Generisk moderne minimalistisk kunstvæglampe (model O-JH7G3EF1054) brugsanvisning

Indledning

This manual provides comprehensive instructions for the safe installation, proper operation, and routine maintenance of your Generic Modern Minimalist Art Wall Light, Model O-JH7G3EF1054. This wall light features a postmodern design with natural marble and wrought iron materials, suitable for various indoor lighting applications. Please read this manual thoroughly before installation and retain it for future reference.

Sikkerhedsoplysninger

ADVARSEL: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation, servicing, or replacing bulbs. All wiring connections must be in accordance with local and national electrical codes. If you are not familiar with electrical wiring, consult a qualified electrician.

• Må ikke installeres i nærheden af ​​brandfarlige materialer.
• Ensure the mounting surface can safely support the weight of the fixture.
• Dette armatur er kun designet til indendørs brug.
• Overskrid ikke det maksimale wattage specificeret for pærerne.
• Handle marble components with care to prevent damage.

Pakkens indhold

Kontroller, at alle komponenter er til stede og ubeskadigede, før installationen påbegyndes.

• 1 x Væg Lamp Fixture (Marble and Wrought Iron)
• Mounting Hardware (screws, wall anchors, wire connectors)
• 2 x LED G4 Lamps
• 1 x brugsanvisning

Specifikationer

Opsætning og installation

Nødvendige værktøjer: Phillips head screwdriver, flathead screwdriver, wire strippers, drill, pencil, measuring tape, safety glasses.

1. Sluk for strømmen: Before starting, ensure the power supply to the installation area is completely turned off at the circuit breaker or fuse box.
2. Forbered monteringssted: Identify the desired location for the wall light. Use a pencil to mark the positions for the mounting screws based on the fixture's mounting bracket.
3. Bor pilothuller: Drill appropriate pilot holes for the wall anchors (if required for your wall type) and mounting screws. Insert wall anchors if necessary.
4. Fastgør monteringsbeslag: Fastgør monteringsbeslaget til væggen med de medfølgende skruer. Sørg for, at det er ordentligt fastgjort.
5. Ledningsforbindelser: Carefully connect the electrical wires from the wall to the fixture's wires. Match the wires:
   • Tilslut Live (sort) wire from the wall to the Levende armaturets ledning.
   • Tilslut Neutral (hvid) wire from the wall to the Neutral armaturets ledning.
   • Tilslut Formalet (grøn eller nøgen kobber) wire from the wall to the Jord armaturets ledning.
   Brug ledningsforbindelser til at fastgøre alle forbindelser. Sørg for, at ingen bare ledninger er blottet.
6. Sikker armatur: Carefully align the fixture with the mounting bracket and secure it in place using the provided screws. Ensure the fixture is flush against the wall and stable.
7. Installer pærer: Insert the two provided LED G4 lamps into their respective sockets within the fixture.
8. Gendan strøm: Once the fixture is securely installed and all connections are checked, restore power at the circuit breaker. Test the light using your wall switch.

Image: Dimensions of the wall light, showing its height of 35cm (13.7 inches) and width of 10cm (3.9 inches).

Betjeningsvejledning

Once properly installed and connected to a power source, the Generic Modern Minimalist Art Wall Light operates via your room's standard wall switch. Simply toggle the wall switch to turn the light on or off.

Opretholdelse

• Rensning: To clean the fixture, ensure the power is turned off at the circuit breaker. Use a soft, dry cloth to gently wipe the wrought iron and marble surfaces. For stubborn marks on marble, a slightly damp cloth with mild soap can be used, followed by immediate drying with a clean, soft cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and marble.
• Udskiftning af pære: If a bulb needs replacement, first turn off the power to the fixture at the circuit breaker. Carefully remove the old G4 bulb by pulling it straight out. Insert a new LED G4 bulb of the same type and wattage (max 40W) by pushing it gently into the socket. Restore power and test the light.

Billede: Detaljeret view of the wall light, showcasing the natural marble pattern and the metallic frame.

Fejlfinding

Garanti og support

For product support, warranty inquiries, or to report any issues, please contact the seller or manufacturer directly with your purchase details. Please refer to your purchase receipt for specific warranty terms and contact information.

Produktbilleder