Bewinner H310M-S2 Motherboard User Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your Bewinner H310M-S2 Motherboard. Please read this manual thoroughly before installing or using the product to ensure correct setup and optimal performance. This motherboard is designed to support 8th and 9th generation Intel Core i9, i7, i5, and i3 processors, as well as Pentium and Celeron series processors, utilizing the LGA 1151 socket.

2. Sikkerhedsoplysninger

Overhold følgende sikkerhedsforanstaltninger under installation og drift:

• Afbryd altid strømforsyningen til din computer, før du installerer eller fjerner komponenter.
• Bær en antistatisk håndledsrem, eller rør ofte ved en jordforbundet metalgenstand for at aflade statisk elektricitet, før du håndterer bundkortet eller andre komponenter.
• Hold bundkortet i kanterne for at undgå at berøre følsomme komponenter.
• Sørg for ordentlig ventilation i computerens kabinet for at forhindre overophedning.
• Hold bundkortet væk fra fugt og ekstreme temperaturer.

3. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• Bewinner H310M-S2 Motherboard
• I/O Backplate

Hvis der mangler eller er beskadigede varer, bedes du kontakte din forhandler.

4. Produktet er slutview

The Bewinner H310M-S2 is a micro-ATX motherboard featuring the Intel H310 Express Chipset. It is designed for robust performance in home, office, and gaming environments.

Billede: Top-down view of the Bewinner H310M-S2 motherboard, showcasing the LGA 1151 CPU socket, two DDR4 DIMM slots, PCIe slots, SATA ports, and various headers.

Nøglefunktioner:

• CPU-kompatibilitet: Supports 8th and 9th Gen Intel Core i9/i7/i5/i3, Pentium, and Celeron processors (LGA 1151).
• Hukommelse: Dual-channel DDR4 architecture with 2 DIMM slots, supporting up to 32GB at 2666/2400/2133 MHz.
• Udvidelsespladser: 1x PCI Express x16 (PCIe 3.0) and 2x PCI Express x1 (PCIe 2.0).
• Opbevaring: 4x Serial ATA 6Gb/s interfaces and 1x M.2 slot.
• Lyd: Realtek ALC887 codec for 2/4/5.1/7.1 channel output.
• Netværk: Realtek LAN chip (10/100/1000 Mbit).
• Videooutput: D-Sub (VGA) port.

5. Opsætning og installation

Følg disse trin for korrekt installation af dit bundkort og komponenter.

5.1. CPU-installation

1. Find LGA 1151 CPU-sokkelen på bundkortet.
2. Tryk forsigtigt ned på belastningshåndtaget, og træk det til siden for at åbne CPU-soklens fastholdelsesramme.
3. Carefully align the notches on your Intel LGA 1151 CPU with the corresponding keys on the socket. Ensure the gold triangle on the CPU matches the triangle on the socket.
4. Place the CPU into the socket without forcing it. It should sit flat.
5. Luk fastholdelsesrammen, og skub læssehåndtaget tilbage i den låste position.

Billede: Nærbillede view of the LGA 1151 CPU socket with its retention mechanism and the two adjacent DDR4 memory slots.

5.2. Installation af hukommelse (RAM)

1. Find de to DDR4 DIMM-pladser.
2. Åbn klipsene i begge ender af DIMM-stikket.
3. Juster hakket på DDR4-hukommelsesmodulet med nøglen i DIMM-stikket.
4. Sæt hukommelsesmodulet godt ind i stikket, indtil klipsene klikker på plads. Sørg for, at begge klips er lukkede.

5.3. Storage Device Installation (M.2 and SATA)

5.3.1. Installation af M.2 SSD

1. Find M.2-slottet på bundkortet.
2. Fjern M.2-afstandsskruen.
3. Indsæt din M.2 SSD i stikket i en 30-graders vinkel.
4. Tryk forsigtigt M.2 SSD'en ned, og fastgør den med afstandsskruen.

5.3.2. Installation af SATA-drev

1. Connect one end of a SATA data cable to one of the four SATA 6Gb/s ports on the motherboard.
2. Tilslut den anden ende af SATA-datakablet til din SATA-harddisk eller SSD.
3. Tilslut et SATA-strømkabel fra din strømforsyning (PSU) til SATA-drevet.

