LJLM0373DJHHH7WMPR7

Generic Cordless Pressure Washer (Model LJLM0373DJHHH7WMPR7) User Manual

Comprehensive Instructions for Safe and Effective Operation

1. Introduktion

Thank you for choosing the Generic Cordless Pressure Washer. This device is designed for efficient cleaning tasks around your home, car, driveway, and patio. Its portable and cordless design offers convenience and versatility. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your pressure washer. Please read all instructions carefully before use and retain this manual for future reference.

2. Sikkerhedsinstruktioner

Overhold altid grundlæggende sikkerhedsforanstaltninger ved brug af elektriske apparater for at reducere risikoen for brand, elektrisk stød og personskade.

3. Produktkomponenter

The following components are included with your Cordless Pressure Washer:

Generic Cordless Pressure Washer with all components

Figur 3.1: Overview of the Cordless Pressure Washer and its included accessories, including the main unit, battery, nozzles, foam pot, and hoses.

All components of the pressure washer laid out

Figur 3.2: En detaljeret view of all individual components supplied with the pressure washer, including the main unit, battery, charging cable, water pipe, quick connector, filter, foam pot, bottle adapter, fan-shaped nozzle, linear nozzle, and metal extension rod.

4. Opsætningsvejledning

4.1 Opladning af batteriet

  1. Sørg for, at batteriet er fuldt opladet før første brug.
  2. Connect the charging cable to the battery and a suitable power source.
  3. The charging indicator light will show the charging status. Disconnect once fully charged.

4.2 Assembling the Pressure Washer

  1. Tilslut batteri: Slide the charged 21V battery into the base of the main pressure washer unit until it clicks securely into place.
  2. Connect Water Pipe: Attach one end of the water pipe to the quick connector. Insert the filter onto the other end of the water pipe.
  3. Tilslut til enhed: Connect the quick connector to the water inlet port on the pressure washer unit. Ensure a tight fit.
  4. Attach Extension Rod: Screw the metal extension rod onto the front of the pressure washer unit.
  5. Vælg dyse: Choose either the fan-shaped spray nozzle or the linear spray nozzle based on your cleaning task. Push the selected nozzle onto the end of the metal extension rod until it locks.
  6. Optional Foam Pot: For foam application, fill the foam pot with appropriate cleaning solution and attach it directly to the pressure washer unit or the extension rod, depending on the design.
Fan-shaped and linear spray nozzles

Figur 4.1: The two interchangeable nozzles: fan-shaped for wider coverage and linear for concentrated spray.

5. Betjeningsvejledning

5.1 Grundlæggende betjening

  1. Prepare Water Source: Place the filter end of the water pipe into a bucket of clean water or connect it to a garden hose using the appropriate adapter (if included).
  2. Forbered pumpen: Before starting, hold the trigger for a few seconds to allow water to flow through the system and expel any air.
  3. Start rengøring: Press the power button or pull the trigger to activate the pressure washer. Direct the spray towards the surface to be cleaned, maintaining a safe distance.
  4. Juster dyse: Change nozzles as needed for different cleaning tasks. The fan-shaped nozzle is suitable for general washing, while the linear nozzle provides a concentrated stream for stubborn dirt.
  5. Stop drift: Release the trigger to stop the water flow. For extended breaks, turn off the power button.
Person using the cordless pressure washer to clean a patio

Figur 5.1: An individual demonstrating the use of the cordless pressure washer for cleaning outdoor surfaces, highlighting its portability and ease of use.

5.2 Using the Foam Pot

  1. Fill the foam pot with a suitable car wash soap or cleaning solution. Do not overfill.
  2. Attach the foam pot to the pressure washer unit or extension rod.
  3. Activate the pressure washer. The unit will draw the solution and create foam for pre-washing or deep cleaning.
  4. After applying foam, switch back to a water-only setup to rinse the surface thoroughly.
Person using the pressure washer with foam pot to wash a car

Figur 5.2: An individual applying foam to a car using the pressure washer's foam pot attachment, demonstrating its use for vehicle cleaning.

Person rinsing a car with the cordless pressure washer

Figur 5.3: An individual rinsing a car, illustrating the pressure washer's effectiveness in removing soap and dirt from vehicle surfaces.

6. Vedligeholdelse

6.1 Rengøring af enheden

6.2 Pleje af batterier

6.3 Opbevaring

7. Fejlfinding

ProblemMulig årsagLøsning
Enheden starter ikkeBatteriet er ikke opladet eller installeret forkert.Sørg for, at batteriet er fuldt opladet og isat sikkert.
Lavt vandtrykInsufficient water supply; clogged filter; air in the system.Check water source; clean filter; prime the pump by holding the trigger until steady water flow.
Vandlækage fra tilslutningerLøse forbindelser; slidte O-ringe.Spænd alle forbindelser; inspicer og udskift O-ringe, hvis de er beskadigede.
Ingen vandgennemstrømningWater pipe kinked; filter blocked; no water in source.Straighten water pipe; clean filter; ensure water source is available.

8. Specifikationer

Dimensions of the cordless pressure washer

Figur 8.1: Diagram illustrating the key dimensions of the cordless pressure washer unit, including length, height, and width.

9. Garanti og support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Retain your proof of purchase for any warranty claims.

Producent: Generisk

Documents - LJLM0373DJHHH7WMPR7 – LJLM0373DJHHH7WMPR7

ingen relevante dokumenter