tectake 406270

tectake Electric Wall Fireplace 91.5 x 43 x 12 cm Instruction Manual

Model: 406270

1. Introduktion

Thank you for choosing the tectake Electric Wall Fireplace. This manual provides essential information for the safe and efficient operation of your new appliance. Please read these instructions carefully before installation and use, and retain them for future reference.

2. Sikkerhedsinstruktioner

ADVARSEL: For at mindske risikoen for brand, elektrisk stød eller personskade skal du overholde følgende:

  • Læs alle instruktioner, før du bruger denne varmeovn.
  • Denne varmeovn er varm under brug. For at undgå forbrændinger må bar hud ikke berøre varme overflader. Hold brændbare materialer, såsom møbler, puder, sengetøj, papir, tøj og gardiner, mindst 1 meter fra varmeovnens forside, og hold dem væk fra siderne og bagsiden.
  • Ekstrem forsigtighed er nødvendig, når et varmeapparat bruges af eller i nærheden af ​​børn eller handicappede, og når varmeapparatet efterlades i drift og uden opsyn.
  • Brug ikke varmeapparater med en beskadiget ledning eller stik, eller efter at varmeapparatet ikke fungerer korrekt, er blevet tabt eller beskadiget på nogen måde. Returner varmeren til et autoriseret serviceværksted for undersøgelse, elektrisk eller mekanisk justering eller reparation.
  • Må ikke bruges udendørs.
  • Placer aldrig varmeapparatet, hvor det kan falde ned i et badekar eller en anden vandbeholder.
  • Før ikke ledningen under gulvtæpper. Dæk ikke ledningen med tæpper, løbere eller lignende belægninger. Anbring ledningen væk fra trafikområdet, og hvor den ikke vil blive snublet over.
  • For at afbryde varmeapparatet skal du slukke for knapperne og derefter tage stikket ud af stikkontakten.
  • Indsæt eller lad ikke fremmedlegemer trænge ind i ventilations- eller udsugningsåbninger, da dette kan forårsage elektrisk stød eller brand eller beskadige varmeren.
  • For at forhindre en mulig brand, må du ikke blokere luftindtag eller udstødning på nogen måde. Må ikke bruges på bløde overflader, som f.eks. en seng, hvor åbninger kan blive blokeret.
  • En varmelegeme har varme og lysbuer eller gnistgivende dele indeni. Brug den ikke i områder, hvor benzin, maling eller brændbare dampe eller væsker bruges eller opbevares.
  • Brug kun denne varmeovn som beskrevet i denne vejledning. Enhver anden brug, som ikke anbefales af producenten, kan forårsage brand, elektrisk stød eller personskade.
  • Sæt altid varmeapparater direkte i en stikkontakt/stikkontakt. Brug aldrig med en forlængerledning eller flytbar el-hane (stikkontakt/stikdåse).
  • This fireplace is equipped with an automatic overheat protection system. If the heater overheats, the system will automatically shut off the power.
  • The product also features open window detection, which automatically switches off the heating function if a sudden drop in temperature is detected.

3. Pakkens indhold

Pak forsigtigt alle komponenter ud, og kontroller dem i forhold til listen nedenfor. Sørg for, at alle dele er til stede og ubeskadigede, før du fortsætter installationen.

  • Elektrisk Vægpejs
  • Fjernbetjening
  • Monteringsmateriale (skruer, ankre)
  • Instruktionsmanual (dette dokument)
Package contents including electric fireplace, remote control, and mounting hardware

Billede: Overview of the electric fireplace, remote control, and mounting accessories included in the package.

4. Specifikationer

FeatureDetalje
Modelnummer406270
Total Dimensions (LxWxH)91.5 x 12 x 43 cm (ca.)
Mounting Cutout (LxWxH)77 x 12 x 41 cm (ca.)
Kabellængde160 cm (ca.)
Strømudgang900 W / 1800 W
Voltage220 – 240 V
Fjernbetjenings batteriCR2025 (ikke inkluderet)
Vægt13.4 kg (ca.)
MaterialerPowder-coated steel, glass, copper, aluminum, rubber, polystyrene, ABS plastic, resin
InstallationstypeVægmontering
Varmeoutput1800 watt (maks.)
VentilationstypeVent-free
Specifik anvendelseIndendørs
Technical drawing with dimensions of the electric fireplace

Image: Detailed technical drawing showing the dimensions and components of the electric fireplace.

5. Opsætning og installation

The tectake Electric Wall Fireplace is designed for easy wall mounting using the provided materials. Follow these steps for a secure installation.

