JONR ED12 Lite våd-tør støvsuger brugsanvisning

1. Introduktion

Thank you for choosing the JONR ED12 Lite Wet Dry Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before first use and keep it for future reference.

The JONR ED12 Lite is designed for cleaning sealed hard floors, combining vacuuming and mopping in one step. Its cordless design, self-cleaning function, and anti-tangle technology make floor care convenient and effective.

2. Sikkerhedsinstruktioner

• Læs alle instruktioner før brug af apparatet.
• Brug kun som beskrevet i denne manual. Brug kun tilbehør, der er anbefalet af fabrikanten.
• Nedsænk ikke apparatet i vand eller andre væsker.
• Hold hår, løstsiddende tøj, fingre og alle dele af kroppen væk fra åbninger og bevægelige dele.
• Må ikke bruges til at opsamle brændbare eller brændbare væsker, såsom benzin, eller brug i områder, hvor de kan være til stede.
• Tag ikke noget op, der brænder eller ryger, såsom cigaretter, tændstikker eller varm aske.
• Vær ekstra forsigtig ved rengøring på trapper.
• Må ikke bruges som legetøj. Omhyggelig opmærksomhed er nødvendig, når den bruges af eller i nærheden af ​​børn.
• Use only JONR cleaning solution to prevent damage to the motor and ensure optimal performance.
• Sørg for, at batteriet er fuldt opladet før første brug.

3. Produktkomponenter

The JONR ED12 Lite Wet Dry Vacuum Cleaner comes with the following components:

• ED12 Lite Wet Dry Vacuum Cleaner (Main Body)
• Strømadapter
• Rengøringsopløsning
• Instruktionsmanual
• Rengøringsbørste
• Opladningsbase
• Rullebørste (forinstalleret)
• Clean Water Tank (750mL)
• Used Water Tank (450mL)

Figure 1: JONR ED12 Lite main unit and included accessories, including the charging base, cleaning solution, and cleaning brush.

4. Montering

Follow these steps to assemble your JONR ED12 Lite:

1. Install the Roller Brush: Place the roller brush at the front of the main body. Ensure it clicks securely into place.
2. Install the Clean Water Tank: Insert the clean water tank into its designated slot on the main body. Screw it securely.
3. Fastgør håndtaget: Insert the handle vertically into the main body until you hear a click, indicating it is locked.
4. Oplad støvsugeren: Connect the power adapter to the charging base, then plug it into a wall socket. Place the assembled vacuum onto the charging base to charge the battery. The display will indicate charging status.

5. Betjening

5.1 Fyldning af vandtanke

The JONR ED12 Lite features a dual-chamber design to separate clean and dirty water.

• Clean Water Tank (750mL): Remove the clean water tank from the main body. Fill it with clean water and add the recommended amount of JONR cleaning solution (approximately 10mL). Securely close the tank and reattach it to the vacuum.
• Used Water Tank (450mL): This tank collects dirty water and debris. It should be emptied and cleaned after each use.

Figure 2: The JONR ED12 Lite features separate clean (750mL) and dirty (450mL) water tanks to ensure cleaning with fresh water.

5.2 Rengøringstilstande

The vacuum offers two cleaning modes for different needs:

• Standardtilstand: Ideal for efficient daily cleaning and light messes.
• Boost-tilstand: Provides enhanced power for tougher messes, occasional spills, and heavily soiled areas.

Figure 3: Illustration of the two cleaning modes: Auto Mode for general cleaning and Max Mode for stubborn messes.

5.3 Kantrensning

The ED12 Lite is designed to clean up to 0.1 inches from edges, ensuring thorough cleaning along baseboards, corners, and narrow gaps.

Figure 4: The vacuum's design allows for effective cleaning in corners and along skirting boards, reaching within 0.1 inches of edges.

5.4 Selvkørende funktion

Weighing only 7.7 lbs, the vacuum features a self-propelled function that allows it to glide forward with minimal effort, reducing user fatigue.

Figure 5: The lightweight design and self-propelled feature make the JONR ED12 Lite easy to maneuver and carry, even up stairs.

6. Vedligeholdelse

6.1 Tømning af beskidtvandstank

After each use, remove the used water tank, pour out the dirty water and debris, and rinse the tank thoroughly with clean water. Ensure the filter is also cleaned.

6.2 Selvrensningscyklus

Place the vacuum on its charging base. Press the self-cleaning button on the handle to initiate the automatic self-cleaning cycle. The vacuum will clean its roller brush and internal components, then dry the roller with air to prevent odors and bacterial growth.

Figure 6: The vacuum automatically cleans its roller brush and dries it with air when placed on the charging base and the self-cleaning cycle is activated.

6.3 Anti-Tangle-teknologi

The ED12 Lite features a built-in comb and flat scraper to reduce hair wrap around the roller brush and prevent blockages. Regularly check and clean the roller brush and scraper to maintain optimal performance.

Figur 7: Detaljeret view of the anti-tangling design, showing the comb-tooth scraper that helps remove hair from the roller brush during operation.

7. Fejlfinding

• Ingen strøm: Ensure the battery is charged. Check the power adapter and charging base connections.
• Dårlig sugeevne: Check if the used water tank is full and needs emptying. Ensure the roller brush is clean and free of obstructions. Clean the filter.
• Vandlækage: Verify that both the clean and used water tanks are correctly installed and their caps are securely closed.
• Usædvanlig støj: Check the roller brush for any foreign objects or damage. Ensure all components are correctly assembled.

8. Specifikationer

9. Garanti og support

For warranty information, technical support, or to purchase replacement parts, please refer to the warranty card included in your product packaging or visit the official JONR webwebsted.