Protmex YT606 Temperatur- og fugtighedsmåler Brugermanual

Indledning

The Protmex YT606 is a high-precision digital hygrometer designed for accurate measurement of ambient temperature, relative humidity, wet bulb temperature, and dew point temperature. It features a Swiss-made STH 45 semiconductor sensor for quick and reliable data collection. This manual provides detailed instructions for the proper use, maintenance, and troubleshooting of your device.

Figure 1: Protmex YT606 Temperature Humidity Meter with accessories.

Sikkerhedsoplysninger

• Udsæt ikke enheden for ekstreme temperaturer eller direkte sollys i længere perioder.
• Undgå at tabe enheden eller udsætte den for kraftige stød.
• Do not disassemble or attempt to repair the device yourself. Refer to qualified personnel for service.
• Keep the device away from water and high humidity environments unless specified for such use.
• Ensure correct battery polarity when installing batteries. Remove batteries if the device will not be used for an extended period.

Produkt overview

The Protmex YT606 features an intuitive design with a clear LCD display and easy-to-use buttons. Below is a diagram illustrating the main components and controls.

Figure 2: Main components and functions of the YT606 meter.

Nøglefunktioner:

• Højpræcisionssensor: Equipped with a SWITZERLAND STH 45 semiconductor sensor for accurate and quick measurements.
• Flere måletilstande: Measures ambient temperature, relative humidity, wet bulb temperature, and dew point temperature.
• LCD baggrundsbelysning: Bright display for easy reading in various lighting conditions.
• Datafunktioner: Includes MAX/MIN value display, Data Hold, and Data Preserving (up to 99 groups).
• Enhedskonvertering: Skift nemt mellem Celsius (°C) og Fahrenheit (°F).
• Energibesparelse: Features a 30-minute auto-shutdown function (can be canceled) and a low battery indicator.
• Holdbart design: Double injection precision case made of ABS material for anti-dust, anti-slip, and anti-drop protection.

Opsætning

Batteri installation:

The Protmex YT606 requires 4 AAA batteries (included). Follow these steps to install them:

1. Find batterirummet på bagsiden af ​​enheden.
2. Brug den medfølgende skruetrækker til at åbne batteridækslet.
3. Isæt 4 AAA-batterier, og sørg for at polerne (+/-) vender korrekt som angivet inde i batterirummet.
4. Sæt batterirummets dæksel på igen og fastgør det med skruen.

A low battery indicator will appear on the LCD screen when the batteries need to be replaced.

Betjeningsvejledning

Tænd/sluk:

• Tryk på Power-knap (①) for at tænde enheden.
• Tryk og hold på Power-knap (①) for a few seconds to turn the device off.

Måletilstande:

The YT606 offers four primary measurement modes:

• Omgivelsestemperatur: Displays the current air temperature.
• Relativ luftfugtighed (RH): Viser procententage of moisture in the air relative to the maximum amount it can hold at that temperature.
• Wet Bulb Temperature (WB): The temperature read by a thermometer covered in water-soaked cloth over which air is passed.
• Dew Point Temperature (DP): The temperature at which air becomes saturated with water vapor and dew begins to form.

To switch between Dew Point (DP) and Wet Bulb (WB) temperature displays, press the DP/WB button.

Figure 3: The four primary measurement modes of the YT606.

Note: For stable and accurate readings, especially when moving the device between different environments, allow approximately 10 minutes for the sensor to adapt to the new conditions before taking measurements.

Enhedsskift (°C/°F):

To switch the temperature unit between Celsius (°C) and Fahrenheit (°F), short-press the °C/°F knap.

Figure 4: Switching between Celsius and Fahrenheit units.

Datahold funktion:

To hold the current measurement on the display, short-press the H (Hold) knap. Press it again to release the data hold and resume live readings.

Figure 5: Using the Data Hold function.

MAX/MIN Value Display:

Til view the maximum or minimum recorded values since the device was powered on or reset:

• Tryk på MIN/MAX knap once to display the maximum (MAX) values.
• Tryk på MIN/MAX knap again to display the minimum (MIN) values.
• Tryk på MIN/MAX knap a third time to return to live readings.

Figure 6: Displaying Maximum and Minimum recorded values.

Data Logging (MEM/READ):

The YT606 can store up to 99 groups of data.

• To store the current reading, press the MEM-knap.
• For at genkalde gemte data, tryk på READ knap. Use the up/down arrow buttons to navigate through the stored data groups.

Figure 7: Data logging and recall functions.

Baggrundslys funktion:

To turn the LCD backlight on or off, press the Baggrundslys knap (✱).

Figure 8: The bright LCD display with backlight for enhanced visibility.

Automatisk sluk:

The device is set to automatically shut down after 30 minutes of inactivity to conserve battery life. This feature can be canceled if continuous operation is required. Refer to the full user manual for instructions on how to disable this function.

Figure 9: Energy-saving features: Low Battery Indicator and Automatic Shutdown.

Opretholdelse

• Rensning: Brug en blød, tør klud til at rengøre enheden. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Opbevaring: When not in use for extended periods, store the device in a cool, dry place. Remove batteries to prevent leakage.
• Sensorpleje: The high-precision sensor is delicate. Avoid touching it directly or exposing it to dust and debris.

Fejlfinding

Specifikationer

• Model: YT606
• Mærke: Protmex
• Temperatur nøjagtighed: 0.5°C
• Strømkilde: 4 AAA batterier (medfølger)
• Dimensioner: 7.83 x 3.62 x 1.93 tommer
• Vægt: 7.83 ounce
• Sensortype: SWITZERLAND STH 45 Semiconductor Sensor
• Datalagring: Op til 99 grupper
• Automatisk nedlukning: 30 minutter (kan aflyses)

Hvad er der i æsken

• 1 x Protmex YT606 Temperature Humidity Meter
• 4 x 1.5V AAA batterier
• 1 x farveboks
• 1 x tøjpose
• 1 x Brugermanual (dette dokument)
• 1 x skruetrækker (til batterirum)

Garanti og support

Protmex is committed to providing quality products. The YT606 Temperature Humidity Meter comes with a 12 måneders garanti fra købsdatoen.

For any questions, technical assistance, or warranty claims, please contact our professional customer service team. We offer 24/7 support to ensure your satisfaction.

Please refer to the contact information provided on the product packaging or the official Protmex webwebsted for de mest opdaterede supportkanaler.