FiiO EH11 Retro On-Ear Bluetooth Headphones User Manual

Indledning

Welcome to your FiiO EH11 Retro On-Ear Bluetooth Headphones. This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your device. Please read this guide thoroughly to ensure optimal performance and longevity of your headphones.

Image: FiiO EH11 Bluetooth Over-Ear Headphones, showcasinproduktdesignet.

Hvad er der i æsken

Upon unpacking your FiiO EH11 headphones, please verify that all the following items are included:

• Two pairs of foam earpads (one pre-installed, one spare)
• One USB-A to Type-C charging cable
• En hurtig startguide

Produkt overview og funktioner

The FiiO EH11 headphones combine retro aesthetics with modern audio technology, offering a unique listening experience.

Advanced Acoustic Engineering

Equipped with a custom low-frequency enhanced design, a 40mm long-stroke dynamic driver, and a high-damping composite diaphragm. The resonance frequency is reduced to 60Hz, with bass extension down to 17Hz for deep, impactful low-end performance. The semi-open back design balances sound openness with listening privacy.

Billede: Detaljeret view of the 40mm dynamic driver components and a frequency response graph illustrating bass extension.

LDAC High-Resolution Bluetooth Audio

Supports LDAC high-resolution Bluetooth codec with transmission rates up to 990kbps, approximately three times higher than standard SBC/AAC, delivering near-lossless wireless audio quality. To utilize this feature, your source device must support LDAC output. Using LDAC may result in marginally higher power draw. The format is enabled by default but can be deactivated via the FiiO Control App.

Image: Diagram illustrating LDAC high-resolution Bluetooth support and comparison of transmission rates with traditional codecs.

Let og behageligt design

Weighing only about 92g with a low clamping force of just 1.7N, the EH11 ensures fatigue-free long listening sessions. Enjoy music with cloud-like comfort.

Image: FiiO EH11 headphones highlighting their lightweight design at approximately 92 grams.

Langvarig batterilevetid

A 1.5-hour charge provides up to 30 hours of playback, ideal for daily use and extended listening sessions.

Image: Visual representation of 2 hours charging time for 30 hours of battery life.

Customizable Sound Effects via FiiO Control App

Download the dedicated FiiO Control App to unlock multiple EQ presets such as Pop and Rock. A specially tuned gaming mode enhances footsteps and gunshot details, combined with a built-in HD microphone for accurate sound positioning and efficient team communication.

Image: Screenshot of the FiiO Control App interface showing options for custom audio profiles og EQ-indstillinger.

Dual-Device Bluetooth Connection

Supports simultaneous connection to two devices (such as a phone and a computer), allowing seamless switching between music, calls, gaming, and video without re-pairing.

Image: FiiO EH11 headphones shown connected to both a smartphone and a tablet, illustrating dual-device connectivity.

Udskiftelige ørepuder

Detachable foam ear pads make cleaning and replacement easy. Two pairs of different-colored official ear pads are included, with more color options available to express personal style and individuality.

Image: Close-up of the FiiO EH11 ear pads, demonstrating their detachability for easy cleaning and replacement.

Opsætning

Opladning af hovedtelefoner

Before first use, fully charge your FiiO EH11 headphones. Connect the provided USB-A to Type-C charging cable to the charging port on the headphones and a compatible USB power source. A full charge takes approximately 1.5 hours and provides up to 30 hours of playback time.

Bluetooth-parring

1. Indledende parring: When the headphones are powered off, press and hold the power button for 5 seconds until the indicator light flashes to enter a new pairing state.
2. Re-entering Pairing Mode: If the headphones are already powered on, press and hold the power button for 2 seconds to re-enter pairing mode.
3. Tilslut enhed: On your device (smartphone, computer, etc.), enable Bluetooth and select "FiiO EH11" from the list of available devices.
4. Clear Paired Devices: To clear all previously paired devices, ensure the headphones are powered off, then press and hold the power button for 10 seconds.

The FiiO EH11 supports dual-device connection, allowing you to connect to two devices simultaneously and switch between them seamlessly.

Betjeningsvejledning

Controls and Indicator Status Guide

Image: Diagram detailing button and knob controls, along with RGB indicator light statuses.

Knap kontrol

• Tænd: Tryk og hold knappen nede i 2 sekunder.
• Sluk: Tryk og hold knappen nede i 5 sekunder.
• Besvar opkald: Enkelt tryk.
• Afslut opkald: Tryk og hold i 2 sekunder.
• Afvis opkald: Tryk og hold i 2 sekunder.
• Afspil/sæt musik på pause: Enkelt tryk.
• Aktiver stemmeassistent: Double click button.

Knop kontrol

• Venstre knap: Rotate counter-clockwise for previous track, clockwise for next track.
• Højre knap: Drej med uret for at øge lydstyrken, mod uret for at sænke lydstyrken.

RGB Indicator Status

• Parring: Red and blue flashing.
• Fuldt opladet: Solid blå.
• Tænd/sluk: White flashing.
• Lavt batteri: Rød blinkende.
• Opladning: Fast rød.

FiiO-kontrolapp

Download the FiiO Control App from your device's app store to access advanced features, including:

• Multiple EQ presets (Pop, Rock, Jazz, Classical, etc.)
• Tilpasset lydprofiles
• Activation of Gaming Mode for enhanced audio cues
• LDAC format activation/deactivation

Spiltilstand

The specially tuned gaming mode enhances specific audio details like footsteps and gunshots for an immersive gaming experience. This mode needs to be enabled and switched within the FiiO Control App.

Image: FiiO EH11 headphones in a gaming scenario, illustrating the enhanced sound effects.

Opretholdelse

Cleaning and Replacing Ear Pads

The foam ear pads of your FiiO EH11 headphones are detachable for easy cleaning and replacement. Gently pull the ear pads off the earcups to remove them. Clean with a soft, dry cloth. To reattach or replace, align the ear pad with the earcup and press firmly until it is securely in place. Ensure the ear pads are fully dry before reattaching.

Fejlfinding

If you encounter any issues with your FiiO EH11 headphones, please refer to the following common solutions:

• Ingen strøm: Ensure the headphones are fully charged. Connect to a power source using the provided USB-C cable.
• Kan ikke parres: Make sure the headphones are in pairing mode (indicator flashing red and blue or white). Ensure Bluetooth is enabled on your device and it is within range. Try clearing all paired devices on the headphones and re-pairing.
• Ingen lyd: Check the volume levels on both the headphones and your connected device. Ensure the headphones are correctly paired and connected.
• Dårlig lydkvalitet: Ensure there are no obstructions between the headphones and your device. If using LDAC, confirm your source device supports it and try switching to a different codec via the FiiO Control App if issues persist.
• Kontrolelementer reagerer ikke: Try restarting the headphones. If the issue persists, ensure the FiiO Control App is updated and functioning correctly.

Specifikationer

Garanti og support

Your FiiO EH11 Retro On-Ear Bluetooth Headphones come with a 1 års producentgaranti. For warranty claims or technical support, please contact FiiO customer service.

Additionally, products purchased through Amazon are subject to a 30 dages returret. Please refer to Amazon's return policy for details.

For further information and resources, you may visit the FiiO-butik på Amazon.

Produktvideo overståetview