ASMAX T20 Multi-Function Jump Starter and Air Compressor User Manual

1. Introduktion

The ASMAX T20 is a versatile and essential tool designed for automotive and outdoor use. It integrates a powerful 4000A peak current jump starter, a 150 PSI air compressor, a 12000mAh power bank, and an emergency LED flashlight. This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your ASMAX T20 device. Please read this manual thoroughly before first use and retain it for future reference.

2. Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af enheden.

Generel sikkerhed: Keep the device away from children. Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Store in a cool, dry place.
Sikkerhed ved start med kabler:
- Sørg for korrekt polaritet ved tilslutning af clamps (red to positive, black to negative). Incorrect connection can cause sparks or damage.
- Wear eye protection and gloves when jump starting.
- Tillad ikke den røde og sorte clamps to touch each other, as this can cause a short circuit.
- Forsøg ikke at sætte gang i et frosset batteri.
- Sørg for, at køretøjets tænding er slukket, før du tilslutter jumpstarteren.
Sikkerhed i luftkompressoren:
- Do not overinflate tires or other items. Always check the recommended pressure for the item being inflated.
- Overvåg trykmåleren under oppumpning for at undgå at overskride det maksimale tryk.
- Luftslangen kan blive varm ved længere tids brug. Håndter den forsigtigt.
Batterisikkerhed:
- Do not disassemble, modify, or immerse the device in water.
- Charge the device only with the provided USB-C cable.
- Undgå at udsætte enheden for ekstreme temperaturer (under -20 °C eller over 45 °C).
- If the battery swells, leaks, or emits an odor, discontinue use immediately.

The ASMAX T20 incorporates 10 levels of safety protection, including spark-proof, reverse polarity, short circuit, overload, over-voltage, over-current, high/low temperature, overcharge, and reverse charge protection, ensuring safe operation.

Diagram illustrating 10 safety protection features of the ASMAX T20 jump starter, including spark-proof, reverse polarity, short circuit, and overcharge protection.

Image: The ASMAX T20 features 10 integrated safety protections for secure operation.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

Arrancador con Compresor de Aire T20 (Jump Starter with Air Compressor T20)
Válvula Schrader Extendida (Extended Schrader Valve)
Aguja para Inflar Balones (Ball Inflation Needle)
Válvula Schrader (Schrader Valve)
Válvula Presta (Presta Valve)
Cable de Carga USB-C (USB-C Charging Cable)
Manguera de Aire Inflable (Inflatable Air Hose)
Cable de Puente de 12V con Pinzas (12V Jumper Cable with Clamps)
Bolsa de Almacenamiento (Storage Bag)
Manual de Usuario (User Manual)

Contents of the ASMAX T20 package, including the main unit, jumper cables, air hose, various nozzles, USB-C cable, and storage bag.

Image: All components included in the ASMAX T20 product box.

4. Produktet er slutview

The ASMAX T20 features a compact design with an intuitive interface. Familiarize yourself with the device's components and controls.

The ASMAX T20 multi-function device, showing its main unit, jumper cables, air hose, and various inflation nozzles.

Image: The ASMAX T20 device and its accessories.

4.1. Hovedenhedens funktioner

Stort LCD-display: Shows real-time tire pressure, battery level, and selected modes.

Close-up of the ASMAX T20's large LCD screen displaying digital readings for PSI, BAR, KPA, and Kg/cm², along with icons for different inflation modes.

Image: The high-definition LCD screen provides clear information.

Kontrolknapper: Intuitive buttons for power, mode selection, and pressure adjustment.
Starthjælpsport: Connects to the 12V jumper cables.
Luftslangeport: Connects the inflatable air hose.
USB-A udgangsport: Til opladning af eksterne enheder (powerbank-funktion).

The ASMAX T20 device being used as a power bank, charging a smartphone via its USB-A output port.

Image: The ASMAX T20 functions as a 12000mAh power bank.

USB-C indgangsport: For charging the ASMAX T20 device.
LED lommelygte: Integrated high-intensity LED light with multiple modes.

A person using the ASMAX T20's integrated LED flashlight to illuminate a car engine bay, showing its constant, intermittent, and SOS modes.

Image: The device includes a powerful LED emergency light.

5. Specifikationer

Feature	Specifikation
Maksimal strøm	4000A
Trykområde	2-150 PSI / 0.1-10.3 BAR
Luftstrøm	28 l/min
Driftstemperaturområde	-20°C til 45°C (-4°F til 113°F)
Batterikapacitet	12000mAh / 44.4Wh
Input bindtage	5V (USB-C)
Engine Support (Gasoline)	Op til 9.0L
Engine Support (Diesel)	Op til 8.0L
Vehicle Type Compatibility	All 12V vehicles (motorcycles, cars, SUVs, ATVs, vans, trucks, lawnmowers)
Dimensioner	5 x 7.1 x 9 cm
Vægt	700 g

Detailed specifications table for the ASMAX T20, listing maximum current, pressure range, air flow, temperature range, battery capacity, input voltage, and engine support.

Image: Comprehensive specifications of the ASMAX T20.

6. Opsætning

6.1. Første opladning

Before first use, fully charge the ASMAX T20. Connect the provided USB-C charging cable to the device's USB-C input port and a compatible 5V USB power adapter (not included). The LCD display will indicate the charging status. A full charge typically takes 3-4 hours.

7. Betjeningsvejledning

7.1. Start af et køretøj med startkabler

The ASMAX T20 can jump start 12V gasoline vehicles up to 9.0L and diesel vehicles up to 8.0L.

