Produkt overview
This manual provides essential information for the safe and effective use of the AOLIKES 1750mAh Lithium Polymer Battery, designed as a replacement for BOIFUN VB608 M and BM922 M 4.3" Screen Baby Monitors.

Image: The AOLIKES 1750mAh Lithium Polymer Battery, showing its specifications label including model number Y24ACBAA1, nominal voltage 3.7V, capacity 1750mAh, power 6.475Wh, and limited charge voltage 4.2V. The label also includes safety warnings and indicates it is made in China.
Vigtige sikkerhedsoplysninger
Please read and understand all safety warnings before using this product. Failure to follow these instructions may result in fire, electric shock, or other injuries.
- ADVARSEL!!! Potential for fire or burning.
- Skil ikke batteriet ad.
- Du må ikke punktere batteriet.
- Knus ikke batteriet.
- Opvarm ikke batteriet.
- Brænd ikke batteriet.
- Keep the battery away from water and excessive heat.
- Only use the specified charger for the device the battery is intended for.
- Bortskaf batterier korrekt i henhold til lokale regler.
This 3.7V rechargeable Li-Po battery is built with high-quality materials and features built-in protection against overcharging, overheating, and short circuits to ensure optimal operation and eliminate potential hazards.
Opsætning og installation
This battery is designed as a direct replacement for the original battery in compatible baby monitors. Always refer to your baby monitor's original instruction manual for specific battery replacement procedures.
- Sluk for enhed: Ensure your baby monitor is completely powered off and disconnected from any power source before beginning installation.
- Find batterirummet: Identify the battery compartment on your BOIFUN VB608 M or BM922 M baby monitor. This is typically on the back or bottom of the monitor unit.
- Fjern det gamle batteri: Carefully open the battery compartment cover. Disconnect the old battery's connector from the device's port and remove the old battery.
- Isæt nyt batteri: Connect the new AOLIKES 1750mAh battery's connector to the corresponding port in the baby monitor. Ensure the connector is securely seated.
- Batteriposition: Place the new battery into the compartment, ensuring it fits correctly without bending or forcing.
- Luk rum: Sæt batterirummets dæksel på igen og fastgør det.
- Indledende opkrævning: It is recommended to fully charge the new battery before its first use. Connect the baby monitor to its power adapter and allow it to charge until the charging indicator shows a full charge.
Betjeningsvejledning
Once installed, the battery operates as the primary power source for your baby monitor when not connected to an external power adapter.
- Opladning: To charge the battery, connect your baby monitor to its original power adapter. The monitor's charging indicator will typically show the charging status.
- Batterilevetid: Battery life will vary depending on usage patterns, screen brightness, and features enabled on your baby monitor.
- Indikator for lavt batteri: Your baby monitor will provide an indication when the battery level is low, prompting you to recharge.
- Optimal ydeevne: For optimal battery performance, avoid completely draining the battery frequently.
Vedligeholdelse og pleje
Proper care can extend the life of your battery.
- Opbevaring: If storing the battery for an extended period, store it in a cool, dry place at approximately 50% charge. Avoid extreme temperatures.
- Rensning: Hold batterikontakterne rene og fri for støv eller snavs. Brug en tør, blød klud, hvis rengøring er nødvendig.
- Undgå fysisk skade: Do not drop, bend, or expose the battery to strong impacts.
- Temperatur: Operate and charge the battery within the recommended temperature range specified by your baby monitor's manufacturer.
Fejlfinding
Hvis du oplever problemer med dit batteri, kan du overveje følgende almindelige løsninger:
- Batteri oplades ikke:
- Ensure the power adapter is correctly connected to both the monitor and a working power outlet.
- Verify that the battery connector is securely seated within the monitor's battery port.
- Prøv at bruge en anden stikkontakt.
- If possible, test the power adapter with another compatible device to ensure it is functioning.
- Kort batterilevetid:
- Sørg for, at batteriet er fuldt opladet før brug.
- Reduce screen brightness on the baby monitor.
- Disable unnecessary features (e.g., VOX sensitivity, continuous video streaming if not needed).
- Extreme temperatures can affect battery performance; ensure the monitor is used in a moderate environment.
- Skærmen tænder ikke:
- Bekræft, at batteriet er korrekt installeret og fuldt opladet.
- Connect the monitor directly to its power adapter to see if it powers on without the battery. If it does, the battery may be faulty or not properly connected.
If issues persist after attempting these steps, please contact AOLIKES customer support.
Specifikationer
| Modelnummer | Y24ACBAA1 |
| Batteritype | Lithium Polymer Battery (Li-Po) |
| Kapacitet | 1750mAh |
| Nominel bindtage | 3.7V |
| Limited Charge Voltage | 4.2V |
| Magt | 6.475Wh |
| Cutoff Voltage (Discharged) | 2.95V |
| Kompatible enheder | BOIFUN VB608 M, BOIFUN BM922 M 4.3" Screen Baby Monitors |
| Pakkedimensioner | 2.8 x 1.57 x 0.28 tommer |
| Varens vægt | 1.13 ounce |
| Fabrikant | AOLIKES |
| Oprindelsesland | Kina |
Garanti og support
For warranty information and customer support regarding your AOLIKES 1750mAh Battery, please contact the manufacturer directly or refer to the documentation provided with your purchase. You may also visit the official AOLIKES store on Amazon for further assistance: AOLIKES Store.