1. Introduktion
The Lydsto R1 Edge is an intelligent robot vacuum and mop designed to provide comprehensive floor cleaning. Featuring advanced LDS laser navigation, a self-emptying base, and smart app control, it efficiently vacuums and mops various floor types, ensuring a clean home with minimal effort. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.
2. Hvad er der i æsken
Kontroller venligst indholdet af din pakke i forhold til listen nedenfor. Hvis der mangler eller er beskadigede dele, skal du kontakte kundesupport.
- Lydsto R1 Edge Robot Vacuum and Mop
- Self-Emptying Base with 2.5L Dust Bag
- Strømkabel
- Mop Pads (reusable)
- Humidity-Proof Mat
- Brugermanual
Image: Lydsto R1 Edge Robot Vacuum and Mop with its self-emptying base.
3. Opsætning
3.1 Placing the Self-Emptying Base
Place the self-emptying base on a flat, hard surface against a wall. Ensure there are no obstacles within 0.5 meters to either side and 1.5 meters in front of the base to allow the robot to dock properly. Keep the base away from heat sources, direct sunlight, and water. Attach the provided humidity-proof mat to the floor in front of the base to protect your flooring from moisture during mopping operations.
3.2 Indledende opladning
Connect the power cable to the self-emptying base and plug it into a wall outlet. Place the Lydsto R1 Edge robot onto the charging contacts of the base. Ensure the robot is properly aligned. The power indicator light on the robot will illuminate, indicating it is charging. For first-time use, fully charge the robot before operation.
3.3 Forbindelse til mobilappen
Download the Lydsto app from your smartphone's app store. Follow the in-app instructions to connect your robot to your home's 2.4 GHz Wi-Fi network. The app allows you to control the robot remotely, view cleaning routes, set virtual boundaries, schedule cleanings, and adjust suction power and water flow.
Image: Screenshot of the Lydsto app showing virtual limits and cleaning controls.
Image: The Lydsto app interface displaying map editing and route planning options.
4. Betjeningsvejledning
4.1 Rengøringstilstande
The Lydsto R1 Edge supports three cleaning modes: sweeping, mopping, and a combined sweep-mop mode. You can select the desired mode via the mobile app. The intelligent electronic water control system allows you to adjust the water flow for mopping based on your floor type, protecting delicate surfaces.
Image: Illustration of the Lydsto R1 Edge performing sweeping, mopping, and combined sweep-mop functions on different floor types.
4.2 Smart navigation og kortlægning
Equipped with LDS laser technology, the R1 Edge precisely maps your home, plans optimal cleaning routes, and ensures thorough coverage. It can quickly map rooms and manage multi-level floor plans. Use the app to define virtual walls and no-go zones to restrict cleaning areas.
Image: The Lydsto R1 Edge using LDS laser navigation to detect its surroundings and a virtual wall preventing it from entering a specific area.
Image: The Lydsto app showing smart map configuration with defined no-go zones and virtual walls.
4.3 Automatisk støvopsamling
The R1 Edge features an automatic dust collection system. After each cleaning cycle, the robot returns to its self-emptying base, which automatically transfers collected debris into a large 2.5-liter dust bag. This allows for up to 30-45 days of hands-free cleaning, reducing the frequency of manual dustbin emptying.
Image: The Lydsto R1 Edge robot docked at its self-emptying base, illustrating the automatic dust collection process into the 2.5L bag.
4.4 Batterilevetid og automatisk genopladning
The robot can operate continuously for up to 150 minutes on a normal suction setting, covering approximately 120 square meters. When the battery level is low, the robot will automatically return to its charging base. Once sufficiently charged, it will resume cleaning from where it left off (ensure the 'Resume Cleaning' option is enabled in the app).
Image: Diagram showing the Lydsto R1 Edge returning to its base for recharge when the battery is low and resuming cleaning once charged.
5. Vedligeholdelse
Regular maintenance ensures optimal performance and extends the lifespan of your Lydsto R1 Edge. Always turn off the robot and unplug the charging base before performing any maintenance.
5.1 Cleaning the Dustbin and HEPA Filter
- Åbn robottens topdæksel, og fjern støvbeholderen.
- Empty the dustbin contents into a trash can.
- Remove the HEPA filter from the dustbin. Tap it gently to remove loose debris. Do not wash the HEPA filter with water.
- Rinse the dustbin with water (ensure it is completely dry before reinserting).
- Reinstall the dry filter and dustbin.
5.2 Rengøring af hovedbørsten og sidebørsterne
- Flip the robot over. Remove the main brush cover and then the main brush.
- Use the cleaning tool (if provided) to cut and remove any hair or debris tangled around the brush.
- Remove the side brushes by unscrewing them. Clean any hair or debris.
- Sæt alle børster sikkert på igen.
5.3 Rengøring af moppepuden
- Fjern moppepuden fra vandtanken.
- Hand wash or machine wash the mop pad with mild detergent.
- Allow the mop pad to air dry completely before reattaching.
5.4 Rengøring af sensorer og opladningskontakter
- Wipe all sensors (cliff sensors, wall sensor, LDS sensor window) and charging contacts on both the robot and the base with a clean, dry cloth.
6. Fejlfinding
If you encounter issues with your Lydsto R1 Edge, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Robotten tænder ikke | Lavt batteri eller ikke opladet. | Placer robotten på opladningsbasen, og sørg for, at den er korrekt tilsluttet. Lad den oplade i flere timer. |
| Robotten kan ikke oprette forbindelse til Wi-Fi | Forkert Wi-Fi-adgangskode, 5 GHz-netværk eller dårligt signal. | Ensure you are using a 2.4GHz Wi-Fi network. Verify the password. Move the robot closer to the router. Reset Wi-Fi on the robot (refer to app instructions). |
| Robotten sidder ofte fast | Obstacles, loose cables, or uneven surfaces. | Clear the cleaning area of small objects, cables, and thick rugs. Use virtual walls in the app for problem areas. |
| Dårlig rengøringsydelse | Full dustbin, dirty filter/brushes, or low suction mode. | Empty the dustbin. Clean or replace the HEPA filter and brushes. Select a higher suction mode in the app. |
| Self-emptying base not working | Støvpose fuld eller tilstoppet. | Replace the dust bag in the self-emptying base. Check for any blockages in the dust collection channel. |
7. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Lydsto |
| Modelnavn | robot aspiradora y trapeador R1 (R1 Edge) |
| Overfladeanbefaling | Carpet, Tile, Wood, Marble |
| Særlige funktioner | Automatic shutdown, Self-emptying, Low noise level |
| Farve | Sort |
| Controller type | App kontrol |
| Filtertype | HEPA |
| Batterilevetid | 150 minutter |
| Rengøringsstiens bredde | 33 centimeter |
| Batterisammensætning | Lithium-metal |
| Strømkilde | El-ledning |
| Varedimensioner (L x B x H) | 33 x 10 x 33 centimeter |
| Anbefalede anvendelser | Floor cleaning, Remote control via app |
| Indendørs/Udendørs brug | Indendørs |
| UPC | 788362591397 |
8. Garanti og support
The Lydsto R1 Edge Robot Vacuum and Mop comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Lydsto customer service through their official webwebstedet eller kontaktoplysningerne i din produktdokumentation.