Indledning
Thank you for choosing the DIYtoolifz 1/2 Inch 1700 Ft-Lbs Cordless Impact Wrench. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.
Generelle sikkerhedsoplysninger
Always wear appropriate personal protective equipment (PPE) such as safety glasses, gloves, and hearing protection when operating power tools. Ensure your work area is well-lit and clear of obstructions. Keep children and bystanders away while operating the tool. Disconnect the battery pack before making any adjustments, changing accessories, or storing the tool. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
Hvad er der i æsken
Your DIYtoolifz Cordless Impact Wrench kit includes the following components:
- 1 x DIYtoolifz 1/2 Inch 1700 Ft-Lbs Cordless Impact Wrench (Battery Not Included)
- 6 x slagtoppe (17 mm, 18 mm, 19 mm, 21 mm, 22 mm, 24 mm)
- 1 x Holdbart opbevaringsetui
- 1 x Brugermanual (dette dokument)
Opsætning
Installation af batteri
This cordless impact wrench is compatible with Milwaukee 18V batteries, including models such as 48-11-1820, 48-11-1828, 48-11-1841, 48-11-1850, 48-11-1862, and 48-11-1880. For optimal performance, a battery of 4Ah or higher is recommended. To install the battery, align the battery pack with the base of the tool and slide it in until it clicks securely into place. To remove, press the battery release button and slide the battery pack out.
Fatning
Select the appropriate impact socket for your task. Align the square drive of the socket with the anvil of the impact wrench and push it firmly until it locks into place. To remove the socket, pull it off the anvil while ensuring the tool is powered off.
Betjeningsvejledning
Tænd/sluk og hastighedskontrol
The tool features a variable speed trigger. Press the trigger to start the tool; the speed increases as you press the trigger further. The impact wrench offers 4-speed settings, allowing for precise control from 0-1850 RPM. Use the speed selection button, typically located near the battery indicator, to cycle through the different speed modes to match the application requirements.
Frem/tilbage-tilstand
A directional switch, usually located above the trigger, allows you to select forward (tightening) or reverse (loosening) rotation. Ensure the switch is in the desired position before operating the tool. The tool also features an auto-stop function in reverse mode to prevent over-loosening or accidental ejection of fasteners.
LED arbejdslys
The integrated LED work light illuminates your work area, providing better visibility in dimly lit or confined spaces. The light activates automatically when the trigger is pressed.
Opretholdelse
Regelmæssig vedligeholdelse sikrer dit værktøjs levetid og optimale ydeevne.
- Rensning: Keep the tool's ventilation openings clear and free of dust and debris. Use a soft, damp klud til at rengøre huset. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
- Opbevaring: Store the impact wrench and its accessories in the provided durable storage case in a dry, secure location away from direct sunlight and extreme temperatures.
- Batteripleje: Always store batteries in a cool, dry place. Do not store batteries in a discharged state for extended periods.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Værktøjet starter ikke | Batteriet er ikke installeret korrekt eller afladet. | Sørg for, at batteriet er fuldt opladet og korrekt isat. |
| Lav effekt/drejningsmoment | Battery charge is low or incorrect speed setting. | Genoplad batteriet. Vælg en højere hastighedsindstilling. |
| Socket falls off | Socket not fully engaged or worn anvil. | Push socket firmly onto anvil until it locks. Inspect anvil for wear. |
Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | DIY-værktøj |
| Modelnummer | Trådløs slagnøgle |
| Drevstørrelse | 1/2 tomme |
| Max løsnemoment | 1700 Ft-Lbs |
| Max tilspændingsmoment | 1350 Ft-Lbs |
| Hastighed uden belastning | 0-1850 RPM (4-Speed) |
| Motortype | Børsteløs |
| Voltage | 18 Volts (Compatible with Milwaukee 18v batteries) |
| Materiale | Krom vanadium stål |
| Varens vægt | 5 pund |
| Varelængde | 11.81 tommer |
| Inkluderede komponenter | Impact Wrench, 6 Sockets, Storage Case |
| LED lys | Ja |
Garanti og support
For any questions, technical support, or warranty inquiries, please contact our customer support team. We are committed to providing dependable customer support to ensure your satisfaction with DIYtoolifz products.
Kontakt email: support@diytolifz.com