Billede: Nærbillede view of the PCI Express x16 slot, PCI Express x1 slots, and the M.2 slot, indicating expansion and storage options.

5.4. Installation af udvidelseskort (PCIe)

1. Locate the desired PCI Express x16 or x1 slot.
2. Fjern dækslet til det tilsvarende udvidelsesstik fra computerens kabinet.
3. Align your expansion card (e.g., graphics card, sound card) with the slot and press it firmly until it is fully seated.
4. Fastgør kortet til kabinettet med en skrue.

5.5. Tilslutning af frontpanel og periferiudstyr

Connect the cables from your computer case (e.g., power button, reset button, USB ports, audio jacks, speaker) to the corresponding headers on the motherboard. Refer to the motherboard layout for exact header locations.

• Frontpaneloverskrift: For power button, reset button, HDD LED, power LED.
• Front Panel Audio Header: For front audio jacks.
• USB 3.1 Gen 1 Header: For front USB 3.0 ports.
• USB 2.0/1.1 Headers: For front USB 2.0 ports.

5.6. Strømtilslutning

1. Tilslut det 24-bens ATX-strømstik fra din strømforsyning til 24-bens strømstikket på bundkortet.
2. Connect the 4-pin ATX 12V power connector from your PSU to the 4-pin power socket near the CPU.
3. Connect the CPU fan to the CPU fan header and any system fans to the system fan headers.

6. Betjening

6.1. Første opstart

After completing all hardware installations, connect your monitor, keyboard, and mouse. Power on your computer. The system should boot up and display the BIOS/UEFI splash screen. If it does not, refer to the Troubleshooting section.

6.2. BIOS/UEFI-opsætning

To enter the BIOS/UEFI setup utility, press the designated key (usually DEL or F2) during the initial boot sequence. Within the BIOS/UEFI, you can configure system settings such as boot order, date/time, and hardware parameters. Save changes before exiting.

7. Vedligeholdelse

7.1. Rensning

Rengør regelmæssigt computerens indre for at forhindre støvophobning, som kan føre til overophedning. Brug trykluft til at fjerne støv fra ventilatorer, køleplader og bundkortkomponenter. Sørg for, at systemet er slukket og frakoblet, før du rengør det.

7.2. BIOS/UEFI-opdateringer

Kontroller jævnligt producentens website for updated BIOS/UEFI versions. Updating the BIOS/UEFI can improve system stability, compatibility, and performance. Follow the instructions provided by the manufacturer carefully when performing an update.

8. Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på.

8.1. Ingen strøm / Systemet tænder ikke

• Check if the power supply unit (PSU) is properly connected to the wall outlet and switched on.
• Ensure the 24-pin ATX and 4-pin ATX 12V power connectors are securely seated on the motherboard.
• Kontroller, at kablet til tænd/sluk-knappen på frontpanelet er korrekt tilsluttet bundkortets header.
• Test strømforsyningen med et andet system eller en strømforsyningstester, hvis tilgængelig.

8.2. Ingen skærmoutput

• Sørg for, at din skærm er tilsluttet den korrekte videoudgangsport (enten på bundkortet eller et dedikeret grafikkort).
• Check if the graphics card (if installed) is properly seated in its PCIe slot and has adequate power connected.
• Genindsæt RAM-modulerne. Forkert isat RAM er en almindelig årsag til manglende visning.
• Try booting with only one RAM module installed.

8.3. Systemustabilitet / Nedbrud

• Kontroller for overophedning. Sørg for, at CPU-køleren er korrekt installeret, og at blæserne drejer.
• Verify that all power connectors are secure.
• Kør hukommelsesdiagnosticeringsværktøjer for at kontrollere for defekt RAM.
• Ensure drivers for all components are up-to-date.

9. Specifikationer

10. Garanti og support

10.1. Garantioplysninger

This Bewinner H310M-S2 Motherboard comes with a manufacturer warranty for 90 days from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.

10.2. Teknisk support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Bewinner customer support through their official channels or the retailer where the product was purchased. You may find additional resources and driver downloads on the official Bewinner webwebsted.