1. Sikkerhedsoplysninger
Please read all safety instructions carefully before operating the helicopter to ensure safe use and prevent damage.
- Always operate the helicopter in an open area, away from people, animals, buildings, and power lines.
- Sørg for, at batteriet er fuldt opladet før hver flyvning.
- Flyv ikke i stærk vind eller ugunstige vejrforhold.
- Hold fingre og løstsiddende tøj væk fra roterende knive.
- Supervision by an adult is recommended for users under 12 years of age.
- Sluk helikopteren og fjernbetjeningen, når de ikke er i brug.
2. Pakkens indhold
Bekræft at alle varer er til stede i din pakke:
- 1x YU XIANG MD500 F119S Aircraft
- 1x brugsanvisning
- 1x Dedicated Balance Charger
- 5x Main Propeller Blades (Spares included)
- 1x Tail Propeller Blade (Spare included)
- 1x LI-POLY 11.1V (3500mAh) Smart Battery
- 1x 2.4G Smart Color Screen Remote Controller
3. Opsætning
3.1 Batteriinstallation og opladning
- Carefully open the battery compartment on the helicopter.
- Insert the LI-POLY 11.1V (3500mAh) Smart Battery, ensuring correct polarity.
- Luk batterirummet forsvarligt.
- To charge, connect the battery to the dedicated balance charger. Plug the charger into a power source. The charging indicator will show the charging status. Charging time is approximately 60 minutes.
3.2 Forberedelse af fjernbetjening
- Install the required batteries (not included) into the 2.4G Smart Color Screen Remote Controller.
- Tænd for fjernbetjeningen.
3.3 Parring af helikopter og fjernbetjening
- Place the helicopter on a flat, stable surface.
- Turn on the helicopter's power switch. The indicator lights will begin to flash.
- Within 10 seconds, turn on the remote control.
- Move the throttle stick (left stick) all the way up, then all the way down.
- The helicopter's indicator lights will become solid, indicating successful pairing.
4. Betjening
4.1 Grundlæggende flyvekontrol
Familiarize yourself with the remote control's functions:
- Gashåndtag (venstre greb op/ned): Styrer højden.
- Drej (venstre pind venstre/højre): Roterer helikopteren til venstre eller højre.
- Toneleje (højre pind op/ned): Bevæger helikopteren fremad eller bagud.
- Rul (højre pind venstre/højre): Vipper helikopteren til venstre eller højre for sidelæns bevægelse.
- Start/landing med én knap: Press the designated button for automated takeoff or landing.
4.2 Advanced Flight Modes (6G/3D Switchable)
The MD500 F119S offers versatile flight modes:
- 6G (Self-Stabilizing) Mode: Ideal for beginners, providing stable flight with automatic leveling. The helicopter maintains a horizontal attitude automatically.
- 3D (Acrobatic) Mode: For experienced pilots, allowing for advanced maneuvers and inverted flight. This mode disables automatic leveling for full control.
- Switch between modes using the dedicated button on the remote control.
4.3 GPS and Optical Flow Positioning
This helicopter features advanced positioning systems for enhanced stability and functionality:
- GPS-placering: Provides accurate outdoor positioning, enabling features like auto-return to home, waypoint flight, and precise hovering. Ensure a clear GPS signal before activating these functions.
- Optisk flowpositionering: Assists with stable hovering in indoor environments or where GPS signals are weak, by analyzing ground patterns.
4.4 Flight Demonstration Video
Video: A demonstration of the YU XIANG MD500 F119S RC Helicopter's flight capabilities, including takeoff, hovering, and maneuvers.
5. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer din helikopters levetid og optimale ydeevne.
- After each flight, inspect the main and tail rotor blades for any damage or cracks. Replace damaged blades immediately.
- Kontrollér alle skruer og forbindelser for at sikre, at de er stramme.
- Clean the helicopter body with a soft, dry cloth. Avoid using water or chemical cleaners.
- Store the helicopter and battery in a cool, dry place, away from direct sunlight and extreme temperatures.
- Do not overcharge or over-discharge the battery. Follow charging instructions carefully.
6. Fejlfinding
Se tabellen nedenfor for almindelige problemer og løsninger på disse:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Helikopteren reagerer ikke på fjernbetjeningen. | Not paired; low battery in helicopter or remote. | Re-pair the helicopter and remote; charge/replace batteries. |
| Helikopteren flyver uregelmæssigt eller er ustabil. | Damaged blades; strong wind; incorrect calibration. | Inspect/replace blades; fly in calm conditions; recalibrate as per manual. |
| Kort flyvetid. | Batteriet er ikke fuldt opladet; batteri er gammelt. | Ensure full charge; consider replacing the battery if it's old. |
| GPS-funktionerne virker ikke. | Weak GPS signal; indoor environment. | Operate outdoors with a clear sky; wait for sufficient satellite lock. |
7. Specifikationer
Detailed technical specifications for the YU XIANG MD500 F119S RC Helicopter:
| Feature | Detalje |
|---|---|
| Modelnavn | YU XIANG MD500 (F119S) |
| Skala | 1/16 |
| Materiale | High-Strength Composite Engineering Material |
| Rotor diameter | 430 mm |
| Drivmotor | 4306 560KV børsteløs motor |
| Tail Lock Motor | 1304 4400KV børsteløs motor |
| Fjernbetjening | 2.4G Smart Color Screen (9-Channel) |
| Fjernafstand | >350m |
| Kropsbatteri | LI-POLY 11.1V (3500mAh) Smart Battery, 25C |
| Opladningstid | Ca. 60 minutter |
| Brugstid | 15-18 minutter |
| Produktets vægt | 2650 g (5.84 lbs) |
| Produktdimensioner | 48.5 x 43 x 19.06 cm (19.09 x 16.93 x 7.5 tommer) |
| Anbefalet alder | 12 år og opefter |
8. Garanti og support
For warranty information, technical support, or replacement parts, please contact WOWOBONTOY customer service or refer to the official product page.
- Gem din købskvittering som købsbevis i tilfælde af garantikrav.
- For yderligere ressourcer og produktinformation, besøg WOWOBONTOY Store.