Klargør køretøjet: Sørg for, at køretøjets tænding er slukket, og at parkeringsbremsen er aktiveret.
Connect the Booster: Insert the 12V jumper cable with clamps into the jump start port on the ASMAX T20.

Step-by-step guide for jump starting a vehicle with the ASMAX T20. Shows connecting the booster, connecting clamps to the battery, waiting for the green light, and starting the engine.

Image: Steps for instant vehicle restart using the ASMAX T20.

Tilslut til batteri: Attach the red (positive, +) clamp to the positive terminal of the vehicle's battery. Attach the black (negative, -) clamp til den negative pol på køretøjets batteri. Sørg for en sikker forbindelse.

Close-up of the ASMAX T20's jumper cables connected to a car battery, showing the red clamp på den positive terminal og den sorte terminalamp på den negative terminal.

Image: Proper connection of jumper clamps til et bilbatteri.

Start køretøj: Once connected, the green light on the jumper cable connector will illuminate, indicating a ready state. Start the vehicle's engine. If it doesn't start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds per attempt.
Afbryde: Når køretøjet starter, skal den sorte (negative) kobling straks frakobles.amp først, derefter den røde (positive) clamp. Remove the jumper cable from the ASMAX T20.

The ASMAX T20 jump starter connected to a car battery under the hood, with the air compressor hose connected to a tire, demonstrating its dual functionality.

Image: The ASMAX T20 in use for both jump starting and tire inflation.

7.2. Brug af luftkompressoren

The 150 PSI air compressor can inflate tires, balls, and other inflatables quickly.

Tilslut dyse: Select the appropriate nozzle for your item and securely attach it to the inflatable air hose. Connect the air hose to the air hose port on the ASMAX T20.

Three steps for effortless inflation with the ASMAX T20: connect the appropriate nozzle, long press to select preset mode, and connect to the tire to inflate.

Image: Steps for effortless inflation using the ASMAX T20.

Vælg tilstand og indstil tryk: Turn on the device. Long press the mode button to select from 5 preset modes (balls, bicycles, motorcycles, cars, custom). Use the '+' and '-' buttons to adjust the target pressure. The LCD screen will display the current and target pressure.
Start inflation: Connect the nozzle to the item to be inflated. Press the power button to start inflation. The compressor will automatically stop once the preset pressure is reached.
Afbryde: Disconnect the nozzle from the item and the air hose from the device.

A person relaxing by a lake while the ASMAX T20 air compressor inflates a car tire, highlighting its portability and convenience.

Image: The ASMAX T20 air compressor in use, inflating a tire quickly.

7.3. Brug som powerbank

The 12000mAh battery can charge mobile phones, tablets, and other USB-powered devices.

Tilslut enhed: Connect your electronic device to the USB-A output port of the ASMAX T20 using a compatible USB cable.
Opladning: The ASMAX T20 will automatically begin charging your device. Monitor the charging status on your device's screen.

7.4. Brug af LED-lommelygten

The integrated LED flashlight provides illumination for various situations.

Tænd/sluk: Press the flashlight button to turn the light on or off.
Skift tilstande: Press the flashlight button repeatedly to cycle through the modes: Constant Illumination, Intermittent (Strobe) Mode, and SOS Warning Mode.

8. Vedligeholdelse

Proper maintenance ensures the longevity and optimal performance of your ASMAX T20.

Rensning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all ports are free of dust and debris.
Opbevaring: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. The ideal storage temperature range is between -20°C and 45°C.
Batteripleje: To maintain battery health, it is recommended to fully charge the device every 3-6 months, even if not in use. Do not store the device with a completely depleted battery.
Vedligeholdelse af tilbehør: Keep the jumper cables, air hose, and nozzles clean and free from damage. Store them in the provided storage bag.

9. Fejlfinding

If you encounter issues with your ASMAX T20, refer to the following common problems and solutions:

Problem	Mulig årsag	Løsning
Enheden tændes ikke.	Batteriet er afladet.	Oplad enheden helt med USB-C-kablet.
Køretøjet starter ikke med startkabler.	Forkert klamp forbindelse. Device battery too low. Vehicle battery completely dead (below 50% charge on device required). Vehicle issue not related to battery.	Sørg for, at clamper tilsluttet korrekt (rød til +, sort til -). Ensure device is sufficiently charged (above 50%). For completely dead batteries, ensure device is fully charged and try again. If still no start, consult a mechanic. Check other vehicle systems.
Luftkompressoren puster sig ikke op.	Slangen er ikke sikkert tilsluttet. Dysen er ikke korrekt fastgjort. Target pressure not set. Device battery too low.	Ensure air hose is securely screwed into the device and nozzle. Ensure nozzle is firmly attached to the item. Set a target pressure on the display. Oplad enheden.
LCD-skærmen virker ikke.	Device is off or battery is depleted.	Press the power button to turn on. Charge the device if necessary.
Apparatet bliver varmt under brug.	Normal operation during high load (e.g., prolonged inflation or multiple jump starts).	Allow the device to cool down before continued use. If overheating persists or is excessive, discontinue use and contact support.

If the problem persists after attempting these solutions, please contact ASMAX customer support for assistance.

10. Garanti og support

The ASMAX T20 is designed and manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official ASMAX website. For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact ASMAX customer service through the contact information provided on the product packaging or the official brand webwebsted.

ASMAX T20