ORIA Digital Fridge Thermometer User Manual

1. Introduktion

The ORIA Digital Fridge Thermometer is designed to monitor temperatures in refrigerators, freezers, and indoor environments. It features a main display unit and two wireless sensors, providing real-time temperature and humidity readings, along with alarm functions for temperature deviations.

Image: The main display unit and two wireless sensors (labeled 1 and 2) of the ORIA Digital Fridge Thermometer.

2. Pakkens indhold

• 1 x Hoveddisplayenhed
• 2 x Wireless Sensors
• 1 x USB Cable (for main unit power)
• 1 x brugermanual

Note: AAA batteries are required for operation and are not included in the package. The main unit requires 2 AAA batteries or USB power. Each sensor requires 2 AAA batteries.

3. Produktet er slutview

Hoveddisplayenhed

The main unit features a 3.42-inch color screen displaying temperatures from both wireless sensors (CH1, CH2) and the indoor temperature/humidity. It includes buttons for settings and a touch-sensitive area for backlight control and unit switching.

Billede: Bagside view of the main display unit, highlighting the CH1, CH2, +/MEM, and /RF buttons, along with the hang hole, magnet, USB power port, stand, and battery compartment.

Trådløse sensorer

Two independent wireless sensors are included to monitor temperatures in separate locations, such as a refrigerator and a freezer. Each sensor is compact and battery-powered.

Image: Illustrates the dimensions of the main unit (8.2cm x 8.2cm) and a wireless sensor (5.2cm x 7.5cm). Icons indicate features like Easy to Set, Dual-Channel, MAX/MIN Record, Temperature Alarm, Backlight, and Dual Power Supply.

4. Opsætning

4.1 Batteriinstallation

1. Hoveddisplayenhed: Open the battery compartment on the back. Insert 2 AAA batteries, observing polarity. Alternatively, connect the main unit using the provided USB cable for continuous power and backlight.
2. Trådløse sensorer: Open the battery compartment on each sensor. Insert 2 AAA batteries into each sensor, observing polarity.

4.2 Parring af sensorer

The main unit and sensors should automatically pair upon battery installation. If pairing does not occur or is lost:

• Ensure both the main unit and sensors have fresh batteries.
• Place the sensors close to the main unit.
• On the main unit, long press the /RF button to initiate re-pairing. The screen will display the alarm symbol. Press again to clear previous connection data and re-scan.

5. Betjeningsvejledning

5.1 Button Functions (Rear of Main Unit)

• CH1 Button:
  • Short press: Toggle CH1 alarm ON/OFF. An alarm symbol appears when active.
  • Long press: Set CH1 alarm temperature (maximum and minimum values). Use +/- buttons to adjust. Configurable range: -40°C to 60°C (-40°F to 140°F).
• CH2 Button:
  • Short press: Toggle CH2 alarm ON/OFF. An alarm symbol appears when active.
  • Long press: Set CH2 alarm temperature (maximum and minimum values). Use +/- buttons to adjust. Configurable range: -40°C to 60°C (-40°F to 140°F).
• +/MEM Button:
  • Short press: Switch between 24H and ALL TIME logging modes to display highest and lowest recorded values.
  • Long press: Clear the history protocol for the currently displayed mode.
• /RF Button:
  • Short press: Display the set alarm values for both channels (alarm symbol appears). Default values are 60°C (max) and -40°C (min).
  • Long press: Re-pair the screen with sensors. Press again to remove previous connector data and initiate a new scan.

5.2 Light/°C/°F Button (Top Touch Area)

Image: A hand interacting with the top touch area of the main unit, demonstrating backlight activation and temperature unit switching.

• Baggrundsbelysning:
  • Battery mode: Short press to turn on the backlight for 8 seconds (automatic shutdown to save energy).
  • USB mode: Short press to toggle the backlight ON/OFF. When ON, it stays illuminated.
• Temperaturenhed (°C/°F): Long press for 2 seconds to switch between Celsius (°C) and Fahrenheit (°F).

5.3 Alarmfunktion

When the temperature measured by a sensor exceeds the set maximum or falls below the set minimum, the device will trigger a continuous audible alarm and the backlight will flash red. This provides an immediate warning to protect stored items.

Image: Comparison of the normal display and the alarm display, which shows a red backlight and an alarm bell icon when a temperature threshold is exceeded.

6. Funktioner

• Dual Channel Monitoring: Equipped with two independent wireless sensors to simultaneously monitor temperatures in two separate locations (e.g., fridge and freezer).
• Clear Color Display: A 3.42-inch color screen with white backlight ensures easy readability of all data, even in low light conditions.
• Adjustable Temperature Alarm: Set custom high and low temperature alarms for each sensor. An audible alarm and flashing red backlight activate if temperatures exceed or fall below these thresholds.
• Maks./min. temperatur- og fugtighedsregistreringer: Displays the highest and lowest recorded temperatures and humidity for the last 24 hours or since the last reset.
• Indendørs overvågning: The main unit also monitors the ambient indoor temperature (-10°C to 60°C / -14.2°F to 140°F) and humidity (10% to 99% RH) where it is placed.
• Wide Outdoor Temperature Range: Wireless sensors monitor temperatures from -40°C to 60°C (-40°F to 140°F).
• Stable Wireless Transmission: Provides a stable wireless range of up to 100 meters (328 feet) in open areas.
• Dobbelt strømforsyning: The main unit can be powered by 2 AAA batteries or a USB cable. Sensors are powered by 2 AAA batteries each.
• Advarsel om lavt batteri: Indicates when batteries are running low.

7. Placering og installation

Hoveddisplayenhed

The main unit offers multiple placement options:

• Stå: Use the integrated foldable stand for tabletop placement.
• Vægbeslag: Utilize the hang hole on the back to mount it on a wall.
• Magnetisk fastgørelse: The magnetic back allows attachment to metallic surfaces, such as a refrigerator door.

Trådløse sensorer

Place the wireless sensors in the desired monitoring locations, such as inside a refrigerator or freezer. Ensure they are positioned to avoid direct contact with food or ice, which could affect readings. The sensors also have a hang hole for wall mounting.

Image: A wireless sensor placed inside a refrigerator, illustrating its remote monitoring capability. The main unit is shown outside the fridge.

8. Specifikationer

9. Fejlfinding

• Ingen skærm/lavt batteri: Check battery installation and replace with fresh AAA batteries. If using USB power for the main unit, ensure the cable is securely connected.
• Sensorer forbinder ikke: Ensure sensors are within range (up to 100m in open areas, less with obstructions). Re-pair by long pressing the /RF knappen på hovedenheden.
• Upræcise læsninger: Ensure sensors are not in direct contact with cold surfaces or food, which can affect readings. Allow time for temperatures to stabilize after placement.
• Alarm virker ikke: Verify that the alarm is enabled for the respective channel (CH1/CH2) and that the alarm thresholds are set correctly.
• Problemer med baggrundsbelysning: In battery mode, the backlight turns off after 8 seconds to save power. For continuous backlight, use USB power.

10. Garanti og support

ORIA provides a 1-year warranty for this product, allowing for replacement within 365 days of purchase. Additionally, lifetime after-sales service is available for all customers. For support or warranty claims, please contact ORIA customer service through your purchase platform.