Soundstream SPM.804

Soundstream SPM.804 8-Inch Midrange Pro Audio Speaker

Instruktionsmanual

1. Introduktion

Thank you for choosing the Soundstream SPM.804 8-inch Midrange Pro Audio Speaker. This speaker is designed to deliver clear, high-energy sound for both car and professional audio systems. It features a durable construction for reliable performance and enhanced mid-frequency clarity.

Front view of the Soundstream SPM.804 8-inch midrange speaker

Figur 1: Forside view of the Soundstream SPM.804 speaker.

This manual provides essential information for the proper installation, operation, and maintenance of your SPM.804 speakers. Please read it thoroughly before installation and keep it for future reference.

2. Hvad er der i æsken

  • Soundstream SPM.804 8-inch Midrange Pro Audio Speaker (Pair)
Product packaging for the Soundstream SPM.804 speakers

Figure 2: Product packaging showing the pair of Soundstream SPM.804 speakers.

3. Opsætning og installation

3.1 Sikkerhedsforanstaltninger

  • Frakobl køretøjets batteri, før du påbegynder elektrisk arbejde.
  • Ensure proper ventilation for the speakers to prevent overheating.
  • Brug passende værktøj og sikkerhedsbriller under installationen.
  • Consult a professional installer if you are unsure about any steps.

3.2 Montering

The SPM.804 speakers are designed for easy installation into various enclosures or door panels. Ensure the mounting surface is sturdy and free from obstructions.

  • Monteringsdybde: 2.79 tommer (70.8 mm)
  • Udskåret diameter: 7.17 tommer (182 mm)
  1. Carefully measure and mark the desired mounting location.
  2. Cut a circular opening with the specified cut-out diameter.
  3. Bor pilothuller til monteringsskruerne.
  4. Place the speaker into the opening, ensuring a snug fit.
  5. Secure the speaker with appropriate screws, tightening them evenly to prevent distortion of the speaker frame.
Vinklet view of the Soundstream SPM.804 speaker, showing the cone and surround

Figur 3: Vinklet view of the speaker, illustrating its profile til montering.

3.3 Ledningsføring

The SPM.804 speakers have a 4 Ohm impedance. Ensure your amplifier is stable at this impedance and can provide sufficient power.

  1. Identify the positive (+) and negative (-) terminals on the speaker and your amplifier. The speaker terminals are typically marked.
  2. Tilslut den positive (+) terminal på højttaleren til den positive (+) udgang på din amphøjttaler ved hjælp af højttalerkabel af høj kvalitet.
  3. Tilslut den negative (-) terminal på højttaleren til den negative (-) udgang på din amplivligere.
  4. Sørg for, at alle forbindelser er sikre og fri for kortslutninger.
Bag view of the Soundstream SPM.804 speaker showing the terminals and magnet

Figur 4: Bagside view of the speaker, highlighting the wiring terminals.

4. Betjeningsvejledning

4.1 Strømhåndtering

The SPM.804 speakers are rated for 250W RMS and 500W Max power. It is crucial to match your amplifier's output to these specifications to prevent damage.

  • Avoid overdriving the speakers with excessive power, which can lead to distortion and damage.
  • Indstil din amplifier's gain settings correctly to prevent clipping.

4.2 Indkøringsperiode

Tillad en indkøringsperiode på cirka 10-20 timer med normal lytning, før du bruger højttalerne ved høj lydstyrke. Dette giver højttalerens ophængningskomponenter mulighed for at løsne sig og fungere optimalt.

4.3 Delefiltreindstillinger

For optimal performance and speaker longevity, it is recommended to use a high-pass filter (HPF) with your midrange speakers. A typical starting point for the crossover frequency is around 100-150 Hz, with a slope of 12dB/octave or 24dB/octave. Adjust this setting based on your system's overall frequency response and your listening preferences.

5. Vedligeholdelse

Your Soundstream SPM.804 speakers require minimal maintenance to ensure long-lasting performance.

  • Keep the speakers free from dust and debris. Use a soft, dry cloth to gently wipe the cone and surround.
  • Undgå at udsætte højttalerne for ekstreme temperaturer eller fugt.
  • Do not apply any liquids or cleaning agents directly to the speaker cone or surround.
  • Kontroller regelmæssigt ledningsforbindelserne for tæthed og korrosion.

6. Fejlfinding

If you experience issues with your SPM.804 speakers, refer to the following common problems and solutions:

ProblemMulig årsagLøsning
Ingen lyd fra højttalerenLøse eller forkerte ledninger; Amplifier off or in protect mode; Blown fuseKontroller alle ledningsforbindelser; Bekræft amplifier status; Inspect and replace fuses if necessary
Forvrænget lydAmplifier gain too high (clipping); Incorrect crossover settings; Damaged speakerReducere amplifier gain; Adjust crossover frequencies; Inspect speaker for physical damage
Svag eller dæmpet lydIncorrect polarity (speaker wired out of phase); Low power from amplivligereVerify speaker wire polarity (+ to + and - to -); Ensure amplifier is providing adequate power
Højttaleren afbrydes periodiskLøse forbindelser; Overophedning amplifier; Short circuit in wiringCheck all wiring; Ensure proper ventilation for amplifier; Inspect wiring for shorts

If the problem persists after attempting these solutions, please contact Soundstream customer support or a qualified audio technician.

7. Specifikationer

Detailed technical specifications for the Soundstream SPM.804 speaker:

FeatureSpecifikation
ModelnummerSPM.804
Højttaler typeMidrange Pro Audio Speaker
Højttaler størrelse8 tommer
Impedans4 Ohm
RMS-strøm250 watt
Max Power500 watt
Følsomhed95.5 dB
Frekvensrespons100 Hz - 5 kHz (typical for midrange)
StemmespoleHigh-temp EISV
Magnet materialeFerrite (44 oz)
KegelmaterialeSort papir
SurroundmaterialeKlæde
KurvematerialeBlack-coated Steel
Monteringsdybde2.79 tommer (70.8 mm)
Udskæringsdiameter7.17 tommer (182 mm)
Varedimensioner (D x B x H)3.3" D x 8" B x 8" H
Antal enheder2.0 stk. (par)
ForbindelsesteknologiKablet
FarveSort
UPC709483071797

8. Garantioplysninger

Soundstream provides a 1 års begrænset producentgaranti for the SPM.804 speakers. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

The warranty does not cover damage caused by improper installation, abuse, accident, neglect, unauthorized repair, or modification. For full warranty terms and conditions, please refer to the official Soundstream webwebsted eller kontakt kundesupport.

9. Kundesupport

For technical assistance, warranty inquiries, or additional product information, please visit the official Soundstream webwebsted eller kontakt deres kundeserviceafdeling.

  • Soundstream Officiel Webwebsted: www.soundstream.com
  • Der henvises til webwebsted for kontaktoplysninger, ofte stillede spørgsmål og yderligere ressourcer.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.