Indledning
The WOWOBONTOY WL K170 RC Helicopter is a high-performance, remote-controlled aircraft designed for hobby enthusiasts. Featuring a realistic UH-60L Black Hawk design, this model offers a stable and user-friendly flying experience with advanced features like a 6-axis gyro, one-key takeoff/landing, and intuitive 4-channel controls. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your WL K170 RC Helicopter.
Image: The WOWOBONTOY WL K170 RC Helicopter, a detailed replica of the UH-60L Black Hawk, displayed on its stand.
Sikkerhedsretningslinjer
Prioritér altid sikkerheden, når du betjener den fjernstyrede helikopter. Manglende overholdelse af disse retningslinjer kan resultere i personskade eller beskadigelse af produktet.
- Aldersanbefaling: Dette produkt anbefales til brugere på 12 år og derover. Voksenopsyn anbefales til yngre brugere.
- Flyvemiljø: Fly in open, clear areas away from people, animals, buildings, power lines, and water. Avoid flying in strong winds or adverse weather conditions.
- Tjek før flyvning: Before each flight, ensure all components are securely attached, batteries are fully charged, and the remote control is properly linked to the helicopter.
- Propelsikkerhed: Hold hænder, ansigt og løstsiddende tøj væk fra roterende propeller. Propellerne kan forårsage alvorlig personskade.
- Batterihåndtering: Use only the specified battery type. Do not overcharge or short-circuit batteries. Disconnect the battery after use and store it safely.
- Nødstop: Gør dig bekendt med nødstopfunktionen på fjernbetjeningen.
Hvad er der i æsken
Upon unboxing your WOWOBONTOY WL K170 RC Helicopter, verify that all components are present:
- RC Simulated Helicopter Model (UH-60L)
- 2.4G 4CH Remote Controller
- Rechargeable Flight Battery (Quantity may vary based on package)
- USB opladningskabel
- Displaystativ
- Helipad (Landing Pad)
- Reserve rotorblade
- Spare Tail Rotor
- Spare Gear
- Skruetrækker
- Brugermanual
Image: Key internal components and accessories of the WL K170 helicopter, including motors, gears, and the flight battery.
Video: An unboxing and initial setup demonstration of the WL K170 RC Helicopter, showing the contents of the package and basic assembly.
Opsætningsinstruktioner
1. Opladning af flybatteriet
- Carefully remove the flight battery from the helicopter.
- Tilslut flybatteriet til USB-opladerkablet.
- Sæt USB-opladerkablet i en passende USB-strømkilde (f.eks. en computers USB-port eller en USB-vægadapter).
- The indicator light on the USB charger will show the charging status (refer to charger instructions for specific light indications).
- Når det er fuldt opladet, skal du frakoble batteriet fra opladeren.
2. Isætning af batterier i fjernbetjeningen
- Åbn batteridækslet på bagsiden af fjernbetjeningen.
- Insert the required number of AA batteries (not included) into the compartment, ensuring correct polarity (+/-).
- Luk batterirummets dæksel forsvarligt.
3. Installing the Flight Battery in the Helicopter
- Open the battery compartment on the helicopter.
- Sæt forsigtigt det opladede flybatteri i batterirummet.
- Connect the battery connector to the helicopter's power port.
- Luk batterirummet.
4. Pairing the Helicopter and Remote Controller
- Placer helikopteren på en flad, jævn overflade.
- Turn on the helicopter's power switch. The indicator lights on the helicopter will flash.
- Tænd for fjernbetjeningens strømafbryder.
- Move the left throttle stick (Mode 2) all the way up, then all the way down.
- The indicator lights on both the helicopter and remote controller will become solid, indicating successful pairing.
Betjeningsvejledning
Fjernbetjening overview
Image: The 2.4 GHz four-channel remote control unit.
Image: Detailed diagram of the remote control, labeling each button and joystick function.
- 1. Strømafbryder: Tænder/slukker fjernbetjeningen.
- 2. Strøm LED: Angiver strømstatus og parring.
- 3. Speed Conversion: Adjusts flight speed modes (e.g., beginner, intermediate, advanced).
- 4. One-Key Takeoff / One-Key Landing: Starter automatisk start eller landing.
- 3 + 4. Emergency Stop: Pressing both buttons simultaneously activates an emergency stop.
- 5. Antenne: Transmits control signals.
