Jonsbo N10 Mini-ITX PC Case User Manual

1. Introduktion

The Jonsbo N10 Mini-ITX PC Case is designed for users seeking a compact, functional, and elegantly designed enclosure for minimalist PC systems. It is suitable for space-saving office PCs, quiet HTPCs (Home Theater Personal Computers), or compact NAS (Network Attached Storage) systems. This manual provides essential information for the proper assembly, operation, and maintenance of your Jonsbo N10 case.

Figure 1: Jonsbo N10 Mini-ITX PC Case in a typical desktop setup.

2. Sikkerhedsoplysninger

• Afbryd altid strømforsyningen fra stikkontakten, før du installerer eller fjerner komponenter.
• Håndter alle komponenter forsigtigt for at undgå skader fra statisk elektricitet. Overvej at bruge en antistatisk håndledsrem.
• Hold små dele og skruer væk fra børn.
• Sørg for tilstrækkelig ventilation omkring kabinettet for at forhindre overophedning.
• Forsøg ikke at ændre kabinettet eller dets komponenter, da dette kan ugyldiggøre garantien og udgøre en sikkerhedsrisiko.

3. Pakkens indhold

Kontroller venligst, at alle følgende varer er inkluderet i din pakke:

• Jonsbo N10 Mini-ITX PC Case
• 2 x Pre-installed Cooling Fans
• Accessory box with screws and mounting hardware

Figur 2: Eksploderet view showing the main components of the Jonsbo N10 case.

4. Opsætning og installation

4.1 Komponent overview

The Jonsbo N10 case is designed for Mini-ITX motherboards and compact components. Familiarize yourself with the internal layout before beginning assembly.

Figur 3: Intern view of the Jonsbo N10 case, illustrating component placement.

4.2 Installation af bundkort

1. Fjern sidepanelerne på kabinettet.
2. Install your Mini-ITX motherboard into the designated area. Ensure the I/O shield is properly seated.
3. Fastgør bundkortet med de medfølgende skruer.
4. Install your CPU and CPU cooler. Note that the maximum CPU cooler height supported is 38 mm. This case is optimized for CPUs with integrated graphics (iGPU) and does not support dedicated graphics cards.

4.3 Opbevaringsinstallation

The Jonsbo N10 supports up to four 2.5-inch SSDs or HDDs.

1. Locate the 2.5-inch drive bays. These are typically found on a removable bracket or directly on the chassis.
2. Mount your 2.5-inch SSDs or HDDs onto the bracket using the provided screws.
3. Secure the bracket back into the case.

Figure 4: Installation process for 2.5-inch storage drives.

4.4 Installation af strømforsyning

The case supports 1U-Flex power supplies up to 150 mm in length.

1. Identify the power supply mounting area, typically at the bottom of the case.
2. Slide the 1U-Flex power supply into its designated slot.
3. Fastgør strømforsyningen med skruer fra bagsiden af ​​kabinettet.
4. Connect the necessary power cables to your motherboard and storage devices.

Figure 5: Power supply unit installation guide.

4.5 Ventilatortilslutninger

The Jonsbo N10 comes with two pre-installed cooling fans. Connect their power cables to the appropriate fan headers on your motherboard.

4.6 Kabelstyring

Due to the compact nature of the case, careful cable management is crucial for optimal airflow and aesthetics. Route cables neatly using zip ties or Velcro straps where possible.

5. Betjeningsvejledning

Once all components are installed and secured, and all cables are connected:

1. Replace the side panels and secure them.
2. Tilslut din skærm, tastatur, mus og andet tilbehør.
3. Connect the power cable to the power supply and then to a wall outlet.
4. Press the power button on the front of the case to start your system.

Figur 6: Øverst view of the Jonsbo N10, highlighting the power button and front panel.

6. Vedligeholdelse

• Rensning: Rengør regelmæssigt ydersiden af ​​kabinettet med en blød, tør klud. Brug trykluft til forsigtigt at rense ventilationsåbninger og komponenter, hvis der ophobes støv indeni. Sørg for, at systemet er slukket og frakoblet, før du rengør det.
• Ventilatortjek: Periodically check the pre-installed fans for dust buildup or unusual noises. Clean them as needed to maintain optimal airflow.
• Ventilation: Ensure that the case's ventilation holes are not obstructed to allow for proper heat dissipation.

7. Fejlfinding

• Systemet tænder ikke: Double-check all power connections, including the power supply to the wall, the motherboard 24-pin connector, and the CPU power connector. Ensure the power button cable is correctly connected to the motherboard.
• For meget støj fra ventilatoren: While the case includes pre-installed fans, some users may find them audible. If fan noise is a concern, consider replacing the pre-installed fans with quieter aftermarket alternatives (e.g., Noctua fans). Ensure fans are free of dust and properly secured.
• Overophedning: Verify that all fans are spinning correctly and that the case's ventilation is unobstructed. Ensure your CPU cooler is properly seated and making good contact with the CPU.
• USB-porte virker ikke: Check the internal USB 3.0 header connection from the front panel to the motherboard.

8. Specifikationer

9. Garanti og support

The Jonsbo N10 PC Case comes with a 2 års produktgaranti. For technical support, warranty claims, or further assistance, please contact your retailer or visit the official Jonsbo webwebsted. Gem venligst din købsbevis af garantihensyn.