Dyness PPS300-4 Portable Power Station User Manual

1. Vigtige sikkerhedsoplysninger

Læs alle sikkerhedsadvarsler og instruktioner, før du bruger dette produkt. Manglende overholdelse af advarsler og instruktioner kan resultere i elektrisk stød, brand og/eller alvorlig personskade.

Do not disassemble, repair, or modify the unit or the battery pack.
Placer ikke enheden i nærheden af ild, og udsæt den ikke for varme. Holdes væk fra direkte sollys.
Do not charge, use, or store the unit in a bathroom or in an area exposed to water or humidity.
Brug kun det medfølgende eller godkendte tilbehør.
Do not use the unit if it is damaged or has been modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
Keep the unit clean and dry. Avoid dusty or wet environments.
Sørg for tilstrækkelig ventilation under brug og opladning for at forhindre overophedning.

2. Hvad er der i æsken

Bekræft at alle varer er til stede i din pakke:

1 x Dyness PPS300-4 Portable Power Station
1 x AC ladekabel
1 x bilcigaretkabel
1 x brugermanual

Contents of the Dyness PPS300-4 box including the power station, AC charging cable, car charging cable, and user manual. — Image: The Dyness PPS300-4 Portable Power Station and its included accessories: AC charging cable, car charging cable, and user manual.

3. Produktet er slutview

3.1 Porte og kontroller

The Dyness PPS300-4 features multiple output ports and intuitive controls for versatile power delivery.

AC stikkontakt: 110V Pure Sine Wave output for standard household appliances.
USB-C-port: Til opladning af kompatible USB-C-enheder.
USB-A-port: Til opladning af kompatible USB-A-enheder.
DC 5521 Outputs (x2): Til 12V DC-enheder.
Car Charging Outlet: 12V DC-udgang til bilapparater.
LED lys knap: Activates the built-in LED light with multiple modes.
AC Power On/Off Button: Styrer AC-udgangen.
Display On/Off Button: Toggles the LCD display.
DC Power On/Off Button: Controls the DC and USB outputs.

Dyness PPS300-4 showing all its output ports including AC, USB-C, USB-A, DC 5521, and car charging outlet. — Billede: En detaljeret view of the Dyness PPS300-4, highlighting its six output ports: one AC outlet, one USB-C port, one USB-A port, two DC 5521 outputs, and one car charging outlet.

3.2 LCD-skærm

LCD-displayet giver information om kraftværkets status i realtid:

Batteriniveauindikator: Viser den aktuelle opladningsprocenttage.
Input/Output Wattage: Displays the current power input (charging) or output (discharging) in watts.
Resterende tid: Estimates the hours/minutes remaining for charging or discharging based on current power draw.

4. Opsætning

4.1 Indledende opladning

Before first use, fully charge the Dyness PPS300-4. This ensures optimal battery performance and calibration.

Connect the provided AC charging cable to the power station's input port.
Sæt den anden ende i en almindelig stikkontakt.
LCD-displayet viser opladningsstatus. Oplad indtil batteriindikatoren viser 100%.

4.2 Placering

Place the power station on a stable, flat surface in a well-ventilated area. Avoid placing it in direct sunlight or near heat sources.

5. Betjeningsvejledning

5.1 Opladning af kraftværket

The Dyness PPS300-4 offers multiple charging options:

AC vægudtag: Connect the AC charging cable to a wall outlet. Full charge in approximately 3.5 hours.
Biloplader: Use the provided car cigarette cable to charge from your vehicle's 12V outlet. Full charge in approximately 3.5 hours.
Solpanel (valgfrit): Connect a compatible solar panel (12V-28V DC input, up to 100W) to the DC input port. Full charge in approximately 3.5 hours (depending on sunlight intensity).
Dual Charging (AC + Solar): Combine AC wall charging with solar panel input for faster charging. Full charge in approximately 2 hours.

Four charging methods for the Dyness PPS300-4: AC recharging, dual charging (AC+solar), car outlet charging, and solar panel charging. — Image: Illustration of the four flexible charging options for the Dyness PPS300-4: AC wall outlet, dual charging (AC and solar panel), car outlet, and solar panel charging, with approximate charging times.

