FEETMOR Fh04 Heated Glove Liners User Manual

1. Introduktion

Thank you for choosing FEETMOR Heated Glove Liners, model Fh04. These thin, flexible, and rechargeable glove liners are designed to provide warmth and comfort in cold conditions, featuring touchscreen compatibility and an anti-slip grip. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your heated glove liners.

2. Sikkerhedsoplysninger

• Læs alle instruktioner før brug.
• Do not use if the gloves or batteries appear damaged.
• Keep batteries away from water and extreme temperatures.
• Batteripakken må ikke punkteres, åbnes eller skilles ad.
• Use only the provided charger and charging cable.
• Hvis du oplever ubehag eller overdreven varme, skal du straks tage handskerne af.
• Consult a physician before use if you have a medical condition, especially circulatory issues or nerve damage.

3. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• 1 Pair of FEETMOR Heated Glove Liners
• 2 x 2200mAh Li-Polymer Rechargeable Batteries
• 1 x 20W PD Power Adapter
• 1 x USB-C opladningskabel
• 1 x brugermanual
• 1 x Gift Box Bag

Image: Contents of the FEETMOR Heated Glove Liners package, showing the gloves, two batteries, a power adapter, and a charging cable.

4. Opsætning

4.1 Opladning af batterierne

1. Connect the USB-C charging cable to the 20W PD power adapter.
2. Sæt adapteren i en almindelig stikkontakt.
3. Connect the USB-C end of the cable to each 7.4V 16.28Wh battery.
4. Allow approximately 3-4 hours for a full charge. The indicator light on the battery will change when fully charged (refer to battery instructions for specific indicator behavior).

4.2 Connecting Batteries to Gloves

1. Locate the zippered pocket on the cuff of each glove.
2. Open the zipper and pull out the power cord.
3. Remove the protective cap from the power cord connector.
4. Connect the power cord from the glove to the charged battery.
5. Carefully place the connected battery into the zippered pocket and close the zipper securely.

5. Betjening

5.1 Power On/Off and Temperature Control

1. For at tænde: Press and hold the power button on the back of the glove for approximately 3 seconds. The button will illuminate, indicating the gloves are on.
2. Sådan justeres temperaturen: Short press the power button to cycle through the three heat settings:
   • Rødt lys: High-end heat setting.
   • Hvidt lys: Middel varme indstilling.
   • Blåt lys: Lav varmeindstilling.
3. For at slukke: Tryk på tænd/sluk-knappen og hold den nede i cirka 3 sekunder, indtil lyset slukker.

The heating elements are designed to warm the entire hand and fingertips evenly. The gloves warm up in under 30 seconds.

5.2 Touchskærmens funktionalitet

The thumb and index finger of each glove are equipped with touch sensors, allowing you to operate touchscreen devices such as smartphones, tablets, and car displays without removing your gloves.

Image: A person wearing FEETMOR heated glove liners uses their index finger to interact with a smartphone touchscreen, demonstrating the glove's touch-sensitive function. Other devices like a car touch screen and tablet are also shown as compatible.

5.3 Anti-Slip Grip Design

The palm areas of the glove liners feature embedded silicone particles, providing enhanced abrasion resistance and a secure grip. This design is beneficial for activities requiring firm handling, such as driving, cycling, or holding ski poles.

Billede: Et nærbillede view of the palm of a FEETMOR heated glove liner, highlighting the textured anti-skid silicone pattern designed for improved grip.

5.4 Brugsanbefalinger

These ultra-thin glove liners are suitable for various activities in cold conditions, including driving, typing, walking, photography, and light outdoor use. For extremely cold weather, it is recommended to wear them as a liner under thicker gloves for additional insulation.

Image: A person wearing FEETMOR heated glove liners is shown typing on a laptop, illustrating the flexibility and touchscreen compatibility for indoor or light outdoor tasks.

Image: A person wearing FEETMOR heated glove liners is shown driving a car, highlighting their suitability for maintaining warmth and grip while operating a vehicle.

6. Vedligeholdelse

6.1 Rengøringsinstruktioner

• Fjern altid batterierne før rengøring.
• The glove liners are machine washable. Place them in a laundry bag to protect them during washing.
• Alternatively, hand wash the gloves in cold water with mild detergent.
• Må ikke bleges, stryges eller renses.
• Air dry thoroughly before reconnecting batteries or storing.

6.2 Opbevaring

Store the glove liners and batteries in a cool, dry place when not in use. Ensure batteries are partially charged (around 50%) before long-term storage to prolong their lifespan.

7. Fejlfinding

• Handsker varmer ikke op:
  • Sørg for, at batterierne er fuldt opladede.
  • Verify that the battery is correctly connected to the glove's power cord.
  • Confirm the power button has been pressed and held for 3 seconds to turn on.
• Uneven heating or cold fingertips:
  • The heating elements are primarily located on the dorsal surface of the hands and fingers. While designed for even warmth, external factors like wind or extreme cold can affect perceived heat distribution.
  • Consider wearing thicker outer gloves for additional insulation in very cold conditions.
• Kort batterilevetid:
  • Battery life varies significantly with the selected heat setting. Higher settings consume more power.
  • Ensure batteries are fully charged before each use.
  • Battery performance can decrease in extremely cold environments.
• Discomfort from battery placement:
  • The batteries are designed to fit into the cuff pockets. If discomfort occurs, adjust the battery position within the pocket.

8. Specifikationer

8.1 Størrelsesskema

To ensure the best fit, please refer to the sizing chart below. If your measurement falls between sizes, it is recommended to choose the larger size.

Image: A sizing chart for FEETMOR heated glove liners, displaying hand circumference measurements in inches and centimeters for sizes XS, S, M, L, and XL, along with an illustration of how to measure your hand.

9. Garanti og support

FEETMOR products are designed for quality and durability. For warranty information, technical support, or any questions regarding your heated glove liners, please contact FEETMOR customer service through the retailer where the product was purchased or visit the official FEETMOR webwebsted. Gem venligst din købsbevis til garantikrav.