VASAGLE URMB604W01V1 King Size Hydraulic Lift-Up Storage Bed Frame Instruction Manual
Model: URMB604W01V1
Mærke: VASAGLE
Vigtige sikkerhedsoplysninger
Læs og forstå venligst alle instruktioner før montering og brug. Gem denne manual til senere brug.
- Følg altid samlevejledningen nøje for at forhindre ustabilitet eller sammenstyrtning.
- Belast ikke sengerammen med mere end 1100 pund.
- Be cautious around the hydraulic lift mechanism to avoid potential injury.
- Keep the upholstered headboard away from open flames and high heat sources to prevent fire.
- Always supervise children around the bed frame to prevent accidents.
Pakkens indhold
Verify all components are present before beginning assembly. Refer to the included assembly kit for detailed part identification.
- 1 x King Bed Frame (disassembled components)
- 1 x Assembly Kit (screws, washers, tools)
- 1 x Brugsanvisning (dette dokument)
Monteringsvejledning
Assembly typically requires two adults. Ensure you have adequate space and all tools provided.
Trin 1: Samling af sengegavl
Attach the headboard components as shown in the diagram. Ensure all screws are tightened securely.

Billede: Detaljeret view of headboard components being connected.
Video: "Watch This BEFORE You Assemble Your Bed Frame!" - This video provides a comprehensive guide to assembling the bed frame, including the headboard. It covers component checks and initial assembly steps.
Trin 2: Samling af sengeramme
Connect the side rails and support beams to form the main bed frame structure. Ensure all connections are firm.

Image: Assembly of the bed frame's main structure, showing side rails and central supports.
Step 3: Hydraulic Lift Assembly
Install the hydraulic lift mechanism onto the bed frame. Ensure the hydraulic arms are correctly oriented and secured. Test the lift after full assembly.

Image: Installation process of the hydraulic lift system onto the bed frame.
Video: "Hydraulic Lift Assembly" - This video demonstrates the correct procedure for installing the hydraulic lift components.
Step 4: Slats Installation
Place the wooden slats onto the bed frame. Ensure they are evenly spaced and securely fitted into their designated slots. The snap-on design facilitates easy installation.

Image: Visual guide for installing the wooden slats, highlighting the snap-on mechanism.
Betjeningsvejledning
Using the Hydraulic Lift and Storage
To access the under-bed storage, gently lift the mattress platform from the foot end of the bed. The hydraulic mechanism will assist in raising and holding the platform in place. To close, gently push the platform down until it locks securely.
The spacious under-bed area is designed to hold items such as extra bedding, luggage, or seasonal clothing, helping to keep your bedroom organized.

Image: A person lifting the bed platform to reveal the under-bed storage compartment.
Video: "Lift Up Storage Bed Frame, Hydraulic Platform Bed" - This video showcases the functionality of the hydraulic lift and the ample storage space provided.
Opretholdelse
- Rensning: Wipe the bed frame with a dry cloth. For the upholstered headboard, spot clean with a mild fabric cleaner if necessary.
- Hydrauliksystem: Periodically check the hydraulic lift mechanism for smooth operation. Ensure all connections are tight.
- Lameller: Inspect wooden slats for any damage or displacement. Replace damaged slats immediately to maintain mattress support.
- Headboard Creases: If creases appear on the headboard, use a steamer iron or gently pat the fabric and allow 48 hours for it to smooth out.

Image: Visual guide on how to smooth out creases from the upholstered headboard.
Fejlfinding
- Knirkende lyde: Ensure all screws and bolts are tightened. EVA pads between the frame and slats are designed to prevent creaks; check if they are properly in place.
- Hydraulic Lift Malfunction: If the hydraulic lift is difficult to operate or does not hold, ensure the mattress is properly positioned and its weight is within the specified lifting capacity (up to 176 lb). If the frame is misaligned, return to the previous assembly step to adjust the screws.
- Manglende dele: If any components are missing upon arrival, contact customer support immediately with your purchase details.
Specifikationer
| Feature | Detalje |
|---|---|
| Størrelse | Konge |
| Modelnummer | URMB604W01V1 |
| Materiale | Steel, Plywood, Particleboard, 24D High-Density Foam, Linen-Like Fabric |
| Produktdimensioner | 83.4 cm L x 77.7 cm B x 43.3 cm H |
| Vægt kapacitet | 1100 lb |
| Hydraulic Lift Capacity | Op til 176 lb (80 kg) |
| Særlige funktioner | Easy Assembly, No Box Spring Needed, Space Saving, Squeak Resistant, Upholstered Headboard |
Garanti og support
This product is sold by SONGMICS HOME US and typically includes a 90-day easy return policy. For specific warranty details, product support, or to report missing parts, please contact the seller directly through your purchase platform.
Kontaktoplysninger: Refer to your purchase receipt or the seller's page on Amazon for the most up-to-date contact details.
Online ressourcer: For additional assembly tips and product information, visit the official VASAGLE store on Amazon: VASAGLE Store