Hyzom WiFi Extender/Repeater Instruction Manual

1. Introduktion

This manual provides detailed instructions for setting up, operating, and maintaining your Hyzom WiFi Extender/Repeater. This device is designed to extend the range of your existing wireless network, eliminating dead zones and improving signal strength throughout your home or office. Please read this manual carefully before using the product to ensure proper installation and optimal performance.

2. Sikkerhedsoplysninger

• Keep the device away from water, fire, high humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If service is required, contact customer support.
• Brug kun den medfølgende eller anbefalede strømadapter fra producenten.
• Sørg for korrekt ventilation omkring enheden for at forhindre overophedning.
• Opbevares utilgængeligt for børn.

3. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• Hyzom WiFi Extender/Repeater Unit
• Netværkskabel
• Instruktionsmanual (dette dokument)

4. Produktet er slutview

Familiarize yourself with the components of your Hyzom WiFi Extender/Repeater.

Figur 4.1: Forside og side view of the Hyzom WiFi Extender, showing LED indicators, WPS button, and Ethernet ports.

• LED-indikatorer: Display the status of power, WiFi signal, and WPS connection.
• WPS knap: Used for quick setup with WPS-enabled routers.
• Nulstil knap: Restores the device to factory default settings (use a pin to press and hold for 5-8 seconds).
• Ethernet-porte: For wired connections to devices like PCs or gaming consoles.
• Strømport: Tilsluttes strømadapteren.

5. Opsætningsvejledning

There are two primary methods to set up your Hyzom WiFi Extender: using the WPS button or via a web browser.

5.1. WPS Setup (Recommended for quick setup)

1. Tænd: Plug the Hyzom WiFi Extender into an electrical outlet near your main router. Wait for the Power LED to turn solid.
2. Tryk på WPS på routeren: Inden for to minutter skal du trykke på WPS-knappen på din primære WiFi-router. Se din routers manual for den nøjagtige placering af WPS-knappen.
3. Tryk på WPS på extenderen: Immediately after pressing the WPS button on your router, press the WPS button on the Hyzom WiFi Extender.
4. Vent på forbindelse: The WiFi Extender's signal LED should blink and then turn solid, indicating a successful connection. This process may take a few moments.
5. Flyt forlænger: Once connected, unplug the extender and move it to a location halfway between your router and the WiFi dead zone. Ensure the signal LED remains solid or strong after relocation.

Figur 5.1: Visual guide for WPS one-touch connection, illustrating pressing the WPS button on both the router and the extender.

5.2. Browser-Based Setup

1. Tænd: Plug the Hyzom WiFi Extender into an electrical outlet near your main router. Wait for the Power LED to turn solid.
2. Opret forbindelse til extenderens netværk: On your computer or mobile device, connect to the WiFi network broadcast by the extender (e.g., "Hyzom_Extender" or similar, without a password).
3. Adgangsopsætningsside: Åbn a web browser and enter the default IP address or domain name (usually found on a sticker on the device or in a quick start guide) into the address bar. Follow the on-screen instructions to log in (default username/password is often "admin").
4. Select Router Network: The extender will scan for available WiFi networks. Select your main router's network from the list.
5. Indtast adgangskode: Enter the WiFi password for your main router's network.
6. Konfigurer Extender-netværk: You may be prompted to create a new network name (SSID) for the extended network or use the same as your main router. It is recommended to use a different name (e.g., "YourNetworkName_EXT") to easily identify the extended network.
7. Komplet opsætning: Follow any remaining prompts to complete the setup. The extender will restart.
8. Flyt forlænger: Once configured, unplug the extender and move it to a location halfway between your router and the WiFi dead zone. Ensure the signal LED indicates a strong connection after relocation.

6. Operating the WiFi Extender

After successful setup, the Hyzom WiFi Extender will automatically extend your wireless network. Devices within the extended range can connect to the new network name (SSID) you configured during setup.

• Optimal placering: For best performance, place the extender in a location where it receives a good signal from your main router and can effectively broadcast to the desired dead zones. Avoid placing it near large metal objects, microwaves, or other sources of interference.
• Tilslutning af enheder: Connect your wireless devices (smartphones, tablets, laptops, smart TVs, gaming consoles) to the extended WiFi network using the password you set during configuration.
• Kablede forbindelser: Use the Ethernet ports on the extender to connect wired devices for a stable internet connection.

Figur 6.1: Illustration of the Hyzom WiFi Extender expanding network coverage throughout a multi-story home, eliminating dead zones.

Figur 6.2: The Hyzom WiFi Extender supports connection for over 65 devices, including smartphones, notebooks, IP cameras, speakers, tablets, and gaming consoles.

7. Vedligeholdelse

• Rensning: Brug en blød, tør klud til at rengøre enheden. Brug ikke flydende rengøringsmidler eller rengøringsmidler på aerosol.
• Firmwareopdateringer: Kontroller jævnligt producentens webwebsted for firmwareopdateringer for at sikre optimal ydeevne og sikkerhed.
• Genstart: Hvis du oplever netværksproblemer, kan du prøve at genstarte extenderen ved at tage stikket ud af stikkontakten i 10 sekunder og derefter sætte den i igen.

8. Fejlfinding

Q: The extender is not powering on.

A: Ensure the power adapter is securely plugged into both the extender and a working electrical outlet. Try a different outlet.

Q: I cannot connect to the extended network.

A: Verify that the extender is properly set up and connected to your main router (check the signal LED). Ensure you are connecting to the correct extended network name (SSID) and using the correct password. Try restarting both your router and the extender.

Q: The signal is weak or unstable after setup.

A: Relocate the extender to a position that is halfway between your router and the desired coverage area. Ensure there are no major obstructions (thick walls, metal objects) between the router, extender, and your devices. Adjust the extender's antennas for optimal signal direction.

Figur 8.1: The Hyzom WiFi Extender features four high-performance, adjustable antennas for customized signal direction and improved penetration through walls.

Q: WPS setup failed.

A: Ensure your router supports WPS and that you are pressing the WPS buttons on both devices within the specified timeframe. If WPS continues to fail, try the browser-based setup method.

Q: I forgot the login password for the extender's web ledelsesside.

A: You can reset the extender to factory default settings by pressing and holding the Reset button for 5-8 seconds with a pin. After resetting, you will need to reconfigure the extender.

9. Specifikationer

10. Garantioplysninger

The Hyzom WiFi Extender/Repeater comes with a 4 måneders garanti from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or external factors.

Gem venligst dit købsbevis for garantikrav.

11. Kundesupport

If you encounter any issues or have questions regarding your Hyzom WiFi Extender/Repeater that are not addressed in this manual, please contact our customer support team.

For the most up-to-date support information, including FAQs and contact details, please visit the official Hyzom webwebstedet eller se din produktemballage.

Du kan også besøge Hyzom Store on Amazon for yderligere produktinformation og supportressourcer.