1. Produktet er slutview
The USX MOUNT XTL908 is a heavy-duty tilting TV wall mount designed for large televisions ranging from 60 to 120 inches. It supports TVs weighing up to 220 lbs and features a low-profile design, positioning the TV just 2.6 inches from the wall. The mount is compatible with VESA patterns up to 900x600mm and can be installed on wood studs (16-32 inches apart), concrete, or brick walls.
Image 1.1: The USX MOUNT XTL908 TV Wall Mount installed in a modern living room setting.
Image 1.2: The ultra-slim profile of the mount, showing the TV positioned close to the wall.
2. Sikkerhedsoplysninger
Read all instructions carefully before installation. If you have any questions, consult a qualified installer. Improper installation can result in serious injury or damage.
- Vægt kapacitet: Overskrid ikke den maksimale vægtkapacitet på 100 kg. Denne montering er kun beregnet til brug med de angivne maksimale vægte.
- TV størrelse: Dette beslag er designet til tv'er mellem 60 og 120 tommer.
- Vægtype: Install only on wood studs, solid concrete, or brick walls. GØR IKKE install on drywall alone.
- Stud Spacing: Ensure wood studs are spaced between 16 and 32 inches apart.
- Monteringshardware: Use only the provided mounting hardware. If you require concrete anchors, please contact customer support.
- Integrity Test: After installation, perform an integrity test by gently pulling on the mount to ensure it is securely fastened to the wall.
Image 2.1: The robust construction of the mount, designed to securely hold TVs up to 220 lbs.
3. Pakkens indhold
Please verify that all components are present and undamaged before installation. If any parts are missing or defective, contact customer support.
- Vægplademontering
- Tv-beslag (2)
- Mounting Hardware Kit (screws, washers, spacers, anchors for concrete/brick)
- Monteringsskabelon
- Instruktionsmanual
4. Specifikationer
| Feature | Specifikation |
|---|---|
| Monteringstype | Vægmontering |
| Bevægelsestype | Tilt |
| Mærke | USX-montering |
| Materiale | Metal |
| Farve | Sort |
| Kompatible enheder | Television |
| Maksimal hældningsvinkel | 12 Degrees Down, 5 Degrees Up |
| Minimum Supported Screen Size | 60 tommer |
| Maximum Supported Screen Size | 120 tommer |
| Max belastningskapacitet | 220 lbs (100 kg) |
| VESA-kompatibilitet | Op til 900x600 mm |
| Vægafstand (lav pro)file) | 2.6 tommer |
| Stud Spacing Compatibility | 16-32 tommer |
Image 4.1: Visual representation of VESA patterns supported and the maximum load capacity of 220 lbs.
Image 4.2: Technical drawing showing the dimensions of the TV interface and wall plate.
Billede 4.3: Endnu en view of the product dimensions, highlighting key measurements.
5. Opsætning og installation
Before you begin, ensure you have all necessary tools and that your wall type is suitable for this mount. The installation video below provides a visual guide.
Video 5.1: Official USX MOUNT XTL908 installation video, demonstrating the step-by-step mounting process.
5.1 Kontrol før installation
- Bekræft tv-kompatibilitet: Check your TV's weight and VESA mounting pattern to ensure it falls within the mount's specifications (60-120 inches, up to 220 lbs, VESA up to 900x600mm).
- Identificer vægtype: Determine if your wall is wood stud, solid concrete, or brick.
Image 5.2: The mount is suitable for wood studs (16-32" spacing), solid concrete, and brick walls. Not for drywall alone.
5.2 Montering af tv-beslag
Depending on your TV's back, choose the appropriate option:
- For Flat TV Back: Align the TV brackets with the VESA holes on the back of your TV. Secure them using the appropriate screws and washers from the hardware kit. Do not overtighten.
- For Irregular TV Back: If your TV has an irregular or curved back, use the provided spacers to create a flat mounting surface before attaching the brackets.
