Generic XY6509X CNC DC Adjustable Buck-Boost Module User Manual

1. Introduktion

This manual provides detailed instructions for the safe and effective operation of the Generic XY6509X CNC DC Adjustable Buck-Boost Module. This device functions as a laboratory power supply, offering constant voltage and constant current output, and is suitable for various applications including solar charging. It features a digital display for precise control and monitoring of output parameters.

Figur 1: Front view of the Generic XY6509X CNC DC Adjustable Buck-Boost Module. It features a digital display showing voltage, current, and power, along with control buttons and a rotary encoder.

2. Sikkerhedsoplysninger

Læs og forstå alle sikkerhedsadvarsler og betjeningsvejledninger, inden du bruger dette produkt. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller alvorlig personskade.

• Elektrisk sikkerhed: This module operates with DC voltage. Ensure all connections are made correctly and securely before applying power. Do not exceed the specified input or output voltage/nuværende vurderinger.
• Ventilation: Ensure adequate ventilation around the module during operation to prevent overheating. The module includes a cooling fan; ensure it is not obstructed.
• Miljø: Do not operate the module in wet or damp conditions, or in environments with flammable gases or vapors.
• Kvalificeret personale: Installation and operation should ideally be performed by individuals familiar with electronic circuits and power supplies.
• Demontering: Do not attempt to disassemble or modify the module. Refer all servicing to qualified personnel.

3. Opsætning

3.1 Fysisk installation

The module is designed for integration into a system or enclosure. Consider its dimensions for proper fit and ventilation.

Figur 2: Dimensions of the XY6509X module. The front panel measures approximately 86mm wide by 50mm high, with the display area being 38mm wide by 29mm high.

3.2 Ledningsforbindelser

Connect the input power source and the load to the designated terminals on the back of the module. Ensure correct polarity (positive to positive, negative to negative).

• Indgangsterminaler: Connect your DC power source (e.g., battery, power adapter) to the input terminals.
• Udgangsterminaler: Connect your load (e.g., circuit, device to be charged) to the output terminals.

Figur 3: Indre view of the module showing the input/output screw terminals, inductor, capacitors, and cooling fan. Ensure secure connections to these terminals.

3.3 Indledende opstart

After all connections are secure, apply power to the input terminals. The display should illuminate, showing the current settings or output status.

4. Betjeningsvejledning

The XY6509X module features a user-friendly interface with a digital display, buttons, and a rotary encoder for precise control.

Figur 4: Front panel of the module, illustrating the layout of the V-SET, SW, I-SET buttons, the ON/OFF button, and the rotary encoder.

4.1 Display overview

The digital display shows real-time output voltage (V), output current (A), and output power (W). It also indicates the Constant Voltage (CV) or Constant Current (CC) operating mode.

4.2 Setting Output Voltage (V-SET)

1. Tryk på V-SET knappen. Lydstyrkentage display will start blinking.
2. Rotate the encoder knob to adjust the desired output voltage. Turning clockwise increases the value, counter-clockwise decreases it.
3. Tryk på V-SET button again to confirm the setting and exit voltage justeringstilstand.

4.3 Setting Output Current Limit (I-SET)

1. Tryk på I-SET button. The current display will start blinking.
2. Rotate the encoder knob to adjust the desired output current limit. This sets the maximum current the module will supply.
3. Tryk på I-SET button again to confirm the setting and exit current adjustment mode.

4.4 Output ON/OFF Control

Tryk på ON/OFF button to toggle the output power. When the output is OFF, the display will still show the set voltage and current, but no power will be delivered to the load.

4.5 Display Switching (SW)

Tryk på SW button to cycle through different display modes, if available (e.g., input voltage, output power, energy consumed, etc.). Refer to the on-screen indicators for specific display information.

4.6 Encoder Knob Functionality

The rotary encoder is primarily used for adjusting values when in V-SET or I-SET modes. It may also have a push function for confirming selections or navigating menus, depending on the firmware version.

5. Vedligeholdelse

• Rensning: Keep the module clean and free from dust. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Ventilation: Periodically check that the cooling fan and ventilation openings are not obstructed by dust or debris.
• Forbindelser: Ensure all wiring connections remain tight and secure. Loose connections can lead to poor performance or damage.

6. Fejlfinding

7. Specifikationer

• Model: XY6509X (PRWCFLAJZ)
• Type: CNC DC Adjustable Buck-Boost Module
• Maksimal output voltage: 65V
• Maksimal udgangsstrøm: 9A
• Maksimal udgangseffekt: 585W
• Fabrikant: Generisk
• Varemodelnummer: PRWCFLAJZ
• Pakkedimensioner: 0.39 x 0.39 x 0.39 tommer
• Varens vægt: 1.76 ounce

8. Garanti og support

Information regarding product warranty and customer support was not provided in the available product details. Please refer to your purchase documentation or contact the seller directly for warranty claims or technical assistance.