Meliconi Floor600 TV Floor Stand Instruction Manual

1. Introduktion

This manual provides detailed instructions for the assembly, operation, and maintenance of your Meliconi Floor600 TV Floor Stand. Please read this manual thoroughly before installation and retain it for future reference. This stand is designed to support televisions ranging from 40 to 70 inches with VESA mounting patterns of 300x300, 400x400, and 600x400 mm, and a maximum weight capacity of 45 kg.

2. Sikkerhedsoplysninger

ADVARSEL: Failure to read and follow all instructions can result in personal injury or property damage. The manufacturer is not responsible for damage or injury caused by incorrect assembly or use.

• Ensure the floor stand is placed on a stable, level surface.
• Overskrid ikke den maksimale vægtkapacitet på 45 kg (99 lbs).
• Verify your TV's VESA pattern and weight are compatible with this stand before installation.
• Keep children and pets away from the stand during assembly.
• Use all provided hardware. Do not substitute parts.
• Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver fastgjorte.
• Avoid placing heavy objects on the stand's base or TV.
• Do not attempt to move the stand with the TV attached without assistance.

3. Produktet er slutview

The Meliconi Floor600 is a robust floor stand designed for large flat-panel televisions. It features a durable steel structure and an elegant tempered glass base for stability. The stand offers adjustable height, tilt, and rotation functions for optimal viewing angles. Integrated cable management helps maintain a tidy appearance.

Nøglefunktioner:

• Universal compatibility for TVs 40" to 70".
• VESA compatibility: 300x300, 400x400, 600x400 mm.
• Maksimal bæreevne: 45 kg.
• Adjustable height (95 cm, 99 cm, 103 cm).
• Tilt and rotation functionality.
• Tempered glass base with anti-slip and anti-scratch pads.
• Integrated cable management system.
• Protective foam on the bracket to prevent TV scratches.

4. Opsætning og montering

Before starting, ensure you have all components and tools. It is recommended to have two people for assembly, especially when mounting the TV.

4.1 Package Contents (Typical)

• Base af hærdet glas
• Upright Support Pole
• TV monteringsbeslag
• TV-monteringsarme (2x)
• Hardware Kit (screws, washers, spacers, anti-slip pads)
• Kabelhåndteringsklemmer/dæksler
• Instruktionsmanual

4.2 Monteringstrin

1. Attach Anti-Slip Pads to Base: Carefully place the tempered glass base on a soft, clean surface. Attach the provided anti-slip and anti-scratch pads to the bottom corners of the glass base.
2. Assemble Base and Upright Pole: Secure the upright support pole to the tempered glass base using the designated screws and washers from the hardware kit. Ensure all connections are tight.
3. Attach TV Mounting Bracket to Pole: Slide the main TV mounting bracket onto the upright support pole. Adjust it to your desired initial height (95 cm, 99 cm, or 103 cm) and secure it firmly with the provided bolts.

   

4. Attach Mounting Arms to TV:
   • Identify the VESA mounting holes on the back of your television.
   • Vælg de passende skruer, skiver og afstandsstykker fra hardwaresættet, der passer til dit tv's VESA-mønster.
   • Attach the two TV mounting arms to the back of your TV. Ensure the arms are oriented correctly so they can hook onto the main mounting bracket. The protective foam on the arms should face the TV.
5. Monter TV på stativ: With assistance, carefully lift the television and hook the mounting arms onto the main TV mounting bracket on the stand. Ensure the TV is securely seated. Fasten any safety screws or locking mechanisms to prevent accidental dislodging.

   

6. Kabelstyring: Route all TV and device cables through the integrated cable management system on the upright pole. Use the provided clips or covers to keep cables neat and organized.

5. Betjeningsvejledning

5.1 Justering af TV-højde

The TV mounting bracket can be set at three different heights: 95 cm, 99 cm, and 103 cm (measured from the floor to the center of the VESA mounting area). To adjust the height, you will need to loosen the bolts securing the main TV mounting bracket to the upright pole, reposition it, and then re-tighten the bolts firmly. It is recommended to remove the TV before adjusting the height for safety.

5.2 Justering af TV-hældning

The TV can be tilted to achieve the optimal viewing angle. Locate the tilt adjustment knobs or levers on the side of the TV mounting bracket. Loosen these, adjust the TV to the desired tilt angle, and then securely tighten the knobs/levers to lock the position.

5.3 Adjusting TV Rotation

The TV can be rotated horizontally to face different directions. Gently rotate the television to the desired angle. Ensure the base remains stable and does not lift or slide during rotation. Avoid excessive force.

6. Vedligeholdelse

• Rensning: Use a soft, dry cloth to clean the stand. For stubborn marks on the steel or glass, a slightly damp en klud med et mildt rengøringsmiddel kan bruges, efterfulgt af tørring. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Tjek forbindelser: Periodically (e.g., every 3-6 months) check all screws and bolts to ensure they are still tight and secure. Re-tighten if necessary.
• Kabelstyring: Ensure cables are not pinched or strained. Re-route if needed.

7. Fejlfinding

• TV feels unstable after mounting:
  • Ensure all assembly screws, especially those connecting the pole to the base and the bracket to the pole, are fully tightened.
  • Verify the TV's weight does not exceed 45 kg.
  • Confirm the TV mounting arms are correctly hooked onto the main bracket and any safety screws are engaged.
  • Sørg for, at stativet står på en flad, jævn overflade.
• Difficulty adjusting tilt or rotation:
  • For tilt, ensure the adjustment knobs/levers are sufficiently loosened before attempting to change the angle.
  • For rotation, ensure no cables are snagged or preventing movement. Do not force the rotation.
• Ridser på gulvet:
  • Ensure the anti-slip/anti-scratch pads are correctly installed on the bottom of the tempered glass base.
  • Avoid dragging the stand; lift it when moving.

8. Specifikationer

9. Garanti og support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Meliconi webwebsted. Gem din købsbevis til garantikrav.