Vigtige sikkerhedsinstruktioner
- Læs alle instruktioner omhyggeligt før brug.
- This appliance is for indoor aquarium use only.
- Sørg for, at strømforsyningen voltage matches the rating label on the filter.
- Always unplug the filter from the power outlet before performing any maintenance, cleaning, or when not in use.
- Do not operate the filter if it has a damaged cord or plug, or if it malfunctions or has been dropped or damaged in any manner.
- To avoid electric shock, do not immerse the power plug or cord in water or other liquids.
- Opbevar filteret utilgængeligt for børn.
- Ensure the filter is securely attached to the aquarium before operation.
- Not suitable for framed aquariums. Please check your aquarium type before installation.
Pakkens indhold
Kontroller venligst, at alle komponenter er til stede og ubeskadigede, når du åbner pakken.
- Filter Unit (Main body with motor)
- Indløbsrørsamling
- Outlet dyse
- Aktivt kulfilter bomuld
- Overflow Prevention Cotton
- Sponge Protection Cover for Inlet
- Adjustable Hanging Hook (5-15mm)

Opsætningsvejledning
- Assemble the Inlet Pipe: Connect the various sections of the inlet pipe and attach the sponge protection cover to the bottom.

Figure 2: Illustration of assembling the inlet pipe components. - Installer filtermedie: Place the activated carbon filter cotton and overflow prevention cotton into the filter compartment. Ensure they are correctly seated.

Figure 3: Diagram showing the placement of filter media within the unit. - Fastgør til akvariet: Securely hang the filter unit onto the edge of your aquarium using the adjustable hanging hook. The hook is designed for tank glass thickness between 5-15mm. Note: This filter is not compatible with aquariums that have a frame around the edge.

Figure 4: The filter unit securely attached to the aquarium rim, showing the adjustable hook. - Klargør filteret: Before plugging in, add water to the filter compartment until it is full. This will initiate the self-priming process.

Figure 5: Adding water to the filter compartment to prime it before starting. - Tilslut strøm: Plug the filter into a suitable power outlet. The filter should start operating automatically.
Video 1: Demonstrates the setup and initial operation of a hygger aquarium filter, including connecting the power. This video shows the filter starting and circulating water.
Betjeningsvejledning
Vandstrømsjustering
The filter features an adjustable knob on the top, allowing you to control the water flow rate up to a maximum of 400L/H. This is beneficial for aquariums with fish that prefer gentler currents, such as Medaka, Betta, or Ryukin goldfish.

Oil Film Removal Function
The filter is equipped with an oil film removal function to maintain a clear water surface, enhancing the viewing experience of your aquarium inhabitants.

Oxygen Supply (Aeration)
The design of the filter, where water is drawn up and then falls back into the tank, also provides aeration, effectively circulating oxygen throughout the aquarium. This creates an ideal environment for fish and shrimp.

Opretholdelse
Regular maintenance is crucial for optimal filter performance and water quality. Always unplug the filter before performing any maintenance.
Cleaning Filter Media
- The filter utilizes multiple media types, including activated carbon filter cotton and overflow prevention cotton.
- These media can be replaced individually as needed.
- Rinse the filter media with old aquarium water during water changes to preserve beneficial bacteria. Avoid using tap water directly, as chlorine can harm bacteria.

Cleaning the Filter Unit
- Periodically disassemble the filter unit to clean the impeller and internal components.
- Use a soft brush to remove any accumulated debris or algae.
- Ensure all parts are reassembled correctly before restarting the filter.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Filter not starting/no water flow |
|
|
| Reduceret vandgennemstrømning |
|
|
| Overdreven støj |
|
|
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | HG238-JP |
| Størrelse | M |
| Max flowhastighed | 400 L/H |
| Applicable Tank Volume | Ca. 20-38 L |
| Applicable Tank Length | Op til 50 cm |
| Applicable Tank Edge Thickness | 5-15 mm (unframed tanks only) |
| Støjniveau | Under 25 dB |
| Vandtype | Freshwater and Saltwater |
| Funktioner | Adjustable Water Flow, Oil Film Removal, Multi-stage Filtration, Oxygen Supply, Anti-suction Sponge Cover |

Garanti og support
For warranty information and customer support, please refer to the contact details provided with your purchase or visit the official hygger webwebsted.
Gem din købskvittering som købsbevis i tilfælde af garantikrav.