ASUS Prime MR120 ARGB Fan Instruction Manual

1. Introduktion og overview

The ASUS Prime MR120 ARGB Fan is designed to provide efficient and quiet cooling for your computer system. Featuring an extra-thick 28mm frame, 20 Addressable RGB (ARGB) LEDs with dual-sided lighting, and Pulse Width Modulation (PWM) control, this fan offers both performance and aesthetic customization. It is compatible with ASUS Aura Sync for synchronized lighting effects across various hardware components.

Billede: Overview of ASUS Prime MR120 ARGB Fan features.

2. Sikkerhedsoplysninger

Læs og følg disse sikkerhedsretningslinjer for at forhindre skade på produktet eller personskade:

• Sørg for, at dit computersystem er slukket og taget stikket ud af stikkontakten før installation eller vedligeholdelse.
• Håndter komponenterne forsigtigt for at undgå elektrostatisk udladning. Overvej at bruge en antistatisk håndledsrem.
• Do not attempt to disassemble the fan. There are no user-serviceable parts inside.
• Hold ventilatoren væk fra væsker og overdreven fugt.
• Ensure proper cable management to prevent interference with moving fan blades.

3. Pakkens indhold

Bekræft, at din pakke indeholder følgende varer:

• 1 x ASUS Prime MR120 ARGB Fan (Black)
• 4 x monteringsskruer
• 1 x PWM Fan Cable (pre-attached or separate)
• 1 x ARGB Cable (pre-attached or separate)

4. Opsætning og installation

Follow these steps to install your ASUS Prime MR120 ARGB Fan:

1. Forbered dit system: Sluk din computer, og tag stikket ud af strømkilden. Åbn dit pc-kabinet for at få adgang til monteringsstederne for ventilatoren.
2. Monter blæseren: Position the fan in your desired location (e.g., front, rear, top of the case, or on a radiator). Ensure the airflow direction is correct for your cooling configuration. Secure the fan using the provided mounting screws.
3. Tilslut PWM-kabel: Locate an available 4-pin fan header on your motherboard. Connect the fan's 4-pin PWM cable to this header. This allows your motherboard to control the fan speed based on system temperature.
4. Tilslut ARGB-kablet: Locate an available 3-pin 5V Addressable RGB header on your motherboard. Connect the fan's ARGB cable to this header. Note: Tilslut ikke dette til en 4-bens 12V RGB-header, da dette kan beskadige LED'erne.
5. Kabelstyring: Route the cables neatly to avoid interference and improve airflow within your case.
6. Luk kassen og tænd: Close your PC case, plug in the power, and power on your system.

Image: The 28mm extra-thick fan frame for enhanced cooling performance.

Image: Illustration of the 20 ARGB LEDs for system illumination.

5. Betjeningsvejledning

The ASUS Prime MR120 ARGB Fan operates with two primary functions: cooling and lighting.

• Køleydelse: The fan's speed is controlled via the 4-pin PWM connection to your motherboard. Most motherboards allow you to configure fan curves in the BIOS/UEFI settings or through software utilities. This enables the fan to adjust its speed (up to 1600 RPM) automatically based on CPU or system temperatures, providing optimal cooling while minimizing noise (as low as 21 dB(A)).
• ARGB-belysning: The 20 ARGB LEDs and dual-sided frame lighting are controlled through your motherboard's 3-pin 5V ARGB header. Utilize ASUS Aura Sync software or your motherboard's proprietary RGB control software to customize lighting colors, effects, and synchronization with other Aura Sync compatible devices.

Image: Dual-sided frame lighting for consistent aesthetics.

Image: Cooling performance metrics of the fan.

6. Vedligeholdelse

Regelmæssig vedligeholdelse er med til at sikre optimal ydeevne og levetid for din ventilator:

• Rensning: Periodically, power off your computer and unplug it. Use compressed air to gently remove dust buildup from the fan blades and frame. Avoid using liquid cleaners directly on the fan.
• Inspektion: Check fan cables for any signs of wear or damage. Ensure the fan is securely mounted and that no cables are obstructing its rotation.

7. Fejlfinding

If you encounter issues with your ASUS Prime MR120 ARGB Fan, refer to the following common problems and solutions:

• Ventilatoren drejer ikke:
  • Sørg for, at 4-bens PWM-kablet er korrekt tilsluttet en funktionel blæserheader på dit bundkort.
  • Tjek dit bundkorts BIOS/UEFI-indstillinger for at sikre, at blæserhovedet er aktiveret og konfigureret korrekt.
  • Verify that your power supply is providing adequate power to your system.
• ARGB Lights Not Working or Incorrect Colors:
  • Confirm the 3-pin ARGB cable is correctly connected to a 5V Addressable RGB header on your motherboard, not a 12V RGB header.
  • Ensure ASUS Aura Sync software or your motherboard's RGB control utility is installed and configured.
  • Check for any loose connections in the ARGB chain if multiple devices are connected.
• Overdreven støj:
  • Verify that the fan is securely mounted and not vibrating against the case.
  • Sørg for, at ingen kabler rører ventilatorbladene.
  • Adjust the fan curve in your motherboard's BIOS/UEFI or software to reduce fan speed at lower temperatures.
• PWM Daisy-Chaining: Note that while ARGB connections can often be daisy-chained, PWM fan connections typically cannot be daisy-chained without a dedicated fan hub or splitter cable if you have more fans than available motherboard headers.

8. Specifikationer

Image: Dual colors and orientation options for the fan.

9. Garanti og support

Garantioplysninger: The ASUS Prime MR120 ARGB Fan comes with a 2-års garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl og sikrer, at produktet opfylder de specificerede ydeevnestandarder under normal brug. Gem venligst din købsbevis til garantikrav.

Teknisk support: For teknisk assistance, fejlfinding ud over denne manual eller garantiforespørgsler, besøg venligst den officielle ASUS-support webwebsted eller kontakt ASUS kundeservice. Du kan finde kontaktoplysninger og supportressourcer på www.asus.com/support/.