Generic Full Size Metal Loft Bed with Desk & 2 Shelves (Model MF291650AAB) - Instruction Manual

1. Vigtige sikkerhedsoplysninger

Please read and understand all instructions before beginning assembly and use of this product. Failure to follow these instructions may result in serious injury.

• Vægt kapacitet: Do not exceed the maximum weight capacity for each component. The upper bed supports up to 250 lbs. The desk supports up to 120 lbs. Each shelf supports up to 60 lbs.
• Gelændere: Ensure all guardrails are securely installed and maintained. Guardrails are designed to prevent falls.
• Madrastykkelse: Use only a mattress with a maximum thickness of 6 inches for the upper bed to ensure proper guardrail height.
• Forsamling: This product requires assembly. Ensure all parts are present and securely fastened before use. Do not use power tools for assembly unless specifically instructed, as overtightening can damage components.
• Regelmæssig kontrol: Periodically check all connections (screws, bolts) to ensure they remain tight and secure.
• Børn: Children should be supervised when using the loft bed. Do not allow children to play on or under the bed without supervision.
• Ventilation: Ensure adequate ventilation around the bed, especially if used with a desk or other enclosed items underneath.

WARNING: Falling hazard. Do not allow children under 6 years of age on the upper bunk.

2. Pakkens indhold

Before assembly, please verify that all components listed in your product's packaging insert are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support immediately.

Typisk pakkeindhold inkluderer:

• Metal frame components (legs, side rails, bed base)
• Desk panel and support brackets
• Shelf panels and support brackets
• Ladder components
• Hardwarepakke (skruer, bolte, skiver, unbrakonøgle)
• Assembly instruction manual (this document)

Image 2.1: Illustrative view of bed frame components. Refer to your specific packaging for a complete list of parts.

3. Samlingsvejledning (opsætning)

Assembly is required for this loft bed. It is recommended that two adults assemble this product. Please follow the step-by-step instructions provided in the separate assembly guide included with your packaging. All parts are numbered for easy identification.

1. Forberedelse: Clear a spacious area for assembly. Lay out all parts and hardware.
2. Rammeenhed: Begin by assembling the main metal frame structure according to the numbered steps. Ensure all bolts are finger-tightened initially.
3. Desk and Shelves: Attach the desk and shelf components to the frame as indicated in the manual.
4. Installation af stige: Securely attach the ladder to the designated side of the loft bed.
5. Endelig stramning: Once all components are in place, systematically tighten all bolts and screws using the provided Allen wrench. Do not overtighten.
6. Sikkerhedstjek: Before use, ensure the bed is stable, all connections are secure, and guardrails are properly installed.

Billede 3.1: Eks.ample of the bed frame structure during assembly. Refer to your specific manual for detailed steps.

4. Brugsanvisning (drift)

This loft bed is designed to provide a space-saving solution with an integrated sleeping area, desk, and shelves.

• Soveområde: The upper bed is designed for a full-size mattress. Ensure the mattress thickness does not exceed 6 inches to maintain the effectiveness of the guardrails.
• Skrivebordsbrug: The integrated desk provides a stable surface for studying, working, or other activities. Do not place items heavier than 120 lbs on the desk.
• Hyldebrug: The two integrated shelves are suitable for books, small electronics, or decorative items. Do not place items heavier than 60 lbs per shelf.
• Stige: Always use the ladder to access and exit the upper bed. Do not jump on or off the bed.

Image 4.1: The loft bed in use, demonstrating the integrated desk and shelves.

Billede 4.2: Detaljeret view of the desk and shelf area.

5. Pleje og vedligeholdelse

Proper care and maintenance will extend the lifespan of your loft bed.

• Rensning: Rengør overfladen med en blød, damp cloth to remove dust and dirt. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Stram fastgørelsesanordninger: Regularly check and tighten all screws, bolts, and connections to maintain stability and prevent loosening over time.
• Miljøforhold: Avoid excessive moisture or direct sunlight, which can cause warping or fading of materials.
• Gulvbeskyttelse: Use protective pads under the bed legs to prevent scratches on your flooring.
• Flytning af sengen: When moving the bed, lift it rather than dragging it to prevent damage to the frame and your floor.

6. Fejlfinding

If you encounter any issues with your loft bed, please refer to the following common solutions:

• Knirkende lyde:
  • Check all bolts and screws. Tighten any loose connections.
  • Ensure the bed is on a level surface.
• Ustabilitet/Vinklen:
  • Verify that all parts are correctly assembled according to the manual.
  • Sørg for, at alle fastgørelseselementer er forsvarligt fastspændt.
  • Check for uneven flooring.
• Manglende dele:
  • Kontroller omhyggeligt alle emballagematerialer igen.
  • Kontakt kundesupport med dine købsoplysninger for at få hjælp.

For issues not covered here, or if troubleshooting steps do not resolve the problem, please contact customer support.

7. Specifikationer

Image 7.1: Detailed dimensions of the loft bed components.

8. Garanti og support

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your packaging for specific terms and conditions, including coverage duration and claim procedures.

For technical support, missing parts, or warranty claims, please contact the manufacturer or retailer where you purchased the product. Have your model number (MF291650AAB) and proof of purchase ready when contacting support.

Fabrikant: PengCity Furnishings

For further assistance, you may visit the product page on Amazon: Amazon-produktside