Soundstream MPQ-6BX 1/2 DIN 5-Band Car Audio Equalizer User Manual

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of the Soundstream MPQ-6BX 1/2 DIN 5-Band Car Audio Equalizer with Digital Bass Reconstruction. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage.

Sikkerhedsoplysninger

• Strømforsyning: Ensure the unit is connected to a 12V DC negative ground power supply.
• Ledningsføring: All wiring should be performed with the vehicle's ignition turned off to prevent electrical shorts.
• Montering: Mount the unit securely to prevent movement during vehicle operation. Avoid mounting in locations exposed to direct sunlight, excessive heat, or moisture.
• Ventilation: Sørg for tilstrækkelig ventilation omkring enheden for at forhindre overophedning.
• Professionel installation: Hvis du er usikker på installationstrinnene, skal du kontakte en kvalificeret bilstereo-professionel.

Produkt overview

The Soundstream MPQ-6BX is a compact 1/2 DIN 5-band equalizer designed to enhance your car audio system. It features digital bass reconstruction, a selectable subsonic filter, and flexible input/output options for comprehensive sound control.

Nøglefunktioner:

• 5-bånds equalisering: Provides ±18 dB adjustment at 50 Hz, 200 Hz, 1 kHz, 5 kHz, and 20 kHz for precise frequency tuning.
• Digital basrekonstruktion: Restores low frequencies often lost during audio compression, enhancing bass impact.
• Subsonisk filter: Selectable 35–80Hz filter protects subwoofers from unwanted ultra-low frequencies.
• Alsidige indgange: Includes AUX, low-level RCA, and high-level speaker inputs for compatibility with various head units.
• High Output Preamplivligere: Delivers 7V RMS / 12V peak preamplifier outputs with ultra-low 0.01% Total Harmonic Distortion (THD) and a 110 dB Signal-to-Noise Ratio (SNR).
• Kompakt design: 1/2 DIN size (7" W x 5.1" D x 1.2" H) for easy installation in tight spaces.

Figur 1: Vinklet view of the Soundstream MPQ-6BX equalizer.

Opsætning og installation

Proper installation is crucial for optimal performance. Refer to the wiring diagram and follow these steps carefully.

Pakkeindhold:

Figure 2: Included components: MPQ-6BX equalizer, remote knob, and installation accessories.

• Soundstream MPQ-6BX Equalizer
• Fjernbetjent basknap
• Installation Accessories (wiring harness, mounting hardware)
• Brugermanual

Montering:

1. Choose a suitable location in your vehicle, such as a 1/2 DIN dash opening or under the dashboard, ensuring it is away from heat sources and moisture.
2. Ensure there is enough space for wiring connections and ventilation.
3. Fastgør enheden med det medfølgende monteringsudstyr.

Ledningsforbindelser:

Figure 3: Rear panel connections for power, inputs, and outputs.

1. Strømtilslutning:
   • Tilslut +12V wire to a constant 12V power source (e.g., battery positive terminal) with an inline fuse.
   • Tilslut GND wire to a clean chassis ground point.
   • Tilslut REM (Remote) wire to the remote turn-on output of your head unit.
2. Indgangsforbindelser:
   • AUX-indgang: For external audio devices via RCA.
   • RCA-indgang på lavt niveau: Connect to the RCA pre-out of your head unit.
   • High-Level Speaker Input: Use for head units without RCA outputs. Connect directly to speaker wires.
3. Udgangsforbindelser:
   • Tilslut FRONT, BAG, og SUB RCA outputs to the corresponding inputs on your amplivførere.

Betjeningsvejledning

Familiarize yourself with the controls to optimize your audio experience.

Figure 4: Front panel controls of the MPQ-6BX equalizer.

Kontrol på frontpanelet:

• Hovedvolumen: Justerer equalizerens samlede udgangsniveau.
• Indgangsvalg: Switches between CD (Low-Level RCA/High-Level) and AUX inputs.
• Fader (F/R): Balances the audio output between front and rear channels.
• Level (Digital Bass Processor): Adjusts the intensity of the digital bass reconstruction.
• Subsonic (35Hz/80Hz): Selects the cutoff frequency for the subsonic filter.
• EQ Bands (50Hz, 200Hz, 1kHz, 5kHz, 20kHz): Adjusts the gain (±18dB) for each frequency band.

Rear Panel Settings:

Figur 5: Øverst view showing input level, ground isolation, and output voltage skifter.

• Input Level (90Hz/150Hz/200Hz): Adjusts the input sensitivity for the digital bass processor. Experiment to find the best setting for your source.
• Ground Isolation (200Ω/GND/ISO): Helps eliminate ground loop noise. Try different settings if you experience hum or hiss.
• Udgang Voltage (5V/7.5V/10V): Sets the maximum output voltage af den præamplifier. Match this to the input sensitivity of your amplivførere.

Opretholdelse

The Soundstream MPQ-6BX is designed for reliable operation with minimal maintenance.

• Rensning: Brug en blød, tør klud til at rengøre enheden. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Forbindelser: Kontrollér regelmæssigt alle ledningsforbindelser for at sikre, at de er fastgjorte og fri for korrosion.
• Miljø: Ensure the unit remains in a well-ventilated area, free from excessive heat, dust, and moisture.

Fejlfinding

Specifikationer

Garanti og support

For garantioplysninger og teknisk support henvises til garantikortet, der følger med dit produkt, eller besøg den officielle Soundstream-side. webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.

Soundstream Officiel Webwebsted: www.soundstream.com