EUHOMY IM046-S

EUHOMY IM046-S 2-Inch Ice Ball Maker Instruction Manual

Model: IM046-S

1. Vigtige sikkerhedsoplysninger

Please read all instructions carefully before operating the appliance. Retain this manual for future reference. Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury.

  • Sørg for, at apparatet er tilsluttet en korrekt jordet stikkontakt.
  • Nedsænk ikke netledningen, stikket eller apparatet i vand eller andre væsker.
  • Tag stikket ud af stikkontakten før rengøring, eller når den ikke er i brug.
  • Brug ikke apparatet med en beskadiget ledning eller stik.
  • Hold apparatet væk fra varmekilder og direkte sollys.
  • Dette apparat er kun til husholdningsbrug.

2. Produktet er slutview

The EUHOMY IM046-S is a countertop ice ball maker designed to produce crystal-clear, slow-melting 2-inch ice spheres. It features a self-cleaning function and offers both manual and automatic water refill options.

EUHOMY IM046-S Ice Ball Maker on a countertop with drinks

Billede 2.1: Forside view of the EUHOMY IM046-S Ice Ball Maker, showcasing its compact design and the ice spheres inside.

3. Opsætning

3.1 Udpakning

  • Tag forsigtigt ismaskinen ud af emballagen.
  • Check that all included components are present: Ice Maker Machine, Inlet Pipe, Instruction Manual, Ice Clamp.
  • Remove any protective film or tape from the appliance.

3.2 Placering

Place the ice maker on a stable, level surface away from direct sunlight and heat sources. Ensure there is adequate ventilation around the unit. The product dimensions are 17.6"D x 12.6"W x 17.9"H.

Diagram showing the dimensions of the EUHOMY IM046-S Ice Ball Maker

Image 3.1: Product dimensions (Length: 12.6 in, Width: 17.6 in, Height: 17.9 in) and key specifications.

3.3 Vandpåfyldning

The ice maker offers two methods for adding water:

  • Manual Fill: Open the water inlet cover and pour clean drinking water directly into the reservoir.
  • Auto Refill: Connect the provided inlet pipe to a water line for continuous water supply.
Diagram illustrating manual and auto water refill methods for the ice maker

Image 3.2: Illustration of the two water filling methods: manual pour and automatic water line connection.

3.4 Indledende rengøring

Before first use, perform a self-cleaning cycle. Refer to the 'Maintenance' section for detailed instructions on using the self-cleaning function.

4. Betjeningsvejledning

4.1 Kontrolpanel

The ice maker features an intuitive touch control panel. Familiarize yourself with the buttons and indicators:

  • Power knap: Tænder eller slukker for apparatet.
  • Rens knap: Starter selvrensningscyklussen.
  • Vand Shortage advarsel: Indicates when the water reservoir needs refilling.
  • Door Alert: Indicates if the door is not properly closed.
  • Ice Making Progress Bar: Viser de aktuelle stage of the ice production cycle.
  • Breathing Indicator Light: Provides visual feedback on the machine's status.
Close-up of the ice maker's touch control panel with labeled indicators

Billede 4.1: Detaljeret view of the easy touch controls and indicators on the ice maker's display panel.

4.2 Fremstilling af is

  1. Sørg for, at vandbeholderen er fyldt.
  2. Tryk på Power knap (right side) to turn on the machine.
  3. The ice maker will automatically begin the ice production cycle. Four 2-inch ice balls are typically ready in approximately 40 minutes.
  4. The machine will continue to produce ice until the ice storage capacity is reached or the water level is low.

Video 4.1: This video demonstrates the ice making process, showing the machine producing four ice balls in approximately 40 minutes.

4.3 Ice Storage

The ice maker has a storage capacity of approximately 30-40 ice balls. The machine is designed to keep ice cold longer through adaptive cooling and high-density PU foam insulation, but it is not a freezer. For long-term storage, transfer ice balls to a freezer.

People enjoying drinks with ice balls, illustrating the large ice storage capacity

Image 4.2: The ice maker's large storage capacity, ideal for continuous ice supply.

