ACEBEAM E10 2.0 Longest-Range Pocket EDC Flashlight User Manual

1. Introduktion

Thank you for choosing the ACEBEAM E10 2.0 Longest-Range Pocket EDC Flashlight. This manual provides essential information for the safe and efficient use of your device. Please read it thoroughly before operation and retain it for future reference.

Hvad er der i æsken

• E10 2.0 Flashlight (Battery Included) x 1
• Nøglesnor x 1
• O-ringe x 2
• USB-kabel x 1
• Brugervejledning x 1

2. Produktfunktioner

• Longest-Range Pocket EDC Flashlight: Compact design (3.47in long, 3.76oz) with a custom TIR optic and CREE XP-LR LED, delivering up to 1,200 lumens and a beam distance of 715 meters.
• Magnetisk base: The magnetic tail cap allows secure attachment to metal surfaces for hands-free operation.
• Genopladeligt: Features a USB-C rechargeable 16340 battery (included).
• Holdbar og robust: Constructed from aerospace-grade AL6061-T6 aluminum with a hard-anodized finish. Rated IP68 for waterproof performance and 1.5-meter impact resistance.
• Let at bære: Designed for everyday carry, fitting easily into pockets.
• Intuitive Side Switch: Provides smooth, one-handed control for mode changes.

Billede: Overview of the ACEBEAM E10 2.0 flashlight highlighting its key features.

3. Opsætning

Installation af batteri

1. Skru hætten på lommelygten af.
2. Insert the included 16340 rechargeable battery with the positive (+) end facing towards the head of the flashlight.
3. Screw the tail cap back on securely. Ensure the O-ring is properly seated to maintain waterproof integrity.

Note: The E10 2.0 is compatible with CR123A batteries, but the included 16340 battery offers USB-C charging capability.

Opladning af batteriet

The included 16340 battery features a built-in USB-C charging port. To charge:

1. Unscrew the tail cap and remove the 16340 battery from the flashlight.
2. Locate the USB-C port on the side of the battery.
3. Connect the provided USB-C cable to the battery and a suitable USB power source (e.g., phone charger, laptop).
4. The indicator light on the battery will show charging status (typically red for charging, green for fully charged).
5. Once fully charged, disconnect the cable and reinsert the battery into the flashlight, ensuring the tail cap is tightened.

Image: The ACEBEAM E10 2.0 flashlight demonstrating its convenient USB-C charging capability.

4. Betjeningsvejledning

The ACEBEAM E10 2.0 features an intuitive side switch for easy operation.

Grundlæggende betjening

• Tænd/sluk: Single press the side switch to turn the flashlight on or off.
• Skift lysstyrkeniveauer: When the flashlight is on, press and hold the side switch to cycle through Ultra-Low, Low, Medium, and High modes. Release the switch to select the desired brightness.

Særlige tilstande

• Turbo tilstand: Double-press the side switch quickly to activate Turbo mode (1200 lumens). Double-press again to return to the previously used mode.
• Strobetilstand: Triple-press the side switch quickly to activate Strobe mode. Triple-press again to return to the previously used mode.

Lockout funktion

To prevent accidental activation, the flashlight has a lockout function:

• Aktivér spærring: When the flashlight is off, press and hold the side switch for approximately 3 seconds until the light flashes briefly, indicating it is locked.
• Deaktiver spærring: Press and hold the side switch for approximately 3 seconds until the light turns on in Ultra-Low mode, indicating it is unlocked.

Image: Illustration of the intuitive side switch and available lighting modes.

5. Vedligeholdelse

Rensning

• Tør lommelygtens hus af med en ren, blød klud.
• Clean the lens with a lens cloth to maintain optimal light output.

Batteripleje

• Charge the battery regularly, especially if the flashlight will not be used for an extended period.
• Opbevar batteriet på et køligt, tørt sted.

O-ringe

• Periodically inspect the O-rings for wear or damage.
• Replace damaged O-rings with the provided spares to maintain the IP68 waterproof rating.
• Apply a thin layer of silicone grease to the O-rings to ensure a good seal and prevent drying.

6. Fejlfinding

• Lommelygten tænder ikke:
      - Ensure the battery is correctly installed with the positive (+) end facing the head.
      - Check if the battery is charged. Remove and charge the battery using the USB-C port.
      - Verify the flashlight is not in lockout mode. Press and hold the side switch for 3 seconds to unlock.
• Lyset er svagt eller flimrer:
      - The battery level may be low. Recharge the battery.
      - Ensure the tail cap is fully tightened. A loose connection can cause intermittent power.
• Water ingress after exposure:
      - Check the O-rings for any damage or improper seating. Replace if necessary and ensure they are lubricated.
• Lommelygten bliver varm under brug:
      - High brightness modes (especially Turbo) generate significant heat. This is normal. The flashlight has built-in thermal regulation to prevent overheating by automatically reducing output.

If you experience issues not covered here, please contact ACEBEAM customer support.

7. Specifikationer

Image: Detailed technical specifications table for the E10 2.0 flashlight.

8. Garanti og support

Garantioplysninger

The ACEBEAM E10 2.0 flashlight comes with a 10 års producentgaranti, hvilket sikrer langsigtet pålidelighed og ro i sindet.

Kundesupport

For any questions, technical assistance, or warranty claims, please contact ACEBEAM customer support or visit the official ACEBEAM store online.

Official ACEBEAM Store: Besøg butik