Growell Large Hydroponics Growing System Kit

Indledning

Thank you for choosing the Growell Large Hydroponics Growing System Kit. This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your indoor hydroponic garden. Please read these instructions carefully before use to ensure optimal performance and longevity of your system.

Opsætning

Follow these steps to assemble your Growell Hydroponics Growing System Kit:

1. Udpak komponenter: Carefully remove all components from the packaging. Verify that all parts listed in the 'All-in-One Grow Anything Kit' image are present.
2. Monter hjul: Attach the four lockable wheels to the bottom of the base water tank. Ensure they are securely fastened.
3. Saml støttestænger: Insert the aluminum support poles into the designated slots on the base water tank. Use the provided hammer to gently tap them into place if needed.
4. Fastgør bakker: Slide the first growing tray onto the support poles. Ensure it clicks securely into position. Repeat for the second tray.
5. Installer håndtag: Clip the grow deck handles into the designated slots on the sides of each growing tray. These handles allow for easy lifting and adjustment.
6. Mount LED Grow Lights: Attach the LED grow light panels to the grow light clips on each tier. Ensure the control panel faces outwards. These panels are height-adjustable.
7. Tilslut ledninger: Connect the pump wires from each water tank to the corresponding ports on the underside of the LED grow light panels. Use the jumper cable to connect the two LED panels. Finally, connect the main power cable to the central port on the top LED panel.
8. Insert Water Level Floats: Assemble the water level indicators and insert one into each growing tray.
9. Prepare Growing Pods: Soak the grow sponges in water for 5 minutes. Soak your seeds for at least 6 hours. Insert a soaked sponge into each grow basket, then place 2-3 seeds into the hole of each sponge. Place the grow baskets into the holes on the growing trays. Cover unused holes with the provided caps.
10. Add Water and Nutrients: Fill each water tank with purified water up to the 'MAX' line on the water level indicator (14L per tank). Refer to the nutrient solution table in the 'Operating' section for precise measurements of Plant Food A and B.

Figur 1: Unboxing the Growell Hydroponics Kit components.

Figur 2: All components included in the Growell kit for a complete setup.

Figur 3: Step-by-step assembly of the hydroponics system frame.

Figur 4: Attaching the growing trays and LED light panels.

Betjeningsvejledning

Your Growell system features smart controls for optimal plant growth:

• Power knap: Tryk for at tænde/slukke systemet.
• Pumpe knap: Activates the independent water pumps for each tier. The pumps run for 30 minutes on and 30 minutes off in a continuous cycle.
• Tidsknap: Adjusts the lighting duration. Options typically include 12, 14, or 16 hours of light followed by a period of darkness.
• Sove mode: Turns off all lights and pumps for a set duration, allowing plants to rest.
• Grøntsagstilstand: Provides a full-spectrum light optimized for leafy greens and herbs.
• Blomster og frugter-tilstand: Provides a light spectrum optimized for flowering and fruiting plants.

Nutrient Solution Table:

Note: Adjust nutrient solution based on the volume of water in your tank. The 2-tier system has two 14L tanks.

Figur 5: Smart LCD touch control panel with various light and pump modes.

Figur 6: Water level indicator for easy monitoring of water volume.

Opretholdelse

Regular maintenance ensures a thriving hydroponic garden:

• Vandpåfyldning: Monitor the water level indicator daily. Refill with purified water as needed.
• Næringsstofopfyldning: Replenish nutrient solution weekly according to the table in the 'Operating' section.
• System rengøring: The detachable design allows for easy cleaning. Periodically clean the water tanks and components to prevent algae buildup and ensure optimal pump function.
• Adjust Grow Light Height: As plants grow, adjust the height of the LED grow light panels to maintain optimal distance for growth.

Figur 7: Adjusting the height of the LED grow lights as plants grow.

Figur 8: Lifting handle for easy access to the growing tray and water tank.

Fejlfinding

• Pumpen virker ikke: Ensure all power connections are secure and the pump button on the control panel is activated. Check for any obstructions in the pump or tubing.
• Water Level Drops Quickly: As plants mature, they consume more water. This is normal. Refill the tank as indicated by the water level float.
• Slow Growth: Verify that the correct light mode (Vegetables or Flowers & Fruits) is selected for your plants. Ensure nutrient levels are adequate and the water is clean.
• Algevækst: Ensure unused planting holes are covered to block light from the water, which can promote algae. Regularly clean the system.

Specifikationer

Garanti & Support

Growell offers a 30-day refund/replacement policy for this product. For any questions, concerns, or support, please contact us:

• E-mail: support@growellshop.com
• WhatsApp: 1-(646) 642-0715