard should automatically connect. This mode provides a 1000Hz polling rate for low-latency gaming.

2.3. Trådløs Bluetooth-tilstand

Switch the keyboard to Bluetooth mode. On your device (PC, laptop, tablet, phone), search for Bluetooth devices and select "AK820 V2" to pair. The keyboard supports Bluetooth 5.0 and has a polling rate of 125Hz. It can remember up to 5 paired devices.

Image: The keyboard shown connected wirelessly to a laptop, tablet, and smartphone, demonstrating wide compatibility.

3. Ergonomic Adjustment

Tastaturet har to stage adjustable kickstand on the underside, allowing you to set the typing angle for personalized comfort and to reduce hand fatigue during extended use.

Image: Close-up of the keyboard's underside, highlighting the two-stage adjustable kickstand.

Betjeningsvejledning

1. Drejeknapfunktionalitet

The large rotary metal knob provides quick control over audio and other functions:

• Drej knappen: Adjusts volume (clockwise for volume up, counter-clockwise for volume down).
• Tryk på knappen: Slår lyden til eller fra.
• Fn + Knob Click: Enters menu mode for adjusting lighting, language, and other settings (if applicable via software).

Image: The keyboard's rotary knob with visual cues for volume adjustment and mute/unmute functions.

2. Dynamic RGB Backlight Control

The AK820 V2 features 16 million color RGB backlighting with south-facing LEDs for vibrant illumination. You can customize lighting effects using keyboard shortcuts or the dedicated software.

• Fn + Arrow Keys (Up/Down): Adjusts backlight brightness/speed.
• Fn + Piletaster (venstre/højre): Changes backlight effect direction.
• Fn + \|: Cycles through different backlight effects.
• Fn + Enter: Cycles through side light effects.

Image: The keyboard illuminated with dynamic RGB backlighting, showcasing both key and side panel lights.

3. Programmerbar software

Utilize the dedicated software for advanced customization, including:

• Nøgleomlægning
• Makrooptagelse
• Layer Definition
• Detailed Backlight Settings
• Systemindstillinger

Se den officielle EPOMAKER website for software download and specific instructions.

Image: A computer display showing the graphical user interface of the keyboard's programmable software.

4. Battery Life Check (Wireless Mode Only)

To check the remaining battery life in wireless mode, press Fn + Backspace. The keyboard's lighting or a dedicated indicator will show the current battery level.

Image: Visual representation of battery life: 21 hours with backlight, 214 hours without backlight, and the Fn + Backspace key combination for checking battery status.

Opretholdelse

1. Keycap and Switch Replacement (Hot-Swappable)

The AK820 V2 features a hot-swappable PCB, allowing you to change mechanical switches without soldering. It is compatible with 3-pin and 5-pin mechanical switches.

• Fjernelse af tastehætter: Use the provided keycap puller to gently remove keycaps. Hook the puller onto the keycap and pull upwards evenly.
• Fjernelse af kontakter: After removing the keycap, use the switch puller (often integrated with the keycap puller) to grip the top and bottom clips of the switch. Gently pull the switch upwards until it detaches from the PCB.
• Installation af afbrydere: Juster stifterne på den nye kontakt med hullerne på printkortet. Tryk godt ned, indtil kontakten klikker på plads. Sørg for, at stifterne ikke er bøjede.
• Installation af tastehætter: Place the keycap onto the switch stem and press down gently until it is secure.

Image: A keycap and switch being removed from the keyboard, demonstrating the hot-swappable design.

Image: Detailed specifications of the Coconut Cream switch, including trigger force, bottom-out force, pre-travel, and total travel.

2. Rensning

To clean your keyboard, first disconnect it from all power sources. Use a soft, lint-free cloth to wipe the surface. For deeper cleaning, remove keycaps and use compressed air to clear debris from between switches. Avoid using harsh chemicals or abrasive materials.

Fejlfinding

• Tastaturet reagerer ikke:
  • Sørg for, at tastaturet er opladet.
  • Check the connectivity mode switch (USB-C, 2.4GHz, BT) and ensure it matches your connection method.
  • For 2.4GHz, ensure the USB dongle is properly inserted.
  • For Bluetooth skal du sørge for, at tastaturet er parret og valgt på din enhed. Prøv at parre igen.
  • Prøv at tilslutte via USB-C-kabel for at udelukke problemer med den trådløse forbindelse.
• Nøgler registreres ikke:
  • Ensure the switches are fully seated in the PCB.
  • If a specific key is not working, try replacing its switch with one of the spare switches or a known working switch from another key.
  • Rengør eventuelt snavs omkring den berørte kontakt.
• Problemer med baggrundsbelysning:
  • Adjust brightness using Fn + Arrow Up.
  • Cycle through effects using Fn + \|.
  • Sørg for, at tastaturet ikke er i lavstrømstilstand.
  • Check software settings for backlight configuration.
• Software registrerer ikke tastaturet:
  • Ensure the keyboard is connected via USB-C wired mode when using the software.
  • Download the latest version of the software from the official EPOMAKER webwebsted.
  • Deaktiver midlertidigt al antivirus- eller firewallsoftware, der kan forstyrre.

Specifikationer

Image: The keyboard with an overlay detailing its technical specifications, including dimensions, weight, and keycap type.

Garantioplysninger

The EPOMAKER AJAZZ AK820 V2 Mechanical Gaming Keyboard comes with a 1-års garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl og funktionsfejl ved normal brug. Den dækker ikke skader forårsaget af misbrug, ulykker, uautoriserede ændringer eller normal slitage.

For warranty claims, please retain your proof of purchase and contact EPOMAKER customer support.

Støtte

For further assistance, technical support, or to download the latest software and drivers, please visit the official EPOMAKER webwebsted:

www.epomaker.com

You may also contact EPOMAKER customer service directly through their webhjemmeside for specifikke forespørgsler.