FEELNEEDY Replacement Filters and Pump Sponges for Cat Water Fountain FN-W17 Instruction Manual

Indledning

This manual provides essential instructions for the proper use and maintenance of your FEELNEEDY Replacement Filters and Pump Sponges, designed for the FN-W17 Cat Water Fountain. Regular replacement ensures optimal water quality for your pet.

Pakkens indhold

• 6 x Replacement Filter Elements
• 6 x Dedicated Pump Sponges

Image: Packaging of the FEELNEEDY Replacement Filters and Pump Sponges, showing 6 filters and 6 sponges.

Kompatibilitet

These replacement filters and pump sponges are specifically designed for use with the FEELNEEDY Cat Water Fountain model FN-W17 (108oz/3.2L capacity). Ensure your fountain model matches for proper fit and function.

Image: Diagram illustrating the compatibility of the replacement filter with the FEELNEEDY FN-W17 Pet Water Fountain, including dimensions.

Opsætning og indledende forberedelse

Before installing a new filter, follow these steps:

1. Blødgør filteret: Submerge the new filter element in clean water for 5 minutes. This helps to remove any loose carbon particles and ensures optimal filtration from the first use.
2. Skyl grundigt: After soaking, rinse the filter thoroughly under running water for at least 15 seconds.

Image: Visual guide showing the steps to soak and rinse the filter before use.

Vedligeholdelse og udskiftning

Regular replacement of both the filter element and pump sponge is crucial for maintaining water quality and the longevity of your pet fountain.

Udskiftningscyklus

It is recommended to replace the filter element and pump sponge every 2 til 4 uger. This frequency may vary depending on the number of pets using the fountain and the hardness of your water.

Sådan udskiftes

1. Turn off and unplug the fountain.
2. Disassemble the fountain components according to your specific FN-W17 fountain manual.
3. Remove the old filter element and pump sponge. Dispose of them properly.
4. Insert the new, pre-soaked and rinsed filter element into its designated slot.
5. Place the new pump sponge around the pump.
6. Reassemble the fountain, refill with fresh water, and plug it back in.

Image: Visual representation of a hand replacing the filter element in the pet water fountain.

Image: Diagram illustrating the correct placement of the pump sponge around the fountain pump.

Filtration System Details

The FEELNEEDY replacement filters feature a 4-level deep filtration system designed to provide clean and fresh water for your pets:

• High-Density Cotton: Acts as a pre-filter to intercept larger impurities like hair and debris.
• Ionbytterharpiks: Softens water by reducing calcium and magnesium ions, preventing scale buildup.
• Coconut Shell Activated Carbon: Efficiently adsorbs odors, chlorine, and other organic contaminants.
• Medical Stone: Further purifies water by absorbing bacteria and impurities.

The pump sponges provide an additional layer of pre-filtration, protecting the pump from larger particles and extending its lifespan.

Billede: Eksploderet view diagram detailing the four layers of the filtration system: high-density sponge, ion exchange resin, activated carbon, and medical stone.

Specifikationer

Fejlfinding

If you experience issues with water flow or quality after replacing filters:

• Kontroller filterplacering: Ensure the filter is correctly seated in its designated slot.
• Verify Sponge Placement: Make sure the pump sponge is properly installed around the pump.
• Skyl igen: If water flow is reduced, remove and re-rinse the filter and sponge to dislodge any trapped particles.
• Rens pumpe: Refer to your fountain's instruction manual for pump cleaning procedures, as debris can accumulate over time.

Støtte

For further assistance or inquiries regarding your FEELNEEDY products, please refer to the contact information provided with your original FEELNEEDY Cat Water Fountain purchase or visit the official FEELNEEDY webwebsted.

E-mail: support@feelneedy.com