5.2 Using the Power Station to Power Devices

To use the output ports:

Press the corresponding output button (AC or DC) to activate the desired ports. The button will illuminate when active.
Plug your device into the appropriate port.
The LCD display will show the output wattage and estimated remaining runtime.
To turn off an output, press its button again.

The power station can deliver up to 300W of continuous AC power and has a 600W peak surge capacity. Ensure your devices do not exceed these limits.

Dyness PPS300-4 powering a laptop, phone, and other devices, with examples of device usage times. — Image: The Dyness PPS300-4 powering various devices such as a laptop, smartphone, and drone, illustrating its capacity for multiple appliances.

5.3 Pass-through-opladning

The Dyness PPS300-4 supports pass-through charging, allowing you to charge the power station while simultaneously powering external devices.

5.4 LED nødlys

Press the LED light button to cycle through three brightness levels and an SOS mode. Press and hold to turn off.

Couple using the Dyness PPS300-4's emergency light feature during camping. — Image: The Dyness PPS300-4 providing illumination with its built-in emergency light during an outdoor campscenarie.

6. Vedligeholdelse

6.1 Pleje af batterier

The Dyness PPS300-4 uses a durable LiFePO4 battery. To maximize its lifespan:

Avoid regularly discharging the battery below 20%.
For long-term storage, charge the unit to approximately 60-80% and recharge every 3-6 months.

Illustration of a LiFePO4 battery with '3000+ Cycles' text, indicating long lifespan. — Image: A visual representation of the LiFePO4 battery technology, emphasizing its long cycle life of over 3000 cycles.

6.2 Rengøring og opbevaring

Tør enheden af med en tør, blød klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
Opbevar enheden et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer.
Sørg for, at enheden er slukket, når den ikke er i brug.

7. Fejlfinding

If you encounter issues with your Dyness PPS300-4, refer to the following common problems and solutions:

Problem	Mulig årsag	Løsning
Enheden tænder ikke	Batteriet er helt afladet; Tænd/sluk-knappen er ikke trykket korrekt ind.	Charge the unit immediately; Press and hold the main power button for a few seconds.
Ingen udgang fra AC/DC/USB-porte	Output port not activated; Device power draw exceeds limit; Cable not connected properly.	Press the respective AC/DC button to activate; Check device wattage; Reconnect cable securely.
Oplader langsomt	Using a single charging method; Environmental factors (e.g., low sunlight for solar).	Try dual charging (AC + Solar); Ensure solar panel is in direct sunlight.
Fan is running loudly	Normal operation for cooling internal components, especially under heavy load or during charging.	This is normal. The fan activates as needed to maintain optimal operating temperature.

8. Specifikationer

Mærke	Dyness
Model	PPS300-4
Batterikapacitet	256Wh LiFePO4
AC udgang	300W (Continuous), 600W (Peak), 110V, 60Hz, Pure Sine Wave
Udgangsporte	1 x AC Outlet, 1 x USB-C, 1 x USB-A, 2 x DC5521, 1 x Car Outlet
Charging Inputs	AC Wall Outlet, Car Charger, Solar Panel (12V-28V DC, up to 100W)
Dimensioner (L x B x H)	9.3 cm x 5 cm x 6.8 cm
Vægt	6.4 lbs
Cyklus liv	3000+ cyklusser til 80% kapacitet
Særlige funktioner	Extra-Long Run Time, Lightweight, Portable, Super Quiet, USB Port, LED Emergency Light (3 modes)

9. Garanti og support

9.1 Garantioplysninger

The Dyness PPS300-4 Portable Power Station comes with a 2 års producentgaranti fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.

9.2 Kundesupport

For technical assistance, warranty claims, or general inquiries, please visit the official Dyness Store or contact customer service:

Dyness Official Store: https://www.amazon.com/stores/Dyness/page/7AEAACF1-EC80-4BAE-A3F9-E6E45C1B41C3

Dyness PPS300-4