EasySMX S10 Wireless Controller Instruction Manual

Indledning

This manual provides detailed instructions for the EasySMX S10 Wireless Controller. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and user experience across various platforms including Nintendo Switch, PC, iOS, and Android devices.

Produktegenskaber

• One-Tap Wake Up: Seamlessly wake up your Nintendo Switch console with a single button press.
• TMR Anti-Drift Joysticks: Combines Hall Effect durability with carbon-film precision for zero-drift and ultra-smooth analog input.
• Full Mechanical Buttons: Micro-switch buttons with 0.3mm actuation and a lifespan of over 5 million clicks, providing tactile feedback.
• HD Vibration: Equipped with ALPS Linear HD Rumble motors for multi-layered haptic feedback.
• Langtidsholdbart batteri: Built-in 1200mAh battery offers up to 17 hours of playtime with lights and vibration, or up to 26 hours without.
• Interchangeable D-pad & Custom Faceplate: Allows swapping between disc and cross-style D-pads and magnetic removable faceplates for personalization.
• Yderligere funktioner: Customizable RGB lighting, 2 programmable back buttons, 6-axis gyroscope for motion sensing, and NFC function.

Opsætning

Pakkens indhold

• EasySMX S10 Wireless Controller
• USB-C ladekabel
• Interchangeable D-pads (if included)
• Customizable Faceplates (if included)
• Brugermanual

Controller layout

The EasySMX S10 controller features standard gaming buttons, including A/B/X/Y buttons, directional pad, left and right analog sticks, shoulder buttons (L/R), and triggers (ZL/ZR). Additionally, it includes a HOME button, a Capture button, and two programmable back buttons (GR/GL).

Opladning af controlleren

Connect the provided USB-C cable to the controller's charging port and the other end to a USB power source (e.g., a computer, wall adapter). The LED indicators on the controller will show charging status and turn off when fully charged. A full charge typically takes approximately 3 hours.

Betjeningsvejledning

Connecting to Nintendo Switch / Switch 2

1. Set the mode toggle switch on the back of the controller to the "S" mode.
2. Press and hold the HOME button on the controller for 3 seconds until the LED indicators flash rapidly.
3. On your Nintendo Switch console, navigate to Controllere > Skift greb/rækkefølge.
4. When the LED on the controller becomes solid and you feel a short vibration, pairing is complete.
5. (First-time connection only) Within 20 seconds after pairing, remove and reattach the Joy-Con controllers from the console. This action activates the wireless wake-up function for future use.
6. For future reconnections, simply short-press the HOME button to automatically reconnect and wake the console.

Tilslutning til pc

1. Set the mode toggle switch on the back of the controller to the "X" mode.
2. Connect the controller to your PC via the provided Type-C cable. The controller will be recognized as an Xbox Wireless Controller.
3. For wireless connection, ensure Bluetooth is enabled on your PC. Søg efter "Xbox Wireless Controller" in your Bluetooth settings and select it to pair.

Connecting to Mobile (iOS & Android)

1. Set the mode toggle switch on the back of the controller to the "X" mode.
2. Aktiver Bluetooth på din mobiltelefon.
3. Søg efter "Xbox Wireless Controller" in your phone's Bluetooth settings and select it to pair.
4. When the LED on the controller becomes steady with a short vibration, pairing is confirmed.

Tilpasning af RGB-belysning

The controller features customizable RGB lighting. Refer to the quick start guide included in the packaging for specific button combinations to change lighting modes, colors, or to turn the lighting off.

Programming Back Buttons

The two back buttons (GR and GL) can be programmed to perform specific actions or combos. Consult the quick start guide for detailed instructions on how to map functions to these buttons.

Swapping D-Pads and Faceplates

The S10 controller allows for easy customization. The D-pad can be swapped between a classic cross-style and a smooth circular control. The magnetic faceplates can also be removed and replaced to personalize the controller's appearance.

Image: The EasySMX S10 controller highlighting the swappable D-pads, allowing users to choose between a classic cross-style or a smooth circular control.

Opretholdelse

• Hold controlleren ren ved at tørre den af ​​med en blød, tør klud.
• Undgå at udsætte controlleren for ekstreme temperaturer, fugtighed eller direkte sollys.
• Forsøg ikke at skille controlleren ad, da dette kan ugyldiggøre garantien.
• Opbevar controlleren et sikkert sted, når den ikke er i brug, for at forhindre skader.

Fejlfinding

Controlleren opretter ikke forbindelse/parrer ikke

• Sørg for, at controlleren er tilstrækkeligt opladet.
• Verify the mode toggle switch on the back is set to the correct platform (S for Switch, X for PC/Mobile).
• Restart the console/device and the controller, then attempt the pairing process again.
• If connecting to Switch for the first time and wake-up function doesn't activate, repeat the pairing process and ensure Joy-Cons are removed and reattached within 20 seconds after initial pairing.

NFC Function Not Working

• Ensure the NFC function is enabled on your console/device settings.
• Place the Amiibo or NFC tag directly over the NFC sensor area on the controller.

Image: The EasySMX S10 controller demonstrating its NFC function, allowing for scanning and unlocking in-game surprises.

Specifikationer

Garanti og support

EasySMX-produkter leveres typisk med en producentgaranti. Se venligst garantikortet, der er inkluderet i produktemballagen, eller besøg den officielle EasySMX-side. webwebsted for detaljerede garantioplysninger og vilkår.

For technical support, troubleshooting assistance, or any product-related inquiries, please contact EasySMX customer service through their official webwebstedet eller kontaktoplysningerne i din produktdokumentation. Du kan også besøge EasySMX-butik på Amazon for mere information og supportressourcer.