5.3 Montering af vægpladen
Use the provided mounting template to mark the drill holes on your wall. Ensure the template is level before marking.
- Til træstolper: Locate the center of your wood studs. Drill pilot holes (7/32 in. / 5.5mm diameter, 2.5 in. / 64mm depth). Secure the wall plate using lag bolts and washers. Do not use plastic anchors for wood studs.
- Til beton-/murstensvægge: Drill pilot holes (3/8 in. / 10mm diameter, 2.5 in. / 64mm depth). Insert concrete anchors into the drilled holes. Secure the wall plate using lag bolts and washers.
After securing the wall plate, perform an integrity test by pulling on the mount to ensure it is firmly attached to the wall.
Image 5.3: Simplified 3-step installation process: 1. Attach TV brackets, 2. Mount wall plate, 3. Hang up TV.
5.4 Hanging and Securing the TV
- Carefully lift the TV with the attached brackets and hook them onto the top edge of the wall plate.
- Sænk forsigtigt tv'et, indtil beslagene går helt i indgreb med vægpladen.
- Use the quick lock and release pull tabs to secure the TV to the wall plate, preventing accidental dislodgement.
6. Betjeningsvejledning
6.1 Justering af hældningsvinkel
The USX MOUNT XTL908 allows for easy tilt adjustment to optimize your viewing angle and reduce glare. The mount can tilt 5 degrees upwards and 12 degrees downwards.
- To adjust the tilt, loosen the tilting adjustment knobs located on the TV brackets.
- Vip tv'et til den ønskede vinkel.
- Tighten the tilting adjustment knobs to secure the TV in place.
Image 6.1: The tilt function allows for easy adjustment up to +5° and down to -12° to reduce glare.
Image 6.2: The mount's tilt range for optimal viewfra forskellige positioner.
6.2 Quick Lock and Release
The mount features pull tabs for easy locking and releasing of the TV from the wall plate.
- Til låse the TV, ensure the pull tabs are pushed upwards into the locked position after hanging the TV.
- Til frigøre the TV, gently pull down on the cords attached to the tabs. This will unlock the TV from the wall plate, allowing you to lift it off.
Image 6.3: The adjustable pull tabs for easy locking and releasing of the TV.
Image 6.4: Illustration of pulling the cords to release the TV from the mount.
7. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer levetiden og sikker drift af dit TV-vægbeslag.
- Rensning: Tør holderen af med en blød, tør klud for at fjerne støv. Undgå slibende rengøringsmidler eller opløsningsmidler.
- Periodiske kontroller: Periodically check all screws and bolts to ensure they are tight and secure. Re-tighten if necessary.
- Undersøg for skader: Inspect the mount for any signs of wear, corrosion, or damage. If any issues are found, contact customer support and do not use the mount until it is repaired or replaced.
8. Fejlfinding
If you encounter any issues during or after installation, refer to the following common problems and solutions.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| TV'et er ikke i vater | Vægpladen er ikke i vater under installationen. | Remove TV, loosen wall plate screws, adjust level, re-tighten. Ensure to use a level during installation. |
| Mount feels loose on the wall | Screws not fully tightened; incorrect wall anchors used; wall material not suitable. | Ensure all lag bolts are fully tightened. Verify correct anchors for concrete/brick. Do not install on drywall alone. If issues persist, consult a professional. |
| TV cannot be tilted | Tilting adjustment knobs are too tight. | Loosen the tilting adjustment knobs on the TV brackets to allow movement. Re-tighten once desired angle is achieved. |
| TV cannot be removed from mount | Quick release pull tabs are in the locked position. | Pull down on the cords attached to the quick release tabs to unlock the TV. |
9. Garanti og support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official USX MOUNT webwebsted. Gem din købskvittering som købsbevis i tilfælde af garantikrav.
If you have any questions or require additional assistance, please do not hesitate to contact USX MOUNT customer service.