  1. Vælg placering: Select a suitable wall location, ensuring it is away from combustible materials and has access to a power outlet. Ensure the wall can support the fireplace's weight (approx. 13.4 kg).
  2. Mærkning: Use the provided mounting bracket or the fireplace itself to mark the drilling points on the wall. Ensure the marks are level.
  3. Boring: Drill holes at the marked points. Insert wall anchors if necessary, depending on your wall material.
  4. Monteringsbeslag: Fastgør monteringsbeslaget til væggen med de medfølgende skruer.
  5. Hæng pejs: Carefully lift the electric fireplace and hook it onto the mounted bracket. Ensure it is securely seated.
  6. Endelig kontrol: Verify that the fireplace is stable and level.
Electric fireplace mounted on a wall, showing the side profile and air vents

Image: The electric fireplace installed on a wall, highlighting its slim profile and heat outlets.

6. Betjeningsvejledning

6.1 Tænd/sluk

Plug the fireplace into a standard 220-240V electrical outlet. The unit can be turned on/off using the control panel on the unit, the remote control, or the Tuya app.

6.2 Varmefunktioner

The fireplace offers two heating levels: 900 W and 1800 W. Use the control panel, remote, or app to select the desired heat output. The integrated thermostat allows for precise temperature regulation between 15°C and 35°C. Heat is distributed evenly through wide ventilation openings.

Electric fireplace displaying realistic 3D flame effect and control panel

Image: The fireplace showcasing its realistic 3D flame effect and accessible control panel.

6.3 Flame and Ember Effects

Customize the ambiance with the realistic 3D flame effect. You can choose from:

  • 6 flammefarver: Select from various flame colors to match your mood.
  • 9 Ember Bed Colors: Choose different colors for the ember bed.
  • 5 lysstyrkeniveauer: Juster lysets intensitet.
  • 4 Flame Speeds: Control the movement speed of the flames.
Flere examples of customizable flame and ember colors on the electric fireplace

Billede: Eksamples of the various flame and ember color combinations available for customization.

6.4 Fjernbetjening og app-styring

The fireplace can be controlled via the included remote control or the Tuya app. The Tuya app is compatible with Alexa, Google Home, and Siri (via HomeKit), allowing voice control of temperature, flames, and timer functions.

Note: The remote control requires a CR2025 battery (not included).

Remote control and smartphone app interface for the electric fireplace

Image: The remote control and a smartphone screen showing the Tuya app interface for controlling the fireplace.

6.5 Timer funktion

Set the programmable timer for operation between 1 to 8 hours. This feature helps conserve energy and allows for scheduled heating.

7. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din elektriske pejs' lange levetid og optimale ydeevne.

  • Rensning: Tag altid stikket ud af pejsen før rengøring. Brug en blød, tøramp klud til at tørre de udvendige overflader af. Brug ikke slibende rengøringsmidler eller spray.
  • Ventilationsåbninger: Ensure the air intake and exhaust openings are free from dust and obstructions. Use a vacuum cleaner with a brush attachment to gently clean these areas.
  • Glaspanel: Clean the glass panel with a glass cleaner and a soft cloth. Avoid scratching the surface.
  • Opbevaring: Hvis pejsen opbevares i længere tid, skal stikket tages ud af stikkontakten og opbevares et tørt og støvfrit sted.

8. Fejlfinding

ProblemMulig årsagLøsning
Pejsen tænder ikke.No power supply; Power switch off; Remote control battery depleted.Check if the unit is plugged in and the wall outlet is functional. Ensure the main power switch on the unit is ON. Replace the remote control battery (CR2025).
Ingen varmeafgivelse.Heating function not activated; Overheat protection triggered; Open window detection activated.Activate the heating function via control panel, remote, or app. Check for obstructions around air vents. If overheat protection was triggered, unplug the unit, wait 15 minutes, and plug it back in. Close any open windows or doors.
Flammeeffekten virker ikke.Flame effect function not activated; LED malfunction.Ensure the flame effect is turned on. If the issue persists, contact customer support.
Fjernbetjeningen reagerer ikke.Batteriet er afladet; Blokering mellem fjernbetjening og enhed.Replace the CR2025 battery. Ensure there is a clear line of sight between the remote and the fireplace's receiver.

9. Garanti og support

This tectake Electric Wall Fireplace comes with a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For technical support, spare parts, or warranty claims, please contact tectake customer service. Contact information can typically be found on the manufacturer's webwebstedet eller på din købskvittering.

Fabrikant: tectake

Oprindelsesland: Kina

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.