Fanttik S100 APEX Tire Inflator Portable Air Pump User Manual

1. Vigtige sikkerhedsinstruktioner

Read all instructions before using this device. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder inviterer til ulykker.
• Brug ikke enheden i eksplosive atmosfærer, f.eks. i nærheden af ​​brandfarlige væsker, gasser eller støv.
• Hold børn og omkringstående væk, mens du betjener enheden. Distraktioner kan få dig til at miste kontrollen.
• Avoid accidental starting. Ensure the switch is in the off-position before connecting to a power source, picking up, or carrying the device.
• Do not over-inflate. Follow recommended pressure levels for tires and other inflatables.
• Efterlad ikke enheden uden opsyn under drift.
• Store idle devices out of the reach of children and do not allow persons unfamiliar with the device or these instructions to operate the device.
• Brug kun tilbehør specificeret af producenten.
• Do not expose the device to rain or wet conditions. Water entering the device will increase the risk of electric shock.
• Brug ikke enheden, hvis den er blevet tabt eller beskadiget.

2. Produktet er slutview

2.1 Enhedsbeskrivelse

The Fanttik S100 APEX is a portable, rechargeable tire inflator designed for quick and precise inflation of various items, including car tires, motorcycle tires, bicycle tires, and sports balls. It features a digital display, multiple inflation modes, and a built-in flashlight.

2.2 Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• Fanttik S100 APEX Tire Inflator
• USB opladningskabel
• Luftrør
• Needle Valve Adaptor
• Schrader-Presta ventiladapter
• Brugervejledning (dette dokument)
• Opbevaringspose

2.3 Nøglefunktioner

• Super-Fast Inflation: Inflates a 26.3-inch medium-sized car tire (28-33 PSI) in approximately 56 seconds.
• Høj præcision: Achieves inflation with an accuracy of ±1 PSI.
• Langtidsholdbart batteri: Provides up to 40 minutes of continuous operation on a full charge.
• Betjening med ét klik: Intuitive design for ease of use.
• Alsidig: Supports multiple inflation modes (Car, Motorcycle, Bike, Ball, Manual).
• Multi-Unit Display: Displays pressure in PSI, BAR, and KPA.
• Bærbart design: Allows for flexible use from any angle.

Image: The Fanttik S100 APEX display highlighting its one-click preset modes for Car, Motorcycle, Bike, Ball, and Manual, along with the supported pressure units: PSI, BAR, and KPA.

3. Kom godt i gang (opsætning)

3.1 Opladning af enheden

1. Connect the provided USB charging cable to the charging port on the Fanttik S100 APEX.
2. Connect the other end of the USB cable to a compatible USB power adapter (not included) or a USB port on a computer.
3. The battery indicator on the display will show the charging status. Charge the device fully before first use.

3.2 Montering af luftslangen

1. Screw one end of the air tube securely into the air outlet port on the top of the inflator.
2. Select the appropriate valve adaptor (Schrader, Presta, or Needle) for the item you wish to inflate.
3. Attach the selected adaptor to the free end of the air tube.

4. Betjening

4.1 Tænd/sluk

• For at tænde skal du trykke på tænd/sluk-knappen og holde den nede (O) for a few seconds until the display illuminates.
• To power off, press and hold the power button (O) again. The device will also automatically power off after a period of inactivity.

4.2 Valg af oppustningstilstand

The S100 APEX offers five preset inflation modes:

1. With the device powered on, press the mode button (M) to cycle through the available modes: Car, Motorcycle, Bike, Ball, and Manual.
2. Select the mode appropriate for your item. Each mode has a default pressure setting that can be adjusted.

Image: A person using the Fanttik S100 APEX to inflate a car tire, demonstrating the device's portability and ease of use for vehicle maintenance.

Image: The Fanttik S100 APEX connected to and inflating a bicycle tire, illustrating its suitability for various types of tires.

Image: The Fanttik S100 APEX inflating a basketball, showcasing its versatility for sports equipment.

4.3 Indstilling af måltryk

1. After selecting a mode, the current pressure will be displayed.
2. Brug knapperne '+' og '-' til at justere måltrykket. Displayet viser måltrykket blinkende.
3. Tryk på enhedsknappen (U) to switch between PSI, BAR, and KPA pressure units.

Billede: Et nærbillede view of the Fanttik S100 APEX's digital display, showing both the current tire pressure and the user-set target pressure during inflation.

4.4 Start og stop af oppustning

1. Once the target pressure is set, press the power button (O) for at starte inflationen.
2. Apparatet stopper automatisk, når det ønskede tryk er nået.
3. To manually stop inflation at any time, press the power button (O) igen.
4. Disconnect the air tube from the valve after inflation is complete.

4.5 Brug af lommelygten

• To turn on the flashlight, press the flashlight button (usually indicated by a light bulb icon).
• Press the flashlight button again to cycle through different light modes (e.g., steady, SOS, flashing) or to turn it off.

Image: A person utilizing the built-in flashlight of the Fanttik S100 APEX to illuminate a car tire in low-light conditions, highlighting its utility for nighttime use.

5. Vedligeholdelse og opbevaring

5.1 Rengøring

• Tør ydersiden af ​​enheden af ​​med en blød, damp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Sørg for, at enheden er helt tør, før den opbevares eller genoplades.

5.2 Pleje af batterier

• To prolong battery life, charge the device at least once every three months, even if not in use.
• Undgå at opbevare enheden i ekstreme temperaturer.

5.3 Opbevaring

• Store the Fanttik S100 APEX in its provided storage bag in a cool, dry place, away from direct sunlight and moisture.
• Keep all accessories organized with the main unit.

6. Fejlfinding

7. Specifikationer

8. Garanti og kundesupport

8.1 Producentgaranti

The Fanttik S100 APEX comes with a 1-Year Manufacturer Warranty. Please retain your proof of purchase for warranty claims.

8.2 Kundesupport

For technical assistance, warranty inquiries, or replacement parts, please contact Fanttik customer support. Refer to the official Fanttik webwebstedet eller din købsdokumentation for kontaktoplysninger.