1. Introduktion
This manual provides essential information for the proper use and maintenance of your ZWP Replacement Remote Control. This remote is designed to be compatible with JOWLURK M7, OWNKNEW GC357, and HORLAT T10PRO Projectors, offering a direct replacement solution without the need for complex programming.
Image 1.1: The ZWP Replacement Remote Control is built for durability, featuring a long lifespan, advanced internal chip, construction from ABS safety materials, and quality assurance.
Image 1.2: The remote control offers a stable link, fast response time of 0.2 seconds, an ergonomic design for easy grip and control, and power-saving capabilities.
2. Opsætning
2.1 Batteriinstallation
The remote control requires two (2) AAA batteries for operation. Batteries are not included with the product. Follow these steps to install the batteries:
- Find batterirummets dæksel på bagsiden af fjernbetjeningen.
- Skub dækslet nedad, eller tryk på låsen (hvis den er monteret) for at åbne rummet.
- Isæt to AAA-batterier, og sørg for, at de positive (+) og negative (-) poler er justeret korrekt med markeringerne inde i batterirummet.
- Sæt batteridækslet på igen ved at skubbe det på plads, indtil det klikker sikkert.
Image 2.1: The remote control requires two AAA batteries, which are not included. Ensure correct polarity when inserting.
2.2 Compatibility and Initial Use
This ZWP Replacement Remote Control is designed for direct use with the following projector models:
- JOWLURK M7 Projector
- OWNKNEW GC357 Projector
- HORLAT T10PRO Projector
No programming or setup is required. Once batteries are correctly installed, the remote control is ready for immediate use with your compatible projector.
Image 2.2: The remote control is perfectly compatible with specified projector models and requires no setup.
3. Betjeningsvejledning
3.1 Knapfunktioner
The remote control features a standard layout for intuitive operation. Refer to the image below for a visual guide to the buttons:
Billede 3.1: Overview af fjernbetjeningens knapper.
- Tænd/sluk-knap (⏻): Tænder eller slukker for projektoren.
- OK knap: Bekræfter valg eller åbner menuer.
- Navigationsknapper (op, ned, venstre, højre): Navigerer gennem menuer og muligheder.
- Volume Up (F+): Øger lydstyrken.
- Volume Down (F-): Sænker lydstyrken.
- Mute knap (🔇): Slår lyden til eller fra.
- Menu-knap (☰): Giver adgang til projektorens hovedmenu.
- Hjemknappen (⌂): Returns to the home screen or main interface.
- Return/Back Button (↶): Går tilbage til den forrige skærm eller menu.
3.2 Operating Range and Angle
The remote control operates using infrared (IR) technology. For optimal performance, ensure a clear line of sight between the remote control and the projector's IR receiver. The remote offers:
- Maksimal rækkevidde: Up to 10 meters (approximately 33 feet).
- Multi-Angle Induction: Effective operation within a 120-degree angle from the projector's IR receiver.
Image 3.2: The remote control supports multi-angle operation up to 120 degrees and has an effective range of up to 40 feet (approximately 12 meters).
4. Vedligeholdelse
4.1 Rengøring
Sådan bevarer du fjernbetjeningens udseende og funktionalitet:
- Tør overfladen af med en blød, tør klud.
- For genstridigt snavs, let dampda kluden med vand eller et mildt, ikke-slibende rengøringsmiddel.
- Undgå at bruge skrappe kemikalier, opløsningsmidler eller slibende materialer, da disse kan beskadige fjernbetjeningens overflade eller interne komponenter.
4.2 Udskiftning af batteri
Replace batteries when the remote control's response becomes sluggish or it stops functioning. Always replace both AAA batteries at the same time with new ones. Do not mix old and new batteries, or different types of batteries.
5. Fejlfinding
If you experience issues with your ZWP Replacement Remote Control, refer to the following troubleshooting tips:
- Fjernbetjeningen svarer ikke:
- Kontroller, om batterierne er isat korrekt med den korrekte polaritet.
- Udskift batterierne med friske AAA-batterier.
- Ensure there is a clear line of sight between the remote's IR emitter and the projector's IR receiver. Remove any obstructions.
- Confirm the remote is within the effective operating range (up to 10 meters).
- Knapper virker ikke:
- Clean the remote control surface and buttons to ensure no debris is interfering with button presses.
- Udskift batterierne.
6. Specifikationer
Detailed specifications for the ZWP Replacement Remote Control:
| Feature | Specifikation |
|---|---|
| Mærke | ZWP |
| Kompatible enheder | JOWLURK M7, OWNKNEW GC357, HORLAT T10PRO Projectors |
| Forbindelsesteknologi | Infrarød (IR) |
| Controller type | Knap kontrol |
| Maksimal rækkevidde | 10 meter (ca. 33 fod) |
| Multi-Angle Operation | Op til 120 grader |
| Strømkilde | 2 x AAA batterier (medfølger ikke) |
| Materiale | ABS af høj kvalitet |
| Farve | Sort |
| Speciel funktion | Ergonomisk design |
6.1 Produktdimensioner
Image 6.1: The ergonomic design of the remote control, with dimensions: Length 6.10 inches, Width 1.57 inches, Height 0.47 inches.
- Længde: 6.10 tommer (15.5 cm)
- Bredde: 1.57 tommer (4.0 cm)
- Højde: 0.47 tommer (1.2 cm)
7. Support
For any questions, concerns, or issues not covered in this manual, please do not hesitate to contact the seller or manufacturer. We are committed to assisting you and resolving any problems you may encounter with your ZWP Replacement Remote Control.