UltraPro 800 Series Z-Wave Dimmer

Indledning

This manual provides instructions for the installation, operation, and troubleshooting of your UltraPro 800 Series Z-Wave Dimmer (Model 76602). This in-wall smart dimmer is designed to control lighting through Z-Wave compatible hubs, offering both manual and smart home control capabilities.

The dimmer supports Z-Wave Plus Long Range technology for extended wireless communication and is compatible with various Z-Wave certified hubs, including those that integrate with Amazon Alexa and Google Assistant for voice control.

Sikkerhedsoplysninger

• RISIKO FOR ELEKTRISK STØD: Electricity can cause personal injury and property damage if handled improperly. Always turn OFF power at the circuit breaker or fuse box before installation.
• RISIKO FOR BRAND: Do not use to control an appliance that could present a hazardous condition when operated remotely or unattended.
• RISIKO FOR OVEROPHEDNING: Overskrid ikke de angivne elektriske klassificeringer.
• Installer i overensstemmelse med alle nationale og lokale elektriske koder.
• Hvis du er i tvivl om nogen del af disse instruktioner, skal du kontakte en kvalificeret elektriker.
• Kun til indendørs brug.

Funktioner

• Z-Wave Plus Long Range: Extends wireless range up to 1,300ft (400m) with compatible hubs. Backward compatible with Z-Wave Classic for up to 150ft range.
• Stemmestyring: Compatible with Amazon Alexa and Google Assistant when connected to a Z-Wave certified hub (e.g., SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, HomeSeer, Ezlo).
• QuickFit-design: Reduced housing depth (20% less) and elimination of heat tabs for easier installation in crowded electrical boxes.
• Multi-Switch Dimming: Supports single-pole or multi-switch configurations. Can be used with up to four UltraPro add-on switches for full dimming control from multiple locations, or one standard three-way switch for ON/OFF control.
• Customizable LED Indicator: Features eight colors and four operation modes for personalization.
• Direct 3-Way Wiring: Allows for 3-way setup without an add-on switch, provided a hot line is present at both switch locations.

Billede: Overview of UltraPro Z-Wave Dimmer features including Z-Wave Plus LR, mobile/voice control, dimming, and scheduling.

Installation (Opsætning)

Before beginning, ensure the power is OFF at the circuit breaker. This device is designed for use with permanently installed fixtures only. Do not use with portable lamps.

Ledningskrav:

• Neutral ledning påkrævet.
• Ground wire required.
• For 3-way installations without an add-on switch, a hot line must be present at both switch locations. If this is not the case, an UltraPro add-on switch is required for multi-location control.
• Color-coded flying leads are provided for wiring. Use wire nuts to secure connections.

Installationstrin:

1. Turn OFF Power: Find den afbryder, der styrer den kontakt, du udskifter, og sluk den. Kontroller, at strømmen er slukket med en lydstyrkemåler.tage tester.
2. Fjern den gamle switch: Carefully remove the existing wall plate and switch. Disconnect the wires from the old switch.
3. Identificér ledninger: Identify the LINE (hot), LOAD, NEUTRAL, and GROUND wires. If you are unsure, consult a qualified electrician.
4. Tilslutning af lysdæmperen: Connect the UltraPro dimmer wires to your home's wiring using wire nuts according to the diagram below.
   • Black wire (LINE) to the incoming hot wire.
   • Red wire (LOAD) to the wire going to the light fixture.
   • White wire (NEUTRAL) to the neutral bundle.
   • Green wire (GROUND) to the bare copper or green ground wire.
   • Yellow wire (TRAVELER) for 3-way applications (connect to the traveler wire from the other switch location).
5. Monter lysdæmperen: Carefully tuck all wires into the electrical box. Secure the dimmer to the electrical box using the provided screws.
6. Installer vægplade: Attach the new wall plate (sold separately) over the dimmer.
7. Gendan strøm: Tænd for strømmen ved afbryderen.

