LogiLink UA0440 USB-C 3.2 Gen 1 Hub with Gigabit Ethernet and 3 USB-A Ports

Indledning

The LogiLink UA0440 USB-C Gigabit Ethernet Adapter with 3-port hub provides seamless Gigabit network connectivity and expands your device's connectivity with three additional USB-A ports. This adapter is designed for use with USB-A and USB-C compatible devices such as smartphones, tablets, laptops, and desktop computers.

It supports network speeds up to 1 Gbps and is backward compatible with 10/100 Mbps networks. The USB 3.2 Gen 1 specification ensures data transfer speeds of up to 5 Gbps and is compatible with Thunderbolt 3/4 technology. Its ultra-slim aluminum body makes it suitable for travel. The device offers Plug & Play functionality, ready for immediate use with Windows, macOS, iOS, Linux, Chrome OS, and Android operating systems.

Pakkens indhold

• 1x LogiLink UA0440 USB-C 3.2 Gen 1 Hub with Gigabit Ethernet and 3 USB-A Ports
• 1x brugermanual

Funktioner

• 2-in-1 USB-A and USB-C Connector: Offers broad compatibility with various devices. Input connector: USB-A/USB-C male.
• Flere porte: Includes 3x USB-A 3.0 ports and 1x RJ45 Gigabit Ethernet port.
• Højhastighedsdataoverførsel: Complies with USB 3.2 Gen 1 specifications, supporting speeds up to 5 Gbps. Compatible with Thunderbolt 3/4.
• gigabit ethernet: Supports full-duplex mode and VLAN tagging for network connectivity up to 1 Gbps.
• LED-indikator: For RJ45 Ethernet connection status.
• Bred kompatibilitet: Supports Windows, macOS, iPadOS, iOS, Linux, Chrome OS, and Android.
• Holdbart design: Features an aluminum housing in silver color.

Opsætning

1. Tilslut hubben til din enhed:

   Identify the appropriate port on your host device (laptop, tablet, smartphone, etc.). The LogiLink UA0440 features a unique 2-in-1 cable with both a USB-C connector and an attached USB-A adapter.

   • If your device has a USB-C port, connect the USB-C end of the hub's cable directly into the USB-C port.
   • If your device has a standard USB-A port, attach the USB-A adapter to the USB-C connector, then plug the combined USB-A connector into your device's USB-A port.

   

   

2. Driver installation: The LogiLink UA0440 is a Plug & Play device. No additional drivers are typically required for most supported operating systems (Windows, macOS, iOS, Linux, Chrome OS, Android). Your system should automatically detect and configure the device.
3. Bekræft forbindelsen: Once connected, the LED indicator on the RJ45 port will illuminate when an active Ethernet connection is established.

Betjeningsvejledning

After successful setup, the LogiLink UA0440 hub is ready for operation.

1. Using the USB-A 3.0 Ports:

   Connect your USB-A peripherals (e.g., flash drives, external hard drives, keyboards, mice, printers) to the three available USB-A 3.0 ports on the hub. These ports support data transfer speeds up to 5 Gbps.
2. Using the Gigabit Ethernet Port:

   Connect a standard RJ45 Ethernet cable from your router, modem, or network switch to the RJ45 port on the hub. The LED indicator on the RJ45 port will show the network status (link and activity).

   

   Ensure your host device's network settings are configured to use the Ethernet adapter if it doesn't automatically switch from Wi-Fi.

Opretholdelse

• Rensning: Use a soft, dry cloth to clean the surface of the hub. Avoid using liquid cleaners or solvents, as they may damage the aluminum finish or internal components.
• Opbevaring: Når hubben ikke er i brug, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.
• Håndtering: Handle the device with care. Avoid dropping it or subjecting it to strong impacts. Do not attempt to disassemble the hub, as this will void any warranty.

Fejlfinding

• Ingen strøm/enhed ikke genkendt:
  • Ensure the hub is securely connected to your host device's USB-C or USB-A port.
  • Prøv at tilslutte hubben til en anden USB-port på din værtsenhed.
  • Test the hub on another compatible device to rule out an issue with the host device.
• Problemer med Ethernet-forbindelse:
  • Check if the Ethernet cable is securely connected to both the hub and your router/modem.
  • Verify that the LED indicator on the RJ45 port is active. If not, try a different Ethernet cable.
  • Ensure your network router/modem is functioning correctly.
  • Check your host device's network settings to ensure the Ethernet adapter is enabled and configured correctly.
• USB-enheder virker ikke:
  • Ensure the USB device is properly inserted into the hub's USB-A port.
  • Try connecting the USB device to a different USB-A port on the hub.
  • Connect the USB device directly to your host device (if possible) to confirm it is functional.
  • Some high-power USB devices may require more power than the hub can provide without an external power source (this hub does not have an external power input, so ensure your host device can supply sufficient power).

Specifikationer

Garantioplysninger

LogiLink products are designed and manufactured to the highest quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official LogiLink webwebsted. Gem din købsbevis til garantikrav.

Kundesupport

If you encounter any issues or have questions regarding your LogiLink UA0440 hub that are not covered in this manual, please contact LogiLink customer support. Contact information can typically be found on the product packaging or the official LogiLink webwebsted.

Webwebsted: www.logilink.eu (Eksample, faktisk URL kan variere)