1. Introduktion og overview
The Ulanzi SK-23 Electric Suction Mount is a versatile and robust mounting solution designed for action cameras and smartphones. Featuring advanced electric vacuum suction technology, it provides secure attachment to various smooth surfaces, ensuring stability even in dynamic environments. Its 360-degree adjustable ball head and 1/4-inch screw hole offer broad compatibility and flexible positioning for diverse photography and videography needs.
Figure 1: Ulanzi SK-23 Electric Suction Mount
2. Sikkerhedsoplysninger
- Ensure the mounting surface is clean, dry, and smooth for optimal suction.
- Do not attach the mount to curved, porous, or textured surfaces, as this may compromise suction integrity.
- Verify the mount is securely attached before placing any device on it.
- Undgå at udsætte enheden for ekstreme temperaturer eller direkte sollys i længere perioder.
- Keep the device away from water and moisture, as it contains electronic components.
- Do not attempt to disassemble or modify the mount, as this will void the warranty and may cause damage.
- Always use the provided charging cable for recharging the internal battery.
3. Pakkens indhold
Tjek venligst pakken for følgende varer:
- Ulanzi SK-23 Electric Suction Mount
- Magisk arm
- GoPro Mount Adapter
- USB Type-C Charging Cable (not explicitly mentioned but implied by review)
4. Produktkomponenter
The Ulanzi SK-23 Electric Suction Mount consists of the main suction unit, a magic arm for articulation, and a GoPro mount adapter for compatibility with action cameras. The main unit features an electric vacuum pump and a 1/4-inch screw hole for direct attachment or use with the magic arm.
Figure 2: 1/4-inch screw attachment point on the mount.
5. Opsætning
5.1 Charging the Mount
Before initial use, fully charge the electric suction mount. Connect the provided USB Type-C cable to the charging port on the mount and a compatible USB power source (e.g., car charger, power bank, computer USB port). The charging indicator light will show the charging status. A review mentions a red lamp during charging, which should turn off or change color when fully charged.
5.2 Montering af holderen
- Select a clean, dry, and smooth surface (e.g., glass, metal, car body).
- Place the suction cup firmly against the desired surface.
- Press the power/suction button on the mount. The electric vacuum pump will activate, creating a strong suction seal. This process takes a few seconds.
- Ensure the mount is securely fixed before proceeding.
Figure 3: One-push instant suction activation.
5.3 Tilslutning af din enhed
The mount features a standard 1/4-inch screw hole. You can attach devices directly or use the included magic arm and GoPro adapter.
- For devices with 1/4-inch screw: Screw your camera or accessory directly onto the 1/4-inch screw post on the mount or the magic arm.
- Til GoPro/actionkameraer: Attach the GoPro mount adapter to the 1/4-inch screw post, then secure your action camera to the adapter.
- Til smartphones: Use a compatible smartphone holder (not included, but often uses a 1/4-inch screw) with the mount or magic arm.
Figur 4: Eksample of an action camera mounted for stable recording.
6. Betjeningsvejledning
6.1 Tænd/sluk
The mount powers on automatically when the suction function is activated. To power off, release the suction as described below.
6.2 Activating Suction
As described in the setup section, simply place the mount on a smooth surface and press the suction button. The electric pump will engage to create a strong vacuum seal. The mount is designed to automatically maintain suction, re-engaging the pump if pressure drops.
Figure 5: The mount provides up to 1KG of suction power.
6.3 Adjusting Angle and Position
The included magic arm features a double ball head design, allowing for 360-degree rotation and 180-degree horizontal adjustment. Loosen the adjustment knob on the side of the magic arm to freely position your device. Once the desired angle is achieved, tighten the knob to secure all joints simultaneously. The ball joints also have a non-slip rubber surface to prevent damage and increase friction.
6.4 Relateretasing Suction
To release the mount, press the release button (often the same as the suction button, or a dedicated release button if present). This will disengage the vacuum, allowing you to easily remove the mount from the surface.
Figure 6: Versatile usage scenarios for the SK-23 mount.
Figure 7: Car mounting options for the SK-23 mount.
7. Vedligeholdelse
- Rensning: Wipe the suction cup and the main body with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the suction cup is free of dust and debris before each use.
- Opbevaring: Store the mount in a cool, dry place away from direct sunlight and extreme temperatures.
- Batteripleje: For optimal battery life, avoid fully discharging the mount frequently. Recharge it regularly, especially if storing for extended periods.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Mount does not suction properly. | Surface is not clean, dry, or smooth; low battery; suction cup is damaged. | Clean the surface thoroughly. Ensure the surface is smooth and non-porous. Charge the mount. Inspect the suction cup for damage. |
| Device falls off the mount. | Mount not securely attached; device not properly tightened on the 1/4-inch screw; excessive weight. | Re-attach the mount ensuring strong suction. Tighten the device securely. Ensure the device weight does not exceed 1kg. |
| Adjustment knob does not hold position. | Knob not tightened sufficiently; excessive weight on the arm. | Tighten the adjustment knob firmly. Ensure the device weight is within limits for the magic arm. |
| Charging indicator light does not work. | Faulty cable; power source issue; internal battery issue. | Try a different USB Type-C cable and power source. If the issue persists, contact customer support. |
9. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Ulanzi |
| Model | SK-23 |
| Materiale | Aluminiumslegering |
| Maximum Suction Load | 1 kg (2.2 lbs) |
| Rotation | 360° (Ball Head) |
| Monteringstype | Electric Vacuum Suction Cup (Front Glass, Car Body, Smooth Surfaces) |
| Enhedskompatibilitet | GoPro Hero 13/12/11/10/9/8/7, GoPro Max, DJI OSMO Action 5 Pro/4/3/2, DJI Osmo Pocket 4/3/2, Insta360 X4/X3/X2, Insta360 Go 3, Insta360 Ace Pro, iPhone 16/15 Pro Plus Max, Galaxy, Google Pixel, and other devices with 1/4-inch screw hole. |
| Input | Type-C, 5V1A |
| Produktets vægt | Ca. 190 g (0.47 lbs) |
10. Garanti og support
10.1 Producentgaranti
Ulanzi products come with a 12-month quality warranty. This warranty covers initial defects and natural failures during normal use. For warranty claims, please retain your proof of purchase.
10.2 Kundesupport
For any questions, technical assistance, or warranty service, please contact Ulanzi customer support through the retailer where you purchased the product or visit the official Ulanzi webwebsted for kontaktoplysninger.
