WALI Vertical Dual Monitor Wall Mount (Model 012ARMV-49) Instruction Manual

1. Introduktion og produktoversigtview

This manual provides detailed instructions for the installation, operation, and maintenance of your WALI Vertical Dual Monitor Wall Mount, Model 012ARMV-49. This mount is designed to support two monitors in a stacked configuration, optimizing desk space and providing ergonomic viewing vinkler.

The mount supports displays from 17 to 49 inches, with a maximum weight capacity of 44 lbs (20 kg) per arm. It is compatible with VESA 75x75mm and 100x100mm mounting patterns. Key features include flexible tilt, swivel, and height adjustments, along with 360-degree rotation for versatile screen positioning.

Figure 1: WALI Vertical Dual Monitor Wall Mount with two curved monitors.

2. Sikkerhedsoplysninger

Læs og forstå alle instruktioner før installation og brug. Undladelse af at gøre dette kan medføre personskade eller materielle skader. Gem denne manual til senere brug.

• Vægt kapacitet: Do not exceed the maximum weight capacity of 44 lbs (20 kg) per monitor. Exceeding this limit can result in serious injury or product failure.
• Skærmstørrelse: Ensure your monitors are within the supported size range of 17-49 inches.
• VESA-kompatibilitet: Verify your monitor's VESA mounting pattern (75x75mm or 100x100mm) before installation.
• Vægtype: This mount is designed for installation on concrete/brick walls or wooden studs. Do not install on drywall alone.
• Professionel installation: Hvis du er usikker på installationsprocessen eller vægtypen, skal du kontakte en kvalificeret fagmand.
• Bevægelige dele: Hold hænder og fingre væk fra bevægelige dele under justering for at undgå klemning.
• Børn: Hold små dele og emballagematerialer væk fra børn, da de kan udgøre en kvælningsfare.

3. Pakkens indhold

Verify that all components are present and undamaged. If any parts are missing or damaged, contact WALI customer support.

• 1 x WALI Vertical Dual Monitor Wall Mount (Black)
• Mounting Hardware Kit (includes screws, washers, wall anchors for masonry, and self-tapping screws for wood)
• Brugermanual

4. Specifikationer

5. Opsætning og installation

Follow these steps carefully to install your WALI Vertical Dual Monitor Wall Mount.

5.1 Forberedelse af væggen

• Identificer vægtype: This mount is suitable for wooden studs, solid concrete walls, and brick walls.
• Find stolper (til trævægge): Use a stud finder to locate the center of a wooden stud. Mark the drilling locations.
• Markér boresteder: Hold the wall plate against the wall at your desired height and mark the screw holes. Ensure it is level.

Figure 2: Wall compatibility for installation.

5.2 Attaching the Wall Plate

• Bor pilothuller: Bor forboringshuller på de markerede steder. Størrelsen på boret afhænger af din vægtype og de medfølgende beslag.
• Sikker vægplade: Attach the wall plate to the wall using the appropriate screws and anchors for your wall type. Ensure it is firmly secured.

Figure 3: Securing the wall mount plate.

5.3 Attaching VESA Plates to Monitors

• Remove Original Stand: Carefully remove the original stand from your monitors.
• Fastgør VESA-plade: Align the VESA plate with the mounting holes on the back of your monitor. Use the provided screws to secure the plate. Ensure the plate is oriented correctly for vertical stacking.

5.4 Mounting Monitors to the Arm

• Slide Arm onto Wall Base: Carefully slide the monitor arm assembly onto the secured wall base.
• Attach Monitors: With assistance, carefully lift each monitor and slide its VESA plate onto the corresponding arm bracket. Ensure it clicks securely into place.
• Secure Monitors: Use the safety screws or clips to prevent accidental dislodgement of the monitors from the arms.

Figure 4: Monitor arm assembly and attachment points.

5.5 Kabelstyring

• Rute kabler: Utilize the integrated cable management system to route monitor cables neatly along the arm and down the wall pole.
• Sikre kabler: Use the provided clips or ties to secure the cables, preventing clutter and ensuring a clean setup.

Figur 5: Integreret kabelhåndteringssystem.

6. Betjeningsvejledning (Justeringer)

The WALI Vertical Dual Monitor Wall Mount offers various adjustments for optimal viewkomfort.

• Højdejustering: The monitors can be adjusted vertically along the main pole. Loosen the adjustment screws on the arm brackets, slide the monitors to the desired height, and then re-tighten the screws. The maximum height adjustment is 28.74 inches.
• Justering af hældning: Tilt the monitors up to +50 degrees or down to -20 degrees to reduce glare and find your preferred viewvinkel.
• Drejejustering: Swivel the monitors up to +/-90 degrees horizontally for collaborative work or to adjust the viewing retning.
• Rotation: Rotate the monitors 360 degrees to switch between landscape and portrait orientations.

Figure 6: Tilt, Swivel, and Rotation adjustments.

Figure 7: Full motion adjustment range and dimensions.

7. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din skærmbeslags levetid og sikker drift.

• Rensning: Tør holderen af ​​med en blød kludamp klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Tjek tæthed: Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de er stramme og sikre. Spænd igen om nødvendigt.
• Undersøg for skader: Regularly inspect the mount for any signs of wear, damage, or corrosion. Discontinue use and contact support if any issues are found.

8. Fejlfinding

If you encounter issues with your WALI Vertical Dual Monitor Wall Mount, refer to the following common problems and solutions:

• Overvågningen sænker sig eller holder ikke positionen:
  • Ensure the monitor weight is within the 44 lbs (20 kg) per arm limit.
  • Tighten the tension adjustment screws on the arm joints using the included tool.
• Mount føles ustabil:
  • Verify that the wall plate is securely fastened to the wall with appropriate anchors for your wall type.
  • Check that all connections between the arm and the VESA plates are tight.
• Difficulty Adjusting Monitor Position:
  • Loosen the tension adjustment screws slightly if the movement is too stiff.
  • Ensure no cables are obstructing the movement of the arms.

9. Garanti og support

Your WALI Vertical Dual Monitor Wall Mount comes with a 10-års garanti, der dækker defekter i materialer og udførelse ved normal brug.

For technical assistance, missing parts, or warranty claims, please contact WALI customer support. Our experienced and friendly US-based customer support team is available to assist you 7 days a week.

Kontaktoplysninger: Refer to the WALI webwebstedet eller produktemballagen for de mest aktuelle kontaktoplysninger.