GEYA GPS6-VAK 2P-80A-220V Adjustable Over/Under Voltage og Strømbeskytter

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of the GEYA GPS6-VAK 2P-80A-220V Adjustable Over/Under Voltage and Current Protector. This device is designed to safeguard electrical appliances and circuits from damage caused by voltage fluctuations (overvoltage, undervoltage) and excessive current (overcurrent). It also features an integrated Kilowatt-hour (KWH) measurement function for energy monitoring.

Læs venligst denne manual grundigt inden installation og brug for at sikre korrekt funktion og sikkerhed.

2. Sikkerhedsoplysninger

ADVARSEL: Risiko for elektrisk stød. Installation og vedligeholdelse bør kun udføres af kvalificeret personale.

• Afbryd altid strømmen, før du installerer eller servicerer enheden.
• Ensure proper wiring according to local electrical codes and the provided wiring diagram.
• Brug ikke apparatet, hvis det er beskadiget eller ikke fungerer korrekt.
• Hold enheden væk fra vand og overdreven fugt.
• Kontroller, at voltage and current ratings of the device match your application requirements.

3. Produktfunktioner

• Smart digitalt display: A clear LED screen displays real-time voltage, current, and fault status for quick monitoring.
• Avanceret beskyttelse: Provides protection against overvoltage og undervoltage. Factory default settings are 275V for overvoltage and 175V for undervoltage, ensuring appliance safety.
• Justerbare parametre: Available in 40A, 63A, and 80A variants, the GPS6 accommodates a wide range of electrical loads.
• Alsidig anvendelse: Offers a factory default reset time of 30 seconds, adjustable from 2 to 900 seconds to meet specific needs.
• Kompakt størrelse: Ultra-small size for easy integration with 35mm DIN rail mounting, simplifying installation and providing a secure connection.
• KWH Measurement: Integrated Kilowatt-hour measurement for energy consumption monitoring.

4. Produktet er slutview og komponenter

Figur 4.1: Forside view of the GEYA GPS6-VAK protector, showing the large-screen color digital display. The display indicates voltage (V), current (A), and cumulative KWH. Control buttons (SET, Up, Down, Power) are located below the screen.

The GEYA GPS6-VAK protector features a clear digital display and intuitive controls for easy monitoring and configuration. Key components include:

• Digital skærm: Viser realtidsvolumentage, current, and KWH readings, along with fault indicators.
• Kontrolknapper:
  • SÆT: Går ind i og bekræfter indstillingstilstande.
  • Pil op/ned: Juster parameterværdier.
  • Power knap: Manual power on/off or reset.
• Terminaler: Input (N, L) and Output terminals for wiring connections.
• DIN-skinneklemme: For secure mounting on a 35mm DIN rail.

Figure 4.2: Dimensions of the GEYA GPS6-VAK protector (86mm height, 38mm width, 67.5mm depth) and illustration of 35mm DIN rail mounting. This image also shows the side view with terminals.

5. Specifikationer

Figure 5.1: Detailed specifications table for the GEYA GPS6-VAK series, including model number, rated voltage, frequency, and operational current.

6. Installation

6.1 Montering

The GEYA GPS6-VAK protector is designed for 35mm DIN rail mounting. Ensure the DIN rail is securely fastened within an electrical enclosure or distribution box.

1. Align the device's mounting clip with the DIN rail.
2. Press the device firmly onto the rail until the clip engages and locks it in place.
3. Verify that the device is stable and does not wobble.

6.2 Ledningsdiagram

Connect the device according to the following single-phase wiring diagram. Ensure all connections are tight and secure to prevent loose contacts and potential hazards.

Figure 6.1: Wiring diagram for the GEYA GPS6-VAK protector. The 'N' terminal connects to the neutral line, and the 'L' terminal connects to the live line. The output terminals connect to the load.

• Connect the incoming Neutral (N) wire to the 'N' input terminal.
• Connect the incoming Live (L) wire to the 'L' input terminal.
• Connect the outgoing Neutral wire to the 'N' output terminal (Load Neutral).
• Connect the outgoing Live wire to the 'L' output terminal (Load Live).
• Ensure that the wire gauge is appropriate for the maximum current rating (80A for this model).

7. Opsætning og konfiguration

The GPS6-VAK allows for adjustment of overvoltage, undervoltage, overcurrent, and reset time parameters. Refer to the digital display and control buttons for navigation and setting.

Figure 7.1: Comparison highlighting the adjustable voltage/current protector with KWH measuring features of the GPS6-VAK model, including rated supply voltage, frequency, and setting ranges.

7.1 Adgang til indstillinger

Tryk og hold på SÆT button for a few seconds to enter the parameter setting mode. Use the Up og Ned arrow buttons to navigate through different parameters.

7.2 Justering af parametre

1. Once in setting mode, press SÆT to select a parameter (e.g., Overvoltage tærskel, Undervoltage threshold, Overcurrent threshold, Reset Time).
2. Brug Up og Ned piletasterne for at justere værdien.
3. Trykke SÆT again to confirm the value and move to the next parameter or exit the setting mode.
4. If no button is pressed for a certain period, the device may automatically exit the setting mode, saving the changes.

Standardindstillinger:

• Overvoltage: 275V
• Undervoltage: 175V
• Reset Time: 30 seconds (Adjustable from 2 to 900 seconds)
• Overcurrent: Max operating current is 80A for this model. The overcurrent trip threshold can be set within the device's capabilities.

8. Betjening

Once installed and configured, the GEYA GPS6-VAK operates automatically to protect your electrical system. The digital display provides continuous feedback on the system's status.

8.1 Vis aflæsninger

• Voltage (V): Displays the real-time line voltage.
• Nuværende (A): Displays the real-time load current. (Note: Current value may not be displayed if below 1A).
• KWH: Displays the cumulative Kilowatt-hour consumption. (Note: KWH may not be displayed if below 0.01).
• Statusindikatorer: LEDs or symbols on the screen may indicate normal operation, overvoltage, undervoltage, overcurrent, or other fault conditions.

8.2 Protection and Recovery

When a fault condition (overvoltage, undervoltage, or overcurrent) is detected, the device will automatically cut off the power supply to the load to prevent damage. After the voltage or current returns to normal within the set parameters and the configured reset time has elapsed, the device will automatically restore power.

The power button can also be used for manual power on/off or to manually reset the device after a trip, if allowed by the current fault state.

9. Vedligeholdelse

The GEYA GPS6-VAK protector requires minimal maintenance to ensure long-term reliable operation.

• Regelmæssig inspektion: Periodically check the device for any visible signs of damage, loose connections, or discoloration.
• Rensning: Rengør om nødvendigt forsigtigt enhedens yderside med en tør, blød klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler. Sørg for, at strømmen er afbrudt før rengøring.
• Miljøforhold: Ensure the operating environment is within the specified temperature and humidity ranges to prevent premature wear.

10. Fejlfinding

Hvis enheden ikke fungerer som forventet, kan du overveje følgende almindelige problemer og løsninger:

For issues not covered here, or if troubleshooting steps do not resolve the problem, please contact GEYA customer support.

11. Garanti og support

GEYA products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official GEYA website. For technical support, product inquiries, or service, please contact GEYA customer service through their official channels.

Fabrikant: GEYA

Oprindelsesland: Kina