Ledningsdiagram:

Billede: Detaljeret view of the UltraPro Z-Wave Dimmer showing wiring leads, dimensions (1.69in W x 4.14in H x 1.13in D housing depth), and Z-Wave DSK.

The QuickFit design reduces housing depth to 1.13 inches, making it easier to fit into standard electrical boxes. The dimmer uses flying leads instead of screw terminals, which may require additional wire nuts for connections.

Operation

Manuel kontrol:

• TIL/FRA: Press the top of the rocker switch to turn the connected light ON. Press the bottom of the rocker switch to turn the connected light OFF.
• Dæmpning: Press and hold the top of the rocker switch to increase brightness. Press and hold the bottom of the rocker switch to decrease brightness. Release the switch when the desired brightness level is reached.

Smart kontrol:

Once successfully paired with a Z-Wave hub, you can control the dimmer remotely via your hub's app, set schedules, and integrate with voice assistants like Amazon Alexa and Google Home.

Image: A family interacting with smart home devices, demonstrating voice control functionality with "Dim lights to 75%" via Alexa and Google Home.

Image: A man using a smartphone to schedule and control lights remotely, with a house illuminated in the background, illustrating smart home capabilities.

Z-Wave inklusion/eksklusion

Follow your Z-Wave hub's instructions for adding or removing devices. The process typically involves putting your hub into inclusion/exclusion mode and then performing an action on the dimmer.

To Add (Include) the Dimmer:

1. Place your Z-Wave controller into inclusion mode.
2. Press the top or bottom of the dimmer's rocker switch once. The LED indicator will flash to confirm inclusion mode.
3. The controller will confirm successful inclusion.

To Remove (Exclude) the Dimmer:

1. Place your Z-Wave controller into exclusion mode.
2. Press the top or bottom of the dimmer's rocker switch once. The LED indicator will flash to confirm exclusion mode.
3. Controlleren vil bekræfte den vellykkede udelukkelse.

Billede: Forside view of the UltraPro Z-Wave Dimmer, highlighting the Z-Wave DSK (Device Specific Key) and PIN for secure inclusion.

Avancerede funktioner

Tilpasning af LED-indikator:

The dimmer features a customizable LED indicator. Refer to your Z-Wave hub's documentation or the UltraPro support website for specific instructions on how to change the LED color (eight options) and operation mode (four options).

Multi-Switch Dimming:

For multi-location control with full dimming functionality, pair the 76602 dimmer with up to four UltraPro add-on switches. For basic ON/OFF control from a second location, a standard three-way switch can be used. Ensure proper wiring as described in the installation section.

Opretholdelse

The UltraPro Z-Wave Dimmer requires minimal maintenance. To clean, gently wipe the surface with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.

Fejlfinding

• Light does not turn ON/OFF or dim:
  • Sørg for, at strømmen er tændt på afbryderen.
  • Check all wire connections for security and proper alignment according to the wiring diagram.
  • Verify the bulb is functional and compatible with dimmers.
  • Ensure the dimmer is not overloaded (check wattage specifikationer).
• Dimmer cannot be included/excluded from Z-Wave network:
  • Ensure your Z-Wave hub is in inclusion/exclusion mode.
  • Try moving the dimmer closer to the hub during the pairing process.
  • Perform a factory reset on the dimmer (refer to UltraPro support for specific steps, usually involves a sequence of button presses).
  • If previously included, try excluding it first, then re-including.
• 3-Way setup not working as expected:
  • Confirm that a hot line is present at both switch locations if attempting a direct 3-way setup without an add-on switch.
  • Verify traveler wire connections are correct.
  • If using an add-on switch, ensure it is a compatible UltraPro add-on switch and wired correctly.

Specifikationer

Garanti og support

UltraPro products are backed by a limited warranty. For detailed warranty information, product support, or to contact customer service, please visit the official UltraPro webwebstedet eller se de kontaktoplysninger, der blev oplyst ved dit køb.

Online support: www.ultrapro.com/support (Eksamplinket, det faktiske link er ikke angivet i inputtet)

Fabrikant: Jasco Products Company, LLC