AOLIKES VB607 M, BM921 M, BM918
AOLIKES 1200mAh Battery Replacement User Manual
For BOIFUN VB607 M / BM921 M / BM918 Baby Monitors
Indledning
This manual provides essential information for the safe and effective use of your AOLIKES 1200mAh Li-Po Battery Replacement. This battery is specifically designed for compatibility with BOIFUN VB607 M, BM921 M, and BM918 baby monitors, ensuring reliable power for your device.
Sikkerhedsoplysninger
Please read and understand all safety instructions before installing or using the battery. Failure to follow these instructions may result in fire, electric shock, injury, or damage to the product or property.
- Batteriet må ikke skilles ad, knuses, punkteres eller kortsluttes.
- Udsæt ikke batteriet for høje temperaturer (over 60 °C / 140 °F) eller direkte sollys.
- Udsæt ikke batteriet for vand eller andre væsker.
- Hold batteriet væk fra børn og kæledyr.
- Bortskaf brugte batterier i henhold til lokale bestemmelser. Må ikke bortskaffes i husholdningsaffaldet.
- The battery features built-in protection against overcharging, overheating, and short circuits to ensure safe operation.
Kompatibilitet
This 1200mAh Li-Po battery is designed as a direct replacement for the following baby monitor models:
- BOIFUN VB607 M Video Baby Monitor (3.2" Screen)
- BOIFUN BM921 Video Baby Monitor
- BOIFUN BM918 Video Baby Monitor
It is also compatible with battery models Y21kbfaa1, Y20FCEAA1, Y20JAHAA1, and LP62N47-1-43.
Setup (Battery Replacement)
Follow these steps to replace the battery in your compatible baby monitor:
- Sluk for enhed: Ensure your baby monitor is completely powered off and unplugged from any power source.
- Find batterirummet: Identify the battery compartment on your baby monitor. This is typically on the back or bottom of the parent unit.
- Åbent rum: Carefully open the battery compartment cover. This may involve sliding a latch or unscrewing a small screw.
- Fjern det gamle batteri: Gently disconnect the old battery's connector from the monitor's port. Remove the old battery from the compartment.
- Isæt nyt batteri: Connect the new AOLIKES 1200mAh battery's connector to the monitor's port, ensuring the correct orientation. Place the battery securely into the compartment.
- Luk rum: Sæt batterirummets dæksel på igen og fastgør det.
- Indledende opkrævning: It is recommended to fully charge the new battery before its first use. Connect your baby monitor to its power adapter and allow it to charge until the battery indicator shows full.

Image 1: The AOLIKES 1200mAh Li-Po battery replacement. This image shows the battery pack with its label displaying specifications like SN: LP62N47-1-43, Nominal Voltage: 3.7V, Capacity: 1200mAh, Limited Charge Voltage: 4.2V, and Power: 4.44Wh. It also shows the CE, UKCA, and recycling symbols, and "Made in China". The battery has a white connector with red, black, and yellow wires.

Image 2: The AOLIKES 1200mAh battery with text indicating compatibility. The text above the battery reads "1200mAh Battery Compatible with BOIFUN Baby Monitor VB607-M / BM921 / VM918". The battery itself is identical to Image 1, showing its label and connector.
Operating (Battery Usage)
Once installed and fully charged, the battery will power your baby monitor. The monitor's battery indicator will show the current charge level. Recharge the monitor when the battery level is low to ensure continuous operation.
- For optimal ydeevne bør du undgå at aflade batteriet helt før genopladning.
- Use only the original charger provided with your baby monitor to charge the battery.
Opretholdelse
Korrekt vedligeholdelse kan forlænge batteriets levetid:
- Opbevaring: If storing the battery for an extended period, store it in a cool, dry place at approximately 50% charge. Avoid extreme temperatures.
- Rensning: Hold batteriet og dets kontakter rene og tørre. Brug en blød, tør klud til at tørre støv og snavs af.
- Undgå fysisk skade: Beskyt batteriet mod fald, stød og for højt tryk.
Fejlfinding
Hvis du støder på problemer med dit batteri, bør du overveje følgende:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Batteriet oplades ikke. | Incorrect installation, faulty charger, or damaged battery. | Ensure battery is correctly connected. Try a different charger (if available and compatible). If issues persist, the battery may be faulty. |
| Kort batterilevetid. | Battery not fully charged, aging battery, or high power consumption by monitor. | Ensure full charge. Battery capacity naturally degrades over time. Check monitor settings for power-saving options. |
| Monitor not powering on after battery replacement. | Battery not connected, battery completely discharged, or monitor issue. | Verify battery connection. Connect monitor to power adapter to see if it powers on directly. Allow battery to charge for a period. |
Specifikationer
| Attribut | Værdi |
|---|---|
| Batteritype | Lithium Polymer Battery (Li-Po) |
| Kapacitet | 1200mAh |
| Nominel bindtage | 3.7V |
| Limited Charge Voltage | 4.2V |
| Magt | 4.44Wh |
| Cutoff Voltage (Discharged) | 2.95V |
| Dimensioner (ca.) | 2.2 x 1.54 x 0.47 tommer |
| Varens vægt | 1.13 ounce |
Garanti og support
For warranty information or technical support, please contact AOLIKES customer service through the retailer where the product was purchased. Please have your purchase details and product model information ready.
Bemærk: Specifikke garantivilkår kan variere afhængigt af region og forhandler.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.