Antec Skeleton 360 ARGB Liquid CPU Cooler User Manual

1. Produktet er slutview

The Antec Skeleton 360 ARGB Liquid CPU Cooler is an all-in-one (AIO) liquid cooling solution designed to provide efficient thermal management for high-performance computing systems. It features a 360mm radiator, a high-performance pump with a unique skeleton-frame ARGB design, and three 120mm PWM ARGB fans. This cooler is compatible with a wide range of Intel and AMD CPU sockets, ensuring broad applicability for various PC builds.

Image 1.1: The Antec Skeleton 360 ARGB Liquid CPU Cooler, showcasing the pump, tubing, and 360mm radiator with three fans.

2. Opsætning og installation

Før du starter installationen, skal du sørge for, at dit system er slukket og frakoblet. Se bundkortets manual for specifikke oplysninger om CPU-sokler og krav til plads.

2.1 Pakkens indhold

Kontroller, at alle komponenter er til stede i pakken:

Image 2.1: All included mounting hardware and accessories for the Antec Skeleton 360 ARGB Liquid CPU Cooler.

• 360mm Radiator with integrated pump and tubing
• 3 x 120 mm PWM ARGB-blæsere
• Intel Mounting Bracket (LGA 115X/1200/1700/20XX)
• AMD monteringsbeslag (AM4/AM5)
• Bagplade (til Intel-sokler)
• Monteringsskruer og afstandsstykker
• Termisk pasta
• ARGB Controller/Cables (if included)

2.2 Preparing the CPU

1. Rengør CPU-overfladen grundigt med isopropylalkohol for at fjerne eventuel gammel termisk pasta.
2. Påfør en lille mængde termisk pasta på størrelse med en ært i midten af ​​CPU'ens integrerede varmespreder (IHS).

2.3 Installing the Radiator and Fans

1. Attach the three 120mm ARGB fans to the 360mm radiator using the provided long screws. Ensure the fan airflow direction is appropriate for your case (typically exhausting air out of the case).
2. Mount the assembled radiator and fan unit to an available 360mm fan mount location in your PC case (e.g., top, front). Secure it with the appropriate screws.

Image 2.2: The Antec Skeleton 360 ARGB cooler with its three 120mm ARGB fans mounted on the radiator.

2.4 Installing the Pump/Cold Plate

1. For Intel sockets, install the appropriate backplate behind the motherboard. For AMD sockets, use the existing stock backplate.
2. Attach the correct mounting standoffs to the motherboard around the CPU socket.
3. Place the pump/cold plate assembly onto the CPU, aligning the mounting holes.
4. Secure the pump/cold plate with the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.

Image 2.3: Close-up of the copper base plate on the Antec Skeleton 360 ARGB pump, designed for efficient heat transfer.

2.5 Kabelforbindelser

1. Tilslut pumpens 3-bens eller 4-bens strømkabel til CPU_FAN- eller AIO_PUMP-headeren på dit bundkort.
2. Connect each fan's 4-pin PWM cable to available fan headers on your motherboard or a fan hub.
3. Connect the ARGB cables from the pump and fans to the motherboard's 5V 3-pin ARGB header or an external ARGB controller. Ensure correct polarity to avoid damage.

3. Betjeningsvejledning

Once installed, the Antec Skeleton 360 ARGB Liquid CPU Cooler operates automatically based on your motherboard's fan and pump control settings. For optimal performance and aesthetics, configure these settings in your motherboard's BIOS/UEFI or through compatible software.

3.1 Fan and Pump Speed Control

• BIOS/UEFI: Access your motherboard's BIOS/UEFI settings during startup (usually by pressing Del or F2). Navigate to the fan control section to set custom fan curves for the CPU fans and pump. It is recommended to set the pump to run at 100% speed for consistent flow, while fan speeds can be adjusted based on CPU temperature.
• Software: Many motherboards offer proprietary software (e.g., ASUS AI Suite, MSI Dragon Center, Gigabyte SIV) that allows for fan and pump speed control within the operating system.

3.2 ARGB-lysstyring

The Skeleton-Frame pump head and PWM ARGB fans feature customizable lighting. Control options depend on how the ARGB cables are connected:

Image 3.1: The Antec Skeleton 360 ARGB pump head displaying its vibrant ARGB lighting effects.

• Bundkort synkronisering: If connected to a 5V 3-pin ARGB header, use your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) to synchronize and customize lighting effects.
• Ekstern controller: If an external ARGB controller is used, refer to the controller's manual for instructions on changing lighting modes, colors, and brightness.

4. Vedligeholdelse

Regular maintenance ensures optimal performance and longevity of your Antec Skeleton 360 ARGB Liquid CPU Cooler.

4.1 Støvrensning

• Radiator: Periodically clean dust from the radiator fins using compressed air. Ensure the fans are not spinning during cleaning to prevent damage.
• Fans: Gently wipe fan blades with a soft, dry cloth or use compressed air to remove dust buildup.

4.2 Tubing and Connections

Inspect the tubing and connections regularly for any signs of wear, kinks, or leaks. The high-density tubing is designed for durability, but visual checks are recommended.

Billede 4.1: Nærbillede view of the elastic high-density tubing used in the Antec Skeleton 360 ARGB cooler.

4.3 Genpåføring af termopasta

While not frequently required for AIOs, if you remove the pump/cold plate from the CPU for any reason, it is crucial to clean off the old thermal paste and apply new thermal paste before reinstallation.

5. Fejlfinding

This section addresses common issues you might encounter with your liquid CPU cooler.

5.1 Høje CPU-temperaturer

• Kontroller pumpetilslutning: Ensure the pump's power cable is securely connected to the CPU_FAN or AIO_PUMP header and is receiving power. Verify pump speed in BIOS/UEFI.
• Kontroller ventilatorforbindelser: Confirm all radiator fans are properly connected and spinning. Adjust fan curves in BIOS/UEFI or software to ensure adequate airflow.
• Termisk pasta: Verify that thermal paste was applied correctly and evenly between the CPU and cold plate. Reapply if necessary.
• Cold Plate Contact: Ensure the cold plate is making full and even contact with the CPU. Tighten mounting screws diagonally.
• Luftbobler: Orient the radiator higher than the pump to allow air bubbles to settle in the radiator, preventing them from interfering with pump operation.

5.2 Fans or ARGB Not Working

• Strømforbindelser: Ensure fan PWM cables are connected to motherboard headers or a fan hub.
• ARGB-forbindelser: Verify ARGB cables are correctly connected to a 5V 3-pin ARGB header on the motherboard or an ARGB controller. Check for correct polarity.
• Software/BIOS: Confirm ARGB lighting is enabled and configured in your motherboard's software or BIOS.
• Controller funktionalitet: If using an external ARGB controller, ensure it is powered and functioning correctly.

5.3 Usædvanlig støj

• Ventilatorstøj: Check for loose fan screws or cables obstructing fan blades. Adjust fan speed curves to reduce noise if temperatures allow.
• Pumpestøj: A slight hum from the pump is normal. Excessive gurgling or grinding might indicate air in the pump. Try gently tilting your PC case to help dislodge air bubbles. Ensure the pump is running at 100% speed.

6. Produktspecifikationer

7. Garanti og support

Antec products are manufactured to high quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Antec webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.

7.1 Teknisk support

If you encounter issues not covered in this manual or require further assistance, please contact Antec customer support through their official website. You may need to provide your product model and serial number.

Officiel Antec Webwebsted: www.antec.com