MLOVE E90 Bluetooth Speaker User Manual

Indledning

Thank you for choosing the MLOVE E90 Bluetooth Speaker. This manual provides detailed instructions for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. Please read this manual thoroughly before using the product and retain it for future reference.

Produkt overview

Hvad er der i æsken

• MLOVE E90 Bluetooth Speaker
• USB-C ladekabel
• Skulderrem
• Hurtig startvejledning

Nøglefunktioner

• 80W Powerful Stereo Sound: Delivers robust audio output for an immersive listening experience.
• Dynamisk RGB-belysning: Features customizable RGB lights that sync with music, enhancing the ambiance.
• IP65 Støvtæt og vandtæt: Designed for outdoor use, resistant to dust and water splashes.
• True Wireless Stereo (TWS) funktion: Allows pairing two E90 speakers for enhanced stereo sound.
• Flere afspilningstilstande: Supports Bluetooth, AUX-in, USB drive, and MicroSD card playback.
• Lang batterilevetid: Equipped with a large capacity battery for extended playtime.
• Bærbart design: Includes a shoulder strap for easy transport.

Image: Internal components of the MLOVE E90 speaker, highlighting its 80W peak power output, 5-unit acoustic configuration, including two 33mm dome tweeters, two 111mm bass radiators, and a 90x120mm oval mid-bass driver.

Image: The MLOVE E90 speaker illustrating its powerful battery life, emphasizing its large capacity and Type-C quick charge capability for uninterrupted listening.

Image: The MLOVE E90 speaker shown with water splashing around it, highlighting its IP65 dustproof and waterproof rating, making it suitable for various outdoor environments and temperatures from -10°C to 45°C.

Opsætningsvejledning

1. Opladning af højttaleren

1. Locate the USB-C charging port, usually protected by a rubber flap on the back or side of the speaker.
2. Tilslut det medfølgende USB-C-kabel til højttalerens opladningsport.
3. Tilslut den anden ende af USB-C-kablet til en kompatibel USB-strømadapter (medfølger ikke) eller en computers USB-port.
4. The charging indicator lights will illuminate, typically showing charging progress. A full charge may take approximately 4.5 hours with a 3A charger.
5. Once fully charged, disconnect the charging cable and ensure the rubber flap is securely closed to maintain water resistance.

2. Tænd/sluk

• For at tænde: Press and hold the Power button for a few seconds until you hear an audible prompt or see the indicator lights activate.
• For at slukke: Press and hold the Power button again for a few seconds until you hear an audible prompt or the indicator lights turn off.

3. Bluetooth-parring

1. Ensure the speaker is powered on and in Bluetooth pairing mode. The Bluetooth indicator light will typically flash.
2. Aktiver Bluetooth på din enhed (smartphone, tablet, computer) og søg efter tilgængelige enheder.
3. Select "MLOVE E90" from the list of found devices.
4. Once paired, the speaker will emit an audible confirmation, and the Bluetooth indicator light will become solid.
5. The speaker supports Bluetooth 5.4 for stable and efficient connection.

Image: The MLOVE E90 speaker demonstrating its ability to connect to two devices simultaneously (e.g., a smartphone and a tablet) with seamless switching, utilizing Bluetooth 5.4 for stable playback.

4. Ægte trådløs stereo (TWS) parring

To achieve a true stereo sound experience, you can pair two MLOVE E90 speakers together.

1. Ensure both MLOVE E90 speakers are powered on and not connected to any Bluetooth device.
2. On one speaker (this will be the primary speaker), press the TWS button (refer to your Quick Start Guide for button location). The TWS indicator light will flash.
3. Den primære højttaler søger automatisk efter den sekundære højttaler.
4. Once connected, both speakers will emit an audible confirmation, and the TWS indicator lights will become solid.
5. Tilslut nu din enhed til den primære højttaler via Bluetooth som beskrevet i trin 3. Lyden afspilles i stereo gennem begge højttalere.

Image: Two MLOVE E90 speakers shown wirelessly connected, demonstrating the True Wireless Stereo (TWS) function which allows them to play audio in synchronized stereo for an enhanced listening experience.

Betjeningsvejledning

Grundlæggende kontrol

• Power knap: Tryk og hold for at tænde/slukke.
• Afspil/pause knap: Tryk én gang for at afspille eller sætte musik på pause.
• Lydstyrke op (+): Press once to increase volume. Press and hold to skip to the next track.
• Skrue ned for lyden (-): Press once to decrease volume. Press and hold to skip to the previous track.
• Mode-knap (M): Press to switch between playback modes (Bluetooth, AUX, USB, MicroSD).
• Lys knap: Press to cycle through RGB light modes. Press and hold to turn lights off/on.
• Basforstærkningsknap: Press to activate/deactivate enhanced bass.

RGB-lystilstande

The MLOVE E90 features dynamic RGB lighting with 16.8 million colors. Use the Light button to cycle through various modes, including beat-sync and dynamic flowing light effects. Press and hold the Light button to turn the lights off or on.

Image: The MLOVE E90 speaker displaying its dynamic RGB and strobe lights in an outdoor party setting, illustrating features like 16.8 million colors, aircraft strobe light effects, beat synchronization, and dynamic flowing light patterns.

Flere afspilningstilstande

Højttaleren understøtter forskellige lydinputmetoder:

• Bluetooth 5.4: Wireless connection to compatible devices.
• AUX-indgang: Tilslut eksterne lydenheder med et 3.5 mm lydkabel (medfølger ikke).
• USB Playing: Indsæt et USB-flashdrev med lyd files (WAV, WMA, MP3 formats supported).
• MicroSD Card Playing: Insert a MicroSD card with audio files (WAV, WMA, MP3 formats supported).

Use the Mode button to switch between these input sources. The speaker will automatically detect and switch to an inserted USB drive or MicroSD card.

Image: The MLOVE E90 speaker displaying its connectivity panel with ports for USB-C charging, USB-A for playing music from a USB drive and power bank functionality, and a 3.5mm AUX-in port, alongside icons for Bluetooth 5.4, AUX-in, USB Playing, and Lossless Music Playing.

Opretholdelse

Rensning

• Tør højttaleren af ​​med en blød, damp klæde.
• Brug ikke slibende rengøringsmidler, alkohol eller kemiske opløsningsmidler, da disse kan beskadige overfladen.
• Ensure all port covers are securely closed before cleaning with a damp klæde.

Vandtæthed (IP65)

• The MLOVE E90 is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction.
• This speaker is suitable for use in light rain or near water, but it should not be submerged in water.
• Always ensure the rubber flap covering the charging and input ports is securely closed to maintain water resistance.
• Do not expose the speaker to saltwater or other corrosive liquids. If exposed, rinse with fresh water and dry thoroughly.

Opbevaring

• Opbevar højttaleren et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• If storing for an extended period, charge the battery to approximately 50% every few months to preserve battery health.

Fejlfinding

Specifikationer

Garanti og support

The MLOVE E90 Bluetooth Speaker comes with a 2 års begrænset producentgaranti fra købsdatoen. Denne garanti dækker fabrikationsfejl og udførelse under normal brug.

Garantien dækker ikke skader forårsaget af misbrug, ulykker, uautoriserede ændringer eller normal slitage. Gem venligst din købsbevis i tilfælde af garantikrav.

Kundesupport

For technical assistance, warranty claims, or any questions regarding your MLOVE E90 speaker, please contact our customer support team. Refer to the contact information provided in your Quick Start Guide or on the official MLOVE webwebsted.

Note: Specific contact details may vary by region.