- 6. Throttle/Directional Rocker (Left Stick): Styrer højde (op/ned) og drejning (venstre/højre rotation).
- 7. Left / Right / Front / Rear Joystick (Right Stick): Controls pitch (forward/backward) and roll (left/right side flight).
- 8. Front and Rear Trim Key: Justerer fremad/bagud-drift.
- 9. Fine-tune Keys Around: Justerer venstre/højre drift.
- 10. Long Press to Boot / Right and Left Hand Switch: Used for initial power-on and switching between control modes (Mode 1/Mode 2).
Grundlæggende flyveoperationer
- Start: After pairing, press the One-Key Takeoff button (4) or slowly push the left throttle stick (6) upwards to lift off.
- Højdekontrol: Use the left throttle stick (6) to increase (up) or decrease (down) altitude.
- Retningskontrol: Use the right joystick (7) to move the helicopter forward, backward, left, or right.
- Rotation (drejning): Move the left throttle stick (6) left or right to rotate the helicopter clockwise or counter-clockwise.
- Landing: Press the One-Key Landing button (4) for an automatic descent, or slowly pull the left throttle stick (6) downwards until the helicopter lands.
- Trimning: If the helicopter drifts without input, use the trim keys (8, 9) to stabilize its hover.
Video: A demonstration of the WL K170 RC Helicopter in flight, showcasing its stability and maneuverability with the remote control.
Opretholdelse
Regular maintenance ensures the longevity and optimal performance of your WL K170 RC Helicopter.
- Rensning: After each flight, gently wipe the helicopter with a soft, dry cloth to remove dust and debris. Avoid using water or chemical cleaners.
- Propelinspektion: Regularly check the main and tail rotor blades for any signs of damage (cracks, bends). Damaged blades can affect flight stability and safety. Replace them with spare parts as needed using the provided screwdriver.
- Motorpleje: The 1106 brushless main motor and 720 coreless tail motor are designed for durability. Keep them free from obstructions.
- Batteriopbevaring: Store flight batteries in a cool, dry place, away from direct sunlight and extreme temperatures. Do not store fully charged or fully discharged for extended periods.
- Komponentkontrol: Periodically inspect all screws and connections to ensure they are secure.
Image: Close-up of the helicopter's aerodynamic design, highlighting the quadruple propeller blades, which should be regularly inspected for damage.
Fejlfinding
If you encounter issues with your WL K170 RC Helicopter, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Helikopteren reagerer ikke på fjernbetjeningen. | Not paired, low battery (helicopter or remote), remote out of range. | Re-pair the helicopter and remote. Charge helicopter battery. Replace remote batteries. Ensure within 100m control distance. |
| Helicopter cannot take off or lacks power. | Low flight battery, damaged propellers, motor issue. | Fully charge flight battery. Inspect and replace damaged propellers. Contact support if motor issue suspected. |
| Helikopteren driver afsted under svævning. | Needs trimming, uneven surface during takeoff, damaged propellers. | Use trim keys on the remote. Ensure takeoff from a flat surface. Check and replace damaged propellers. |
| Helicopter is unstable in flight. | Damaged propellers, incorrect flight mode, environmental factors (wind). | Inspect and replace damaged propellers. Ensure 6G mode is active for beginners. Fly in calm conditions. |
| Lav voltage alarm. | Flight battery is low. | Land the helicopter immediately and charge the flight battery. |
Specifikationer
- Model: WL K170
- Produktdimensioner: 10.45 x 10.24 x 2.83 tommer
- Varens vægt: 10.9 ounce
- Hovedmotor: 1106 Brushless Motor (11200Kv)
- hale motor: 720 Coreless Motor
- Kontrolkanaler: 4CH
- Frekvens: 2.4 GHz
- Flytilstande: 6-axis gyro (6G mode for stability)
- Flybatteri: 3.8V 800mAh 20C High Voltage High Rate Battery
- Opladning: USB-opladningsstik
- Flyvetid: Op til 8 minutter (omtrentlig)
- Kontrolafstand: Cirka 100m
- Anbefalet alder: 12 år og opefter
Image: Illustration highlighting the brushless main motor and coreless tail motor, key components for the helicopter's performance.
Garanti og support
For warranty information, technical support, or replacement parts, please contact WOWOBONTOY customer service directly through the retailer where the product was purchased or visit the official WOWOBONTOY website. Please have your model number (WL K170) and purchase details ready when contacting support.