WONLINK WiFi6 3601B1 WLAN Amplivligere brugervejledning

1. Introduktion

Thank you for choosing the WONLINK WiFi6 3601B1 WLAN Amplifier. This device is designed to extend your existing wireless network coverage, eliminate Wi-Fi dead zones, and provide a stable, high-speed internet connection throughout your home or office. Featuring WiFi6 (802.11ax) technology and dual-band support (2.4 GHz and 5 GHz), it delivers data transfer speeds up to 1500 Mbps, ensuring a seamless experience for all your connected devices, including mobile phones, computers, smart TVs, printers, webcams, and gaming consoles. Please read this manual carefully before use to ensure proper installation and operation.

Billede 1.1: Forside view of the WONLINK WiFi6 3601B1 WLAN Amplifier. The device is black with two adjustable antennas, a central WONLINK logo, and a blue LED indicator for WiFi6 status.

2. Sikkerhedsoplysninger

• Do not expose the device to water, fire, excessive humidity, or extreme temperatures.
• Do not attempt to disassemble, repair, or modify the device. Contact qualified personnel for service.
• Ensure the power outlet is easily accessible and the device is unplugged during electrical storms or when unused for long periods.
• Brug kun den medfølgende eller anbefalede strømadapter fra producenten.
• Hold enheden væk fra varmekilder og direkte sollys.
• Placer enheden i et godt ventileret område for at forhindre overophedning.

3. Pakkens indhold

Kontroller venligst, at alle varer er til stede i din pakke:

• WONLINK WiFi6 3601B1 WLAN Amplivligere
• Ethernet kabel
• Hurtig installationsvejledning

4. Produktet er slutview

Gør dig bekendt med enhedens komponenter:

• Antenner: Two external, adjustable antennas for optimal signal reception and transmission.
• LED-indikatorer:
  • Power LED: Indikerer strømstatus.
  • WiFi-LED: Indikerer trådløs forbindelsesstatus.
  • WPS LED: Angiver WPS-funktionens status.
  • LAN LED: Angiver status for Ethernet-portforbindelse.
• WPS knap: For quick and secure connection to a router via Wi-Fi Protected Setup.
• Nulstil knap: Used to restore the device to factory default settings. Press and hold for approximately 5-8 seconds.
• LAN/WAN-port: An Ethernet port that can function as either a LAN port (in Repeater mode) or a WAN port (in AP mode).

5. Opsætning

The WONLINK WiFi6 3601B1 WLAN Amplifier supports two main setup methods: WPS and Web browsere.

5.1. Method 1: WPS (Wi-Fi Protected Setup)

1. Plug the WLAN Amplifier into a power outlet near your main router. Wait for the Power LED to turn solid.
2. Tryk på WPS-knappen på din primære router.
3. Within two minutes, press the WPS button on the WLAN Amplivligere.
4. The WPS LED on the amplifier will flash during the connection process and then turn solid when successfully connected.
5. Once connected, you can unplug the amplifier and relocate it to a suitable position within your home or office.

5.2. Method 2: Web Browser opsætning

1. Plug the WLAN Amplifier into a power outlet.
2. Connect your computer or mobile device to the amplifier's default Wi-Fi network (e.g., "WONLINK_EXT" or similar, check the label on the device). No password is required initially.
3. Åbn a web browser (e.g., Chrome, Firefox) and enter the default IP address or domain name (e.g., 192.168.10.1 or re.wonlink.com) i adresselinjen.
4. Follow the on-screen instructions of the setup wizard. You will typically be asked to create an administrator password, select your desired operating mode (Repeater or AP), and configure network settings.
5. For Repeater Mode, select your main Wi-Fi network from the list and enter its password. The amplifier will then extend this network.
6. For AP Mode, connect an Ethernet cable from your main router to the amplifier's LAN/WAN port. The amplifier will then create a new Wi-Fi network.
7. Efter konfigurationen amplifier will restart. You can then connect your devices to the new extended or access point network.

6. Driftstilstande

The WONLINK WiFi6 3601B1 supports two primary operating modes:

6.1. Repeater-tilstand

I repeatertilstand, amplifier wirelessly connects to your existing router's Wi-Fi network and extends its coverage. This mode is ideal for eliminating Wi-Fi dead zones and improving signal strength in areas with weak coverage. The extended network will typically have the same name as your main network with "_EXT" appended (e.g., "MyHomeWiFi_EXT").

6.2. AP (Adgangspunkt) Tilstand

I AP-tilstand, amplifier connects to your router via an Ethernet cable and broadcasts a new wireless network. This mode is suitable for converting a wired network connection into a wireless one, providing Wi-Fi access in areas where only wired connections are available.

7. Betjeningsvejledning

Når amplifier is set up in your desired mode, you can connect your wireless devices to the extended or new Wi-Fi network. The network name (SSID) and password will be the ones you configured during the setup process.

• Tilslutning af enheder: On your smartphone, tablet, or computer, search for available Wi-Fi networks. Select the SSID of your extended or AP network and enter the password.
• Optimal placering: For best performance in Repeater Mode, place the amplifier halfway between your router and the area where you need improved Wi-Fi coverage. Ensure it receives a good signal from your main router.

8. Vedligeholdelse

• Firmwareopdateringer: Periodically check the WONLINK official website for firmware updates. Updating the firmware can improve performance, add new features, and fix bugs. Follow the instructions provided on the website for safe updating.
• Rensning: Rengør enheden med en blød, tør klud. Brug ikke flydende rengøringsmidler eller rengøringsmidler på sprayform.
• Nulstilling: If the device is not functioning correctly, you can perform a factory reset by pressing and holding the Reset button for 5-8 seconds while the device is powered on. This will erase all custom settings, and you will need to reconfigure the device.

9. Fejlfinding

If you encounter issues with your WLAN AmpLifier, se følgende almindelige problemer og løsninger:

• Ingen strøm: Sørg for amplifier is securely plugged into a working power outlet. Check the Power LED.
• Cannot Connect to the Amplifier's Wi-Fi:
  • Bekræft, at amplifier is powered on and the WiFi LED is active.
  • Ensure you are selecting the correct network name (SSID) and entering the correct password.
  • Try restarting the amplifier and your connecting device.
• No Internet Access After Connecting:
  • In Repeater Mode, ensure the amplifier is receiving a strong signal from your main router. Relocate the amplifier closer to the router if necessary.
  • Bekræft, at din primære router har en aktiv internetforbindelse.
  • Reconfigure the amplifier via the web browser setup to ensure it is correctly connected to your main network.
• Langsom forbindelseshastighed:
  • Flyt amplifier to an optimal position, ideally halfway between your router and the desired coverage area, avoiding obstacles.
  • Kontrollér for potentiel interferens fra andre elektroniske enheder (f.eks. mikrobølgeovne, trådløse telefoner).
  • Ensure your main router is also performing optimally.
• WPS Connection Failed:
  • Ensure your router supports WPS and that the WPS function is enabled.
  • Try the WPS process again, ensuring you press the buttons within the specified timeframe.
  • Hvis WPS fortsætter med at fejle, skal du bruge web browseropsætningsmetode.

10. Specifikationer

11. Garantioplysninger

WONLINK products are covered by a limited warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use. This warranty does not cover damage caused by accident, misuse, abuse, unauthorized modification, or external causes. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the official WONLINK webwebsted eller kontakt kundesupport.

12. Teknisk support

If you require further assistance or have questions not covered in this manual, please visit the official WONLINK website for FAQs, troubleshooting guides, and contact information for technical support. Our support team is available to help you with any product-related inquiries.