Diagram showing the insulated front window, adaptive cooling sensor, and high-density PU foam for ice retention

Image 4.3: Internal components demonstrating how the ice maker keeps ice cold longer, including insulation and cooling sensor.

4.4 Water Quality for Clear Ice

The clarity of the ice balls can be influenced by the quality of the water used. For best results and crystal-clear ice, distilled water is recommended. Filtered water also produces good results, while tap water may result in cloudier ice with more bubbles.

Comparison of ice clarity based on water type: tap, filtered, mineral, and distilled water

Image 4.4: Visual guide to ice clarity based on the Total Dissolved Solids (TDS) level in water, recommending distilled water for optimal results.

Comparison of 2-inch ice balls melting slower than regular ice cubes over 30 minutes

Image 4.5: Illustration demonstrating how the 2-inch clear ice spheres melt slower than standard ice cubes, preserving drink flavor.

5. Vedligeholdelse

5.1 Selvrensende funktion

The ice maker is equipped with an automatic deep cleaning system:

  1. Sørg for, at vandbeholderen er fyldt med rent vand.
  2. Tryk og hold på Rens knap (left side) for 5 seconds to initiate the thorough cleaning cycle.
  3. The machine will perform a cleaning process, circulating water to remove impurities.
  4. Once the cleaning cycle is complete, drain the water as described in section 5.2.
Indre view of the ice maker during a self-cleaning cycle, showing water circulation

Image 5.1: The self-cleaning feature in action, ensuring hygienic ice production without manual scrubbing.

5.2 Aftapning af vand

To drain water from the appliance:

  1. Locate the front-edge drain port at the bottom of the unit.
  2. Place a container under the drain port.
  3. Fjern aftapningsproppen, så vandet kan løbe ud.
  4. Når den er tømt, skal du sætte drænproppen sikkert på igen.
Nærbillede view of the front-edge drain port on the ice maker

Image 5.2: The convenient front-edge drain port for easy water removal without lifting the machine.

5.3 Generel rengøring

Regularly wipe the exterior of the appliance with a soft, damp cloth. For the interior, in addition to the self-cleaning function, periodically wipe down surfaces with a mild detergent solution and rinse thoroughly. Ensure the appliance is unplugged before any manual cleaning.

6. Fejlfinding

If you encounter issues with your EUHOMY IM046-S ice ball maker, refer to the following common problems and solutions:

ProblemMulig årsagLøsning
Maskinen tænder ikkeIngen strømforsyningKontroller netledningens tilslutning og stikkontakten.
Ingen isproduktionLow water level; Door not closed; Ambient temperature too highRefill water reservoir; Ensure door is securely closed; Operate in a cooler environment.
Ice balls are cloudyDårlig vandkvalitetUse filtered or distilled water for clearer ice.
Vand Shortage Alert is onVandbeholderen er tomRefill the water reservoir manually or check auto-refill connection.
Door Alert is onDøren er ikke ordentligt lukketClose the door firmly until the alert disappears.

Hvis problemet fortsætter efter at have forsøgt disse løsninger, bedes du kontakte kundesupport.

7. Specifikationer

FeatureDetalje
MærkeEUHOMY
ModelnavnIM046-S
Produktdimensioner17.6" D x 12.6" B x 17.9" H
Kapacitet22 Pounds (Ice Production per Day)
Wattage150 watt
Voltage120 volt
Ice Ball Size2 tommer (50 mm)
Ice Making Speed4 balls per 40 minutes
Daglig isproduktionUp to 144 balls per day
Isopbevaringskapacitet30-40 balls
Nettovægt40.23 lbs / 18.25 kg
KølemiddelR290a
Inkluderede komponenterIce Maker Machine, Inlet Pipe, Instruction Manual, Ice Clamp

8. Garanti og support

This EUHOMY ice ball maker comes with a 1 års fabriksgaranti. For warranty claims, technical support, or any questions regarding the operation or maintenance of your appliance, please contact EUHOMY customer service. Refer to the contact information provided in the packaging or on the official EUHOMY webwebsted.

© 2026 EUHOMY. Alle rettigheder